You're Overreacting About LEGO Clone Troopers

[@brickmasterharri]

Become a member today to win a Times Gate display and Lego at the end of each month! Only 1 member at this moment so your odds to win will be HIGH

[@gag-dodgers]

👋

[@derrickhuff6234]

Thank you finally somebody that gets me these little kids whining because they didn’t get 100% accurate minifigure it’s not that deep it’s a plastic figurine that goes with what your building

[@Purple_Stud]

@@derrickhuff6234I think everyone is allowed their own say in this argument but I wouldn’t say little kids care about quality as they don’t have to buy sets for themselves I think it’s mainly nerdy (not in a bad way) teens and adults who collect their Lego just for the figures and their value

[@noahalbers8037]

A lego ambassador awesome

[@FabuBrik]

The misprint on the 212th helmet and the waist capes are far bigger issues. There's no doubt the holes are not ideal, but probably more just that people are sick of hearing about the helmet holes. Great video. I was hard on you on some previous LAN videos but I do really appreciate your genuine joy for the hobby. It's far easier to go down the path of hating on every little thing about the sw theme and your optimistic approach is a breath of fresh air.

[@brickmasterharri]

I do think the printing can be better for sure like Fox and 212th! Thanks for the positive words bro I really appreciate it. Thanks for being apart of this community🙌

[@G4yLord346]

​@@brickmasterharriI think that the fact that lego themselfs photoshopped ti down on the 501st packaging is enough for me best clones = clone army customs

[@Quinn_Bailey67]

It’s a TINY little triangle you can’t even see from far away I jus don’t get it 😭

[@G4yLord346]

@@Quinn_Bailey67 but there slogan js only the best is good enough

[@Sashin-d8t]

@@Quinn_Bailey67yeah the marking on the pilot in the UCS gunship were also off, why is everyone complaining

[@generalveers9544]

The only changes to new clones that bother me is the waist capes (I had to be told that’s what they were on the officer in the second 501st pack because they’re so non-apparent) and the printing on Fox is pretty sad with how inaccurate they made it. Helmet holes are such a non issue though

[@brickmasterharri]

dual molded legs would be dopeee

[@generalveers9544]

@@brickmasterharri LEGO seems allergic to duel mold unless it’s a figure in a CMS or a $300+ set

[@LayersonLayers]

Most average lan video

[@Sashin-d8t]

@@brickmasterharrimaybe add an optimal cloth option

[@transformandgobricks7820]

I don't hate the Helmet holes on the recent Clone Trooper figures. Seriously, people are over their heads with the hate over new holes on the helmets! Guys please, if Lego group had decided that they should make the holes lower, the accessories would have been looking very weird on the helmets, there just wasn't any other way to do that for them!

[@spencerboerboom4043]

It would've been fine if they would've taken the MOLDED HOLES off. At the end of the day I think they look bad but not bad enough to stop me from building my army

[@Sashin-d8t]

It just looks kinda ugly now

[@cpafol]

I don't think I'm overreacting about LEGO Clones. If I was overreacting, IT WOULD LOOK LIKE THIS 🤯🤯

[@axlebrix9993]

thanks for choosing my comment dude and great vid. praying that we get more Old Republic sets in the future 🙏🏽🙏🏽

[@brickmasterharri]

No problem bro I had to show the Old Republic sets some love🔥

[@Thatonekid1579]

The helmet holes don’t bother me but the printed on waist capes do it looks like a karate belt and is it really that hard to bring back real waist capes.

[@Sashin-d8t]

No 4 billion dollar profits doesn’t leave enough money to spend a miniscule amount on adding optional kamas

[@Caosespacial257]

I don't have a problem with helmet holes and I'm glad I can finally have phase 2 clone troopers with visors and stuff, but I think our responsibility as consumers is to complain if we feel that the product we are buying doesn't meet the expectations we are paying for, so I totally respect and support those who complain about the holes or anything that lego does, doesn't matter how toxic they can be. Every single fandom has a group of angry toxic fans and start a witch burning of everybody who doesn't loves legos unconditionally to clean the fandom does nothing but to turn the fandom an unwelcoming place.

[@spencerboerboom4043]

I agree with your take. I have more issues when Lego messes up the printing on clones than how ugly they made helmet holes ( Which could've looked good)

[@Sashin-d8t]

Bro everyone hates toxic fans complaining but when they complain and attack Lego we generally get a better product e.g the 501 battle pack

[@MrScaryPasta]

I wish we could’ve gotten sets for Star Wars TFU series. I was saddened that LEGO only made one official set based on such a great game franchise. We need more love for Star Wars games from the EU old and new. 😢

[@blackbirdmotionstudios7423]

The problem is they should do both movie accurate design and animated design like back in 2014. The new hybrid is weird and they made the choice to save money. The design prints overall is very bad for clones for some reason. 212th and fox for example

[@Imperial23_]

While I think Captain Rex being in a Microfighter set is kind of a marketing ploy, I think it was a missed opportunity. I think they should have made a full-scale version of the blue Y-wing as we haven't had a Republic era Y-wing since the first one back in 2008.

[@brickmasterharri]

Me toooo

[@otminealnamer1385]

I think the clones are just fine under the sense that compromises have to be made, and playability/compatibility>detail; I think that philosophy is what makes lego so great in the first place. That's why I think waist cloaks were removed; the plastic ones were horrible imo, even if they looked decent, because you couldn't bend their legs without taking it off(I remember having the old clone battle pack with the walker, and the captain couldn't move his legs at all). The cloth ones were better, but you still couldn't sit them down on studs as easily and the fabric would eventually rip over time. The printed ones don't look great, but the figures have full range of motion, which is great in itself. I simple side printing of the legs would help make it look good enough without risking range of motion like the old ones did. Looks certainly matter, but they should never overrule compatibility, and playability. The same thing can be applied to the helmets, so I think the helmets we got are pretty good. I also tend to enjoy playscale sets more as well, or at least sets with lots of interesting build techniques, which often entails play sets because of the clever design required to fit play features inside a model. When you don't have to worry about play features, the build process is much simpler. I can't really get into capital ship UCS sets, or things like helmets, because the way they're built is kind of tedious. To me, the playscale sets are the heart and soul of lego sets, and what it's really all about. I also really like micro-scale builds because of the creativity required to represent a larger object on such a small scale, yet so many seem to gloss over them. It really came as a shock to me to see so much jaded cynicism regarding star wars lego after not partaking in the hobby for 12+ years and coming back to it. Lots of entitlement and too much focus on "investing"(scalping, more like), too much focus on exclusive minifigures, not enough hype around how fun the sets are themselves(same thing happens with transformers toys, sadly). Figures are great and really bring a set together, I get it, but they're just a cherry on top of the ice cream sundae. Really love the positive takes here that sees lego for what it is, rather than wishing it'd be something different, subbed!

[@spencerboerboom4043]

There is a reason why waist capes are removable 😂😂 Taking them out takes away from the people that enjoy them. The new printed ones are lazy and not good looking as is

[@Sashin-d8t]

Sorry but I have to disagree the cloth ones were perfect but the you can sit the clones without the old cloth ripping, and I think the reason they changed is to save money and make more money by increasing the price. If they really did want to help they would have done a 360 Kama print

[@frankiek_1]

The thing I can agree with is the lack of waist capes, but I do not mind the helmet holes at all, though I will admit in front view it does make the helmets look off but it doesn’t bother me. What does really bother me is like you said how they are trying to combine the animated and movie styles for their prints. While it is nice to have consistency between different kinds of clones, I would still prefer having the more realistic movie versions for phase II clones

[@michellerahe4853]

Honestly I miss the colored arm prints. It represented the stripes going down their arms depending on their legion

[@brickmasterharri]

Mmm interesting! Haven't thought about that

[@Purple_Stud]

Honestly I like when the whole arm was the colour of the stripes in 2014

[@michellerahe4853]

@@Purple_Stud yee cause it signified more of the legions colors

[@swampy3805]

I can look for good deals on lego star wars minifigs, to see if I can make some money. But I don't get the idea of buying a set just to keep it sealed for like a decade. Figs I get but not sets.

[@Not_Incorrection]

i finally decided to play the old republic when i heard you talk about it and i named me mayn ayolis and i realised i wanted to name myself ''squirter of the creamy liquid'' how to change name

[@AKguru762]

Re-sellers have ruined every hobby. Starting with concert tickets and all the way to Lego.

[@brickmasterharri]

Mmm that's interesting to think about

[@neptunemacaw3354]

Helmet holes and lack of fabric camas has grown on me. Especially with Lego’s valid reasons, but there is no defending the inaccurate and low quality printing that appears on the 212th trooper and captain fox.

[@08Elizer]

4:18 people just don’t understand that people have opinions and there is a difference of hating on it and just letting them be

[@Sashin-d8t]

In my opinion kamas are a worse issue, and people aren’t worrying enough about them

[@omarbaba9892]

I can get some people liking the holes but it’s completely undeniable that there is a distinct lack of quality with clone figures compared to pretty much every other Star Wars figure The fact they make such intricate moulds and prints for every new stormtrooper variant yet can’t get Fox’s chest armour the right colour is just pathetic

[@joshuasparks7076]

To be fair lego investors and influencers also technically keep the secondary market prices lower that they could be if no one was buying the sets. To elaborate with out investors maybe only 5 sets get sold and then after retirement the prices double because there is a limited supply in the secondary market. However investors buy large quantities and influences encourage others to buy more. Now the secondary market after retirement has 500 vs 5. Therefor more supply after retirement. Numbers are obviously down sized for sake of compression.

[@LLegaLLizeITxC2]

i can live with the helmet holes, but they do look better without. Commanders like cody or fox kinda need their own mold, and then the normal troopers could have proper helmets

[@BossBast1]

Personally, I liked the the og helmet having wider visors, especially on white phase 2 clones. holes are annoying for no reason, they should have though how to make it better, or be in place. Honestly I would rather have old molds and no accessories holes at all. an new special dual mold for the visor helmet.

[@phoenixproductions2846]

About the clone animated/live action style, I wish they just kept the 2014 live action style but swapped the legs for the new ones and just made all the designs even the CW ones with that style

[@Samfan4Films777]

The main problem is LEGO just turned their backs on their fans and lied to them countless times. Such as with the box art for the AT-TE, and having Waistcapes in Dreamz and Avengers but not Star Wars. They know what they're doing is wrong, but for some reason they hate us.

[@jdbricks9266]

Bruh, they made a 501st battlepack because fans asked for it, they made a UCS gunship because fans asked for it, they made captain Cody because fans asked for it. The hole helmet holes thing is because fans asked for it, if something LEGO actually listens to the fans and gives them the sets they want. But yeah, just because of a render issue and waistcapes “lEgO hAteS uS”, bruh come on 😂😂😂

[@danielleighton4161]

I remember seeing one of those channels that unboxes hauls of figures to resell and they dont even care about the figures themselves but rather the resell value. Theyll just ignore really cool figures because theyre either not super expensive or came out that year.

[@brickmasterharri]

So true😂

[@WWNbroadcasts]

Oh my god this is literally so real And I have to say your positivity is way better then critique after critique

[@brickmasterharri]

Thank you so much bro🙌

[@SilentSamurai73]

Mandr fr

[@WWNbroadcasts]

@@SilentSamurai73 fr bro can’t he be positive

[@WWNbroadcasts]

@@brickmasterharri no problem bro your videos always entertain me and make me smile 👍

[@SilentSamurai73]

@@WWNbroadcasts like i love his videos but he always complains about the same stuff. (helmet holes)

[@CC--qn4gf]

Finally a LEGO Star Wars KZbinr that is able to see more than one perspective.

[@Knvctyy30]

IDC about the helmet holes , LEGO IS A LEGO MAHH BOIII❤️

[@brickmasterharri]

OUR BOIIII

[@lawriehinchliff]

I personally think the helmet holes should be on figures that are meant to have accessories, not all of them

[@glowinggames1561]

Me personally I don't care about helmet holes or misprints. If anything I like helmet holes because I can put all those visors and antennas you get from the pack of the clones with the Ahsoka helmets on my 212th figures.

[@Damon007_]

I love the idea of helmet holes but Lego for some reason put them in the wrong place, to add on to that they give the clones printed waist capes, lego really need to up their game.

[@Ementhe]

Ngl by the thumbnail i think the gray visor works for fox

[@idiotindisguise8382]

I do love the fox mini fig, not gonna lie Also, DAMN!!!!!!! Cheap Rex set!?!?!? Hella excited for that

[@Eisenwald64]

About the helmet holes, perhaps it's and isseu of blending the holes themsevles with those round parts below them, though they may look misaligned with the visor.

[@brickmasterharri]

that is the main probelm😟

[@armandwintjens8567]

P2 fox is good he is my favoriet clone in lego and the 2013 rex😊😊😊😊😊😊😊😊😊

[@Sir_Whooo]

I agree is just the waist capes

[@Btomaek]

the holes are just too high they could have made the models better

[@BJBrickStudios]

I hundred percent agree with everything you said in the video helmet holes don’t bother me either if there had to be one thing about the new clones that does bother me is in foxes case the pink look on his chest plate and with the 212 troopers the messed up helmet print it’s not a big deal but Lego could do a better job with printing, but that doesn’t stop me from adding new clone troopers to my collection.

[@TM-ii2zu]

First video I have seen of yours. I appreciate the positivity vs. the endless nitpicking of some other KZbinrs. Helmet holes are kind of crap. Save them for named figs or specialists. Its nice to have regulars without amy holes.

[@Sashin-d8t]

I love it when other people nitpick for me. Cause I don’t like doing it but when hundreds of other people do it for me Lego is forced to actually listen to fans

[@RandomnessM]

found you through shorts, staying for the full blown video content.

[@brickmasterharri]

I love to hear that! Thanks for your support🔥

[@Pnutbtrsprnkls]

My hot take is lego is going down hill. There are so many cool sets they still release each year but they seem to just have more and more problems. The quality control used to be the reason I thought lego was better than mega construx but even that's not very good anymore! So many sets I get with blue pieces don't even look that good with how inconsistent the dye Is. I really hope lego does better but until they do I'm gonna buy more mega construx instead

[@ItzPeanutzzz]

Finally someone who is positive

[@PASTAMASTA86]

You should honestly not be getting any hate. It’s cool to see a Lego Star Wars KZbinr being positive for once

[@ipp-dds]

helmet hole are good but in the wrong place

[@ryanjones7]

I fully disagree about those hot takes paying 140 dollars and some over priced battle packs and misprinted clones for some mid to down right trash clone troopers paying 140 should be peak lego clones and i can't forget about the printed cloth be better lego

[@spencerboerboom4043]

I like the idea of Commander Fox but Lego had terrible execution on his torso. After building him I was disappointed with how bad he looked. He's the worst looking clone Lego had ever made in my opinion obviously.

[@KaikuPen]

I don't care about the helmet holes, but its shocking how I don't hear more complaints about the ugly family guy stormtrooper helmets. At least the helmet holes don't stop the figure from turning their head. I'm holding off on picking up any sets with troopers in them because I have a feeling they will get changed like the Rebel fighter pilot helmets.

[@SoullessSith]

Agreed, we need the 2017 ones back

[@brickmasterharri]

FACTS

[@lucasvincent3021]

I myself will never willingly buy a fox figure I hate him for what he did to fives. If o ever get that gunship I’ll go out of my way to avoid him

[@omarbaba9892]

How do people not realise that long term investors benefit the community?

[@ThatLegoDude]

Hmm this makes sense…🤔 Also maybe they could make three types of clone helmets One with no holes One with one hole for a rangefinder One with two holes (which we already have)

[@Samfan4Films777]

Yes exactly!! They have billions

[@jdbricks9266]

From a business standpoint, that is not a good idea, simply because it is not worth it money wise. Plus, it would take out a lot of customization and playability for their target audience (4-15 years old) which counts for +80% of their income. The helmet holes are fine, people are overreacting al lot about it, if something they should try to fix the placement and make a separe visor mold for p2 clones, but again, that takes off the possibility of using the same attachment for both p1 and p2 clones, making it inconvenient for kid customers.

[@dolfin5613]

This is probably click bait but the P2 Fox is equally as bad at the P2 212 with the pink torso.

[@davidguerrero590]

Feel like I should’ve been more specific now. I meant to say that I think the newer Lego Star Wars sets aren’t as good as the older ones. The older ones I feel had more play features and just more bang for your buck. Like with the customizable republic gun ship you referenced in an older video. A ship that you can feel like is more unique. Compared to a 500 dollar venator that comes with a Rex.

[@brickmasterharri]

Ohh I gotcha! Regardless I enjoyed thinking about your Hot Take. I went on a little personal rant during it, but in no way was that aimed at you😂 Sorry for misrepresenting your take, but I think it provided an interesting way to think about things

[@davidguerrero590]

@@brickmasterharri no it’s all good. Literally right before you started to talk about that I was thinking I probably should’ve worded that better. I still liked hearing your opinions on the subject

[@tomedyy]

great takes!!

[@Brickboy_123]

Bros yapping 😂

[@Johnsbrickpost]

I agree completely!

[@Nick-1117]

Spread more positive vibes man🎉🎉🎉

[@KJ-Hits]

I love this cahnnel

[@Unit1-v9k]

I do give you credit for kinda click baiting the title of the video too make people react.

[@brickmasterharri]

Not clickbait though because technically that's a Hot Take I was responding too😂

[@liamis199]

👌 video keep up the great work!

[@scott9235]

Waist capes are really goofy but I see way too many complaints on helmet holes like grow up

[@The_BatmanDarkKnight498]

Mandrproductions needs to stop complaining so hard when he has the money to but multiple of the expensive sets on the shelves

[@Konichu35]

true

[@STARWARS-EDITZ69]

True

[@tmandoesgamesv2.018]

Going around saying everyone is over reacting and then saying in the title. “You’re over reacting “ is such a good way to get subscribers… they are literally our two spaces for the holes one that they plugged up and then one that they added on top of another hole. It looks like trash and it isn’t right. sorry that I’m not a wussy like you and I don’t lay over.

[@brickmasterharri]

The title was meant to reflect the Hot Takes that I started out the video with, not my personal opinion🙌 You're allowed to have your own opinion and I totally get where you're coming from.

[@jdbricks9266]

Helmet holes haters when someone has a different opinion than theirs: 😡🤬👺

[@tmandoesgamesv2.018]

@@jdbricks9266 there’s a difference between stating an opinion, and then being an shithead you clearly can’t tell the difference kiddo.

[@adamburgess311]

No we are not we are not overreacting

[@brickmasterharri]

😂 I promise that title is nothing personal, but only to represent the Hot Takes talked about in the video

[@adamburgess311]

@@brickmasterharri no no it is okay I know it is not personal

[@gag-dodgers]

Hi 👋

[@brickmasterharri]

hello

[@gag-dodgers]

@@brickmasterharri howdy 🤠 👋

[@Unit1-v9k]

Better idea, Lego a billion dollar company should give helmets holes too the clones that need and and give physical waste capes too clones. Redesign the visors to be more accurate to Star Wars, and fix the miss prints on all clones to be more accurate to the clones wars or episode 2/3.

[@Banana_Oil]

We really aren’t tho the new Lego dreamz line has waist capes so why don’t clones Lego could easily fix the helmet holes they did it before it’s just our company being lazy and not doing things that could actually get them more money (also you been doing a great job lately don’t listen to what other people say being positive about a set is a great mind-set to have)

[@brickmasterharri]

I get that for sure. Thanks for your kind words🙌

[@Viperreloads]

W vid I’m now gonna try collecting Lego clones but right now I only have 1 clone from the Christmas advent calendar 🥲 donations here!

[@cutestcreeper569]

4:59 How the heck did everything described about the lego collector genuinely describe me perfectly? I literally have entire oc's and storylines planned out!

[@brickmasterharri]

😂😂

[@ryanjones7]

I fully disagree about those hot takes paying 140 dollars and some over priced battle packs and misprinted clones for some mid to down right trash clone troopers paying 140 should be peak lego clones and i can't forget about the printed cloth be better lego

[@Lego___91st___Clone]

The 2003 cloud city was fantastic for its time, it may be a little outdated but it was way ahead of its time

[@brickmasterharri]

Yea! I don't think the set is worth thousands of dollars, but it's a pretty good play set!

[@Lego___91st___Clone]

@@brickmasterharri Yeah but its definitly worth the original retail price

[@GrantGraff]

For the time yes, $100 dollars was pretty good.

[@Habsfan56744]

So think about it if the clones now a days didn’t have helmet holes everyone would probably be complaining that we can’t customize clones and put things like Marco binoculars on them

[@brickmasterharri]

Mmmm good point🤣

[@Samfan4Films777]

No I don't think so because no one ever complained about that with the regular phase 2 helmets.

[@Habsfan56744]

@@Samfan4Films777 fair point

[@jdbricks9266]

@@Samfan4Films777no, a large part of Lego sw fans were complaining that there were no helmet holes in p2 clones, that is exactly why Lego changed the mold after 8 years of non-holed helmet mold.

[@legoroan9866]

@@Samfan4Films777they complained ALL THE TIME

[@scottdavis_34]

Harrison coming in 🔥 with this vid!! I’ve always felt like many of us (myself included) have been so focused on what’s coming next that we forget to enjoy what we already have.

[@brickmasterharri]

Thanks Scott! I sometimes find myself thinking that too

[@backslay]

helmet holes are not that bad, but lego HAS TO start giving us cloth waistcapes again

[@Sashin-d8t]

No that would be too expensive for an already overpriced battle pack

[@GrantGraff]

The only figures that needs it is Captain Rex. Maybe commander Cody and Commander Fox. But other than that their good. 👍

[@Sashin-d8t]

@@GrantGraff the clone gunner clone officer as well?

[@rhkgboptbigrjkbj]

for me its not the helmet holes its not anything like that its the blatant false advertising on the at-te. its clear lego knows its a mistake but are unwilling to fix it so they simply make it perfect on the box and hope no one will notice.

[@brickmasterharri]

I do agree with you there! I talked about the bad rendering jobs in one of my other videos and focused on that point. I don't blame the Clones themselves for that stuff, but instead just blame Legos design team😂

[@rhkgboptbigrjkbj]

@@brickmasterharri the clones are good lol. i like them a lot havent had the chance to get the gunship yet but i really like the 212th ones

[@Silly_man_doorbreaker]

Hot take people in this community now are just angry all the time

[@Qui-GonJinn1234]

True

[@-Seek-17]

The reason is most likely the pricing issues nowadays.

[@Sashin-d8t]

Hot take but Lego prices their sets too high, even if you factor in inflation

[@-Seek-17]

@@Sashin-d8t yeah that's what I'm saying!

[@Silly_man_doorbreaker]

I posted this half a year ago why is only getting attention now

[@quicksaber6562]

I subscribed because of this video, the positivity and chill opinions about actually trying to enjoy the hobby makes me appreciate and respect you. Comparatively, when I watch super turbo Lego youtubers like MandR (no hate towards him, I just feel stressed out when I sit down to watch a Lego video and it feels like a school report) it feels like they have to complain about helmet holes each video as a whole separate hobby.

[@Sashin-d8t]

I think he might be scared of losing his LAN because he is excusing Lego on clear cost anti consumer changes, like the lack of physical kamas

[@MarcellGal-ey2ty]

Costumaze clones that would be good. (sorry i might wrote this wrong)

[@zacharymessner6157]

I actually really like how they combined the animated and live action to finally have one consist look for the clones but the helmet holes are just awful ruining the whole profile of the helmet and they really should be including waist capes it seems like they’re just being plain lazy

[@Poison_Paradise]

I mostly agree! I think helmet holes should be lower, and the molds for the attachments should be changed to accomodate that! But as they are now, I'm not overly pressed about it. I _am_ overly pressed about the kamas though- they are just awful. If they had fully connecting side leg printing, or had double-printed (for the white) dual molded legs, then I would have 0 issue with a lack of physical kamas.

[@britneyaustin2110]

really enjoyed this video🤩 could listen to you talk about lego all day!

[@brickmasterharri]

and you eventually will😉

[@TheonetrueMeadow]

i think your absolutey right about helmet holes idc if they have them i care bc i have the figure everybody talks bad about them they are good i like what you said good job im happy i found a postive person on youtube you earned a subscriber :3

[@yoboi9504]

The complaining has literally gone too far, Lego Star Wars fans need to take a break from collecting😑

[@G4yLord346]

Hes a lego member trust nothing he says

[@davidsui4940]

im just recently getting into the lego star wars space, and the amount of negativity is turning me away from a lot of the content both from creators and from lego, so its nice to listen to someone who actually tries to be positive

[@Sashin-d8t]

I think it’s the price increases. If the prices were actually a good bang for your buck I think people would be a lot happier

[@Kriviach]

I always thought that the whole helmet hole debate was so stupid, like jesus christ u can barely see them anyway whats the big deal, all they do is give u way more customization options which is amazing

[@Sashin-d8t]

Its cause imo they just look worse than the og ones. If they had just changed the moulded accessories (excluding the range finder) everyone would have been happier.

[@NateLyons-w6y]

100% Agree people are too sensitive about helmet holes. Grow up.

[@swstopmotions4390]

I don’t like them they could be better but it’s not actually to bad

[@iliadnetfear2586]

I think the Sequel sets had more play features for the same reason Prequel sets used to have more play features. My parents' generation grew up with the original Trilogy, my generation had Clone Wars and the Republic, now the next generation are getting the Sequels, so more play feature for younger fans.

[@JurassicWarz.124]

*Opinion exists The Lego Star Wars community: “I don’t even know who you are.”

[@Sashin-d8t]

Huh funny I have heard that exact comment 50 times

[@JurassicWarz.124]

@@Sashin-d8t Well it’s true.

[@jakecannanite4558]

I remember seeing a short from another collecter saying to look under shelves because sometimes people will hide sets they want to stash it until a sale. That kinda left a bad taste in my mouth. I know im a grown man buying toys but at least im not hiding them so a kid cant get to the toy first

[@LicheyLost]

I have no problem with helmet holes, what ticks me off is the waist capes, like i have a couple clones and like to display them but from afar you barely can see the printing on the legs compared to a cloth one that adds depth and style(i really like cloth elements in general tbh)

[@SzoltS1]

The thing is, if Mandr production says something, every casual lego collector will go insane over the same thing. Greatest examples are the "newer" droidekas and the new AAT. I think the new droidekas look far more superior to the ones from 2002, yet still people say the new ones suck and old are better becouse Mandr said the same thing. Same goes to AAT, "Terribly inaccurate and horrible looking", I love Star wars, and if I haven't heard for the 56th time from Mandr that it's "inaccurate", I wouldnt have noticed otherwise. The drama about the UCS Gunship was ridiculous as well, yet people still supported this guy bashing on such an amazing set, becouse of minifigures. Now this. The AT-TE became from a loved set to a quite disliked one on the internet, becouse he started mentioning how "horrible" looking the clones are in the set. I think they look good. Every stupid LEGO star wars drama has Mandr as the source. He has opinions, but people shouldn't follow them blindly.

[@brickmasterharri]

I'm not going to say I agree or disagree, but I appreciate you laying all that out. I've definitely seen my fair share of angry comments that all say a lot of the same things as him. Thought I don't blame him for having those opinions, but instead viewers for blindy mimicking them like you said. As long as everyone has a personal reason for their opinion than we good😎

[@Sashin-d8t]

@@brickmasterharriHow can you call your self a starwars KZbinr if you don’t block fans over little things

[@thefirstlegion19946]

Couldn’t agree more, the lego star wars community should be thankful we are getting so many clones but all they do is complain

[@brickmasterharri]

My mannn! You've been killing it with the content recently keep it up💪🔥

[@Izzymations-OFFICIAL]

I love this channel!

[@brickmasterharri]

Thank you!

[@Izzymations-OFFICIAL]

You’re welcome!@@brickmasterharri

[@Jgm1701]

They were perfect in 2013 :/

[@asuramaru4700]

I personally love the 212th 501st troopers people complaing cand easily get plastic or fabric robes from aliexpress to solve the issue... And for the holes get over it or put a visor on every figure not that hard at all

[@Purple_Stud]

Honestly I think we need more colour more varied price range and play features in Lego Star Wars sets because these past two years have been a drought for these factors with the only real colour being on the t-6 shuttle at least next years leak show really good sets at low prices but please more play features Lego all we have had this year is a cockpit a studshooter and a storage compartment if you’re lucky

[@deananimator1303]

In my opinion Lego has made some great sets the last few years a few examples: the at-te, the gunship, the ghost, Yasin 4, t-6 Jedi shuttle and many more

[@Sashin-d8t]

They could have just put them in the right place, but are still very nice, because Lego is willing to listen to fans as long as it doesn’t cut into their massive profits too much, such as spending 5 cents in already overpriced 20 dollar battle packs to include optional cloth kamas