YouLoop (Copy products) reception test [1]

[@JoanEA-SWL]

It seems it works quite fine. Take care of your health Mr. Tengu!

[@Ken.s_BCL-LogVideo]

Hello, my friend. The gain is not enough, so I will adjust it more. Thank you for your message.73's Ken

[@DXPedro]

Works nicely. congrats, tengu! 73s

[@Ken.s_BCL-LogVideo]

Hello, Mr. Pedro, my friend. Yes, it is interesting to try the new antenna. Thank you for your message.73's Ken

[@AaronHuber]

Impressive reception

[@Ken.s_BCL-LogVideo]

Hi, Many tnx for feedback.73's

[@marcosmza1962]

It seems to be more sensitive on lower bands even without amplifier. Very interesting 👍

[@Ken.s_BCL-LogVideo]

Hello. Yes, it is a cheap antenna, but the performance especially in the low band seems to be good. Thanks for the message.73s

[@zach0gr]

(1)I really wonder on how they didnt use just think wires to make the inversion. lower losses (2)even the use of a simple ring ferrite could do the work better for the T (3)as far as i read the original antenna has higher gain below 500kHz

[@choumm3226]

The antenna is 4 meters high, so it might not receive 'RFI' interference. and the singal is strong (59+20).

[@Ken.s_BCL-LogVideo]

Hello, yes, I'm sure it's in the countryside, so RFI is low, but I'm getting ADSL noise from a nearby phone line.Many tnx for feedback.73s

[@MrHajimeSaitou]

Interesting 🤔🧐🤔

[@Ken.s_BCL-LogVideo]

Hello, my friend. Yes, it is a very mysterious antenna. Thank you for watching.73s! Ken🌻😊

[@zach0gr]

Seems very clear antenna . Have you compared with another so far?

[@Ken.s_BCL-LogVideo]

Hello, Mr. Zach. Yes, the gain is about 40 db lower than the vertical antenna. I'll check it later. Thank you for your message.73s!! Ken

[@zach0gr]

@@Ken.s_BCL-LogVideo finally I bought the original and waiting also this.i think that the clone has a better box design than the original And of course rsp1a and Airspy D for reception The original is not so strong above 17 MHz

[@Ken.s_BCL-LogVideo]

@@zach0gr Hello. Thank you for the report. I would like to experiment someday.73s!

[@高根光男]

今晩は　弱い局（DX）も入っているようですね　ノイズの少ない環境でも変化をお感じになられたでしょうか　FBDX OM

[@Ken.s_BCL-LogVideo]

こんばんは。高さを2倍にすると少しは受信するようになりました。ゲインが低すぎなのかエアコンやPC、LED照明からの電磁ノイズは全く聞こえません。また、指向性のキレは結構良さそうです。さて、次はプリアンプのテストですね😊

[@高根光男]

@@Ken.s_BCL-LogVideo 高さの影響がかなりあるとのこと　了解です　できればこちらも高く設置したいです　アップありがとうございます

[@Ken.s_BCL-LogVideo]

@@高根光男 こんにちは。高いのは良いのですが電工パイプと水道パイプなのでやはりシナリます。ブースター取り付けるのは無理そうなのでやはり金属パイプが要りそうです😅

[@高根光男]

@@Ken.s_BCL-LogVideo 今日は　なんだかんだで出費が　 テレビ用の回転可能なステー金具と番線ではタメでしょうか?

[@Ken.s_BCL-LogVideo]

@@高根光男 そーですね。アンテナより固定材の方が高くつきそうですね😅 ブロック塀の向こうは歩道なのでステーが貼れません。結局軽量ステンレス パイプ1.85mを買ってきました。その先に電工パイプを繋ぐつもりです。で、よく考えたら同軸ケーブルが結構重いです。付属の細い同軸は使ってません。RG58A/U使ったのでアンテナより同軸が重いです（笑） 電工パイプの中に野菜用グラスファイバーを通そうかな🙂 今日は雨降りなので作業は明日以降ですね🙃