YOU’VE BEEN WARNED! IGNITION SWITCH REPLACEMENT / GRASSHOPPER ZTR

Help support my Channel by checking out my extensive parts store here on amazon
➡️ Check out this page from THEMOWERMEDIC1
www.amazon.com...
TOOLS I USE DAILY
MILWAUKEE 3/8 socket set
➡️ amzn.to/3N3ulda
1/4” socket set
➡️ amzn.to/3MTyQaf
Oil evacuator
➡️ amzn.to/3MQM33P
Lawn mower lift
➡️ amzn.to/38lKhsr
#Kabota #ProLine #MotorOil #DieselOil #WarrenOil

[@borg386]

Thanks for the video! But what are the symptoms of a bad switch? I have the no click no start issue. Tons of videos on how to diagnose a bad switch, but none on why you would even think you have a bad switch. Thanks for any answers.

[@dbaby1446]

Dude did this with one hand Makes me feel better about doing it now lol

[@myronhodge3555]

Yep, compressed air is definitely your friend. Well, unless you’re in a crowded elevator. 😮 Just kidding, great point and video.

[@1anthonybrowning]

Always be on the look out for black widows. Likely spot the sloppy web first, that’s your warning to look carefully.

[@1thinkhealthy]

Thanks for the video. Learning new things everyday.

[@adnacraigo6590]

Thanks for the great advice.

[@mr1pearl]

I have a similar project only mine is on a snowblower ! Wish me luck 👍

[@donnielaurie3232]

From Don's Small engine repair I noticed that you didn't put any dialectical Grease on the prongs of the switch to keep it clean so they will not rust or do you have to use it

[@THEMOWERMEDIC1]

They don’t put none on at the factory?

[@Big_Johns]

Nice video Jeremy, thanks for the tips as usual brother. 👍🏼

[@Terry_Baker]

Great video as usual Jeremy!!

[@tdumford1]

just had to replace my switch on an old Simplicity. the switch was worn out and getting stuck. caused the starter solenoid to get fried.

[@tonywall8991]

Seriously there is not a decent video on the internet about rewiring a lawn tractor. Someone Seriously needs to show what wire goes where and what each one does. Including all safety switches. Mower medic, you are easy to follow and understand. How about having a go at it. Im trying to rewire a lawn tractor that Someone has gotten to bypassed all safety switches and done away with the ignition and hooked it up to a horn button. The mess of wires is incredible. The lady wants it put back to an ignition switch and all the saftey switches working. There is absolutely nothing i can find helpfull.

[@joebaucom4537]

Great !

[@hatteraslabuf]

Can you tell me what that repair would have cost your customer? That is, parts and labor?

[@briandriedger1221]

Just a suggestion. You might want to disconnect the battery.

[@THEMOWERMEDIC1]

Why? I love living on the wild side.

[@danielrobert7181]

Merci!

[@THEMOWERMEDIC1]

What’s that mean

[@danielrobert7181]

@@THEMOWERMEDIC1 = Thank you in French and is pronounced " mare-see". Regards !

[@Rein_Ciarfella]

Hey, Jeremy! The opposite of concave is convex. My ex-wife still calls me Mr. Word. ;-)

[@THEMOWERMEDIC1]

Cambered indeed!

[@Rein_Ciarfella]

@@THEMOWERMEDIC1 😂🔧👍

[@stephanied143]

My grasshopper mower doesn't shut off when you turn key off it's a 723 d think a switch would fix it

[@chriscostlow4210]

If it's a diesel it's the fuel solenoid. Until your ready to replace it you can reach under the hood and flip the arm on it by hand. Just Google what the fuel solenoid shutoff looks like so you know what to look for.

[@stephanied143]

@@chriscostlow4210 Thanks

[@sherrischneider2794]

What a mess, they never cleaned this unit . I hoped you disconnected the battery first.

[@Shootingstarcomics]

Dirt daubers always ruin my switches if I take the key out for five minutes.

[@Dan-xk2ty]

Don't quit your day job

[@THEMOWERMEDIC1]

😆😆😆