How To Produce Giant Roller Bearing & Hydraulic Cylinder. Other Enchanting Production Processes

Рет қаралды 274,548

10 ай бұрын

How To Produce Giant Roller Bearing & Hydraulic Cylinder. Other Enchanting Production Processes
0:17. Trepanning and boring steel tubes
5:19. Manufacturing process of big size roller bearings
7:32. Hydraulic cylinder manufacturing process
11:33. Production of hydraulic valves
12:43. HFC Milling Water Jacket
14:43. Manufacturing process for the landing gear component
17:48. Bearing manufacturing process
22:58. High-quality automotive components manufacturing
24:51. Valve Manufacturing Process
28:59. Multi-Turret Machining
---------------------------------
⚠️ Copyright Disclaimers
• We use images and content by the KZbin Fair Use copyright guidelines
• Section 107 of the U.S. Copyright Act states: “Notwithstanding the provisions of sections 106 and 106A, the fair use of a copyrighted work, including such use by reproduction in copies or phonorecords or by any other means specified by that section, for purposes such as criticism, comment, news reporting, teaching (including multiple copies for classroom use), scholarship, or research, is not an infringement of copyright.”
• This video could contain certain copyrighted video clips, pictures, or photographs that were not specifically authorized to be used by the copyright holder(s), but which we believe in good faith are protected by federal law and the fair use doctrine for one or more of the reasons noted above.

Пікірлер: 40

@JRo250 9 ай бұрын

Really liked this video. No dumb and annoying music, no wasted time showing irrelevant stuff, no flashy and unnecessary graphics. The audience of this topic is technical in nature and we don't care for superfluous stuff, just facts and technical data. Well done!

@timekeeperg9651 8 ай бұрын

i know not a thing of machining....but im completely and utterly amazed by those high precision machines and equipment!!! Its so mesmerizing to watch them to their thing!!! im retired now but had i seen these things and this trade in my teens i would definitely have pursued a career in engineering and machining!!! I just love it!!! Thanks for these ultra cool videos!!!

@kuojaohuang426 9 ай бұрын

marvellous!

@kevinbasden9896 4 ай бұрын

Although being fascinated by the videos that come from India in their machining and manufacturing processes this level of expertise and precision will forever be elusive there.

@cuba3433 10 ай бұрын

Thank you. I Like.

@thevoldemort92 2 ай бұрын

Nice video

@abundantharmony 9 ай бұрын

These are excellent and informative videos and there are 1k likes and somehow 500 dislikes. Idk how there are so many dislikes. Make NO sense at all.

@neon-john 9 ай бұрын

Very enjoyable video, though I wish you understood the processes instead of reading a script. One correction, and I'm not trying to be pedantic, is the separation between Quality Assurance (QA) and Quality Control (QC). Many people mix the two but they are quite distinct. QC is altering the manufacturing process, intermediate measurements and other optimizations to make sure the part is being made exactly to spec. QA is the post-manufacturing process that assures the product meets all specifications. This involves both non-destructive testing (NDT) such as ultrasonic testing, X-ray, Magnaflux and dye penetrant, among other things. Destructive testing (DT) involves stressing the various parts and the entire assembly until something breaks. Sectioning a heat treated part, followed by acid etching is a method to ensure that the proper thickness of hardness is achieved. Occasional samples are pulled from the production line for DT. DT is how the manufacturer of those oilfield valves can specify a maximum working pressure and an ultimate pressure, a point where failure is probable. QA testing often leads to feedback to the production line in both the processes and changes in QC procedures.

@christopherlong2301 8 ай бұрын

Totally scripted. It's also an AI voice.

@carlcarlson7654 9 ай бұрын

Lada was the official car of the KGB.

@TedBackus 9 ай бұрын

i really enjoyed this boring video 😁

@717pixels9 9 ай бұрын

lol

@OppoA-ie1qs 9 ай бұрын

ឆាុន្ ្ បន្ ្ នបនុុនុ

@OppoA-ie1qs 9 ай бұрын

ឆាុន្ ្ បន្ ្ នបនក។

@TomokosEnterprize 10 ай бұрын

Inconel is a bear to deal with. Been there and found out how.

@MichaelCowden 8 ай бұрын

The computer voice sucks but the video is super cool.

@YouCanDo_TV 8 ай бұрын

I'm very sorry for this inconvenience. In the past, I made a lot of videos without naration, but viewers prefer videos with naration. Could you please turn off or turn down the sound when watching the video and turn on the captions? Thank you very much for taking the time to watch the video on YouCanDo TV channel and leave comments.

@BradBo1140 10 ай бұрын

What the heck does their use of “heat pump” usage at the factory have anything to do with boring and hydraulic parts production.

@davehunk855 6 ай бұрын

😲

@phuturephunk 6 ай бұрын

Man, that is a LARGE piece of Inconel. That stuff is not cheap to produce, is very specialized and incredibly hard to machine.

@717pixels9 9 ай бұрын

Video feed is interesting but the voiceover with chatGPT-generated text narrated by robot does not add value to a video and in fact makes it much worse. Its just a bunch of buzzwords ("to ensure the smooth an safe opeartions the process must adhere to high standards of bla bla bla").

@technikwolle 8 ай бұрын

ich glaub für so ein lager muss man locker 100 000 moppen hinlegen

@diogo8500 7 ай бұрын

The real question is: What machine machined the machining machines?

@KendalMike 9 ай бұрын

Yet another channel using text to voice software. I clicked on 'Don't recommend channel'.

@andreasproteus1465 10 ай бұрын

Trepaning videos are stolen from David Wilks, without attribution. The others are probably stolen too. Only the BS is yours. I should report you but grassing on people is not my thing.

@kevind1865 10 ай бұрын

It's not even a real channel. Its just an algorithm stealing clips from videos containing keywords, and a computer narrating it. A computer channel, with botted likes, and botted comments just like 95% of the internet now.