Your BMW Headlight Has A Brain. Let's Change That!

[@haleym16]

BMW can always update the headlights, but never the leaks. Lol Love the vids

[@shawzymusic]

Off the rip your production is so good now. Good job man

[@VehicularDIY]

Thanks!

[@bl300zxx]

lots of info for just a headlight...great job very informative and step by step instructions on how to do it right.

[@tsaopaulo]

Great video. Can you create a video how to use ISTA and INPA to code and clear error codes? Thank you!

[@autoauctionsreviews6358]

Great video Mousa, I changed that same module on my F10 535XI and it fixed the "adaptive headlight malfunction" immediately. It is annoying that I had to remove the bumper to do this easy job.

[@VehicularDIY]

Thanks, nice what year is your car?

[@autoauctionsreviews6358]

@@VehicularDIY It is 2011, with comfort seats. I like it so far.

[@ebayseller37922]

I removed the wheel and fender liner to install the module. It was difficult to remove the inner torx, but with some patience and a flex-socket, I finally removed it.

[@ebayseller37922]

Mousa, thank you for the tip. My f10 is pre LCI and using the cheap tms module from Amazon was a huge cost savings. I did have to initialize the new module and enable the adaptive function, but it all works great! Thanks for your help!

[@autoauctionsreviews6358]

@@ebayseller37922 Did you try to turn the wheel in and get access to the finder liners openings? I think the finder liner has (gates) that when you unclip them you get access to the headlight from the rear.

[@frankdogg75]

Finally a face to the voice! Nice to meet you! Great videos! Your channels epic bro! Been a fan for years!

[@sollykhan2385]

Thank you for posting this video, it certainly shed a bit of 'Light' on this topic, and were now a bit more 'enlightened ' as a result 🙂, please post more video's, Bless 😇

[@EXACTLYInstrumentals]

Would not have guessed you look like that after watching your voiceovers for years

[@jamesmotoring5663]

I guessed he is finally comfy enough to face the camera. Regardless, I think his video editing is always very good

[@VehicularDIY]

In the past I was doing it mostly to help people, now I'm doing the same but also hoping to use the videos to start a dealership.

[@saf6996]

@@VehicularDIY best of luck!

[@yusifamda]

hey bro, can you do a video on how to clear an airbag light on the f10?

[@Lawnvolution]

Another fantastic video!

[@markronie6484]

Glad we finally get to see you

[@Nico_335i_DCT]

Great fix Musa. Thanks for sharing. Dutch regards, Nico. (Btw, again problems with the 335i. 3 of the remanufactured index 9 injectors are leaking overnight. Now I want the new index 12 ones from the dealership. But I can get only 1 per client. They have 1500 in backorder. 😞 So I have to wait for a while.)

[@shanemiller9191]

I love your videos. Start to the point and informative. Any chance you have a recent video on Inst+. I can not seem to get in installed and if it is I'm not downing something right. I need help on installing and using Ista+. Any info would be great. Thanks

[@MarioDallaRiva]

What?! Whatever happened to your wife’s nightstand worktop? 😎 That was a signature piece of kit. Well done 🤙🏼 how’s life in CA vs TX?

[@VehicularDIY]

I'm really enjoying it so far. Lol yeah that thing was great.

[@joeyDrivez]

How can I download ISTA? Could you make a video or something on how to obtain it with the links and stuff?

[@mrexecutive1]

Hi, wheres the best place/price to get ista? Thanks!

[@moma9815]

Simple and to the point , great channel . What about a video about software that you use, ISTA..etc Been trying to get ISTA anyone knows a good torrent or download link ?

[@VehicularDIY]

Best bet is to check forums like bimmer scene etc.

[@profuse007]

Is ISTA+ a BMW OEM diagnostic tool?

[@JQ_Unity]

If you don't have protool, you should get it. I don't know about the newer f series stuff but I can do all coding on the e gen cars and early f gens in the palm of my hand. VO code, add and remove features, change settings, vin pushing, etc. All easy to use (at least for me)

[@jbatacan2]

Is protool easier to install then the other coding options? i need to code in a new head unit on my e60, and id love to be able to do it myself.

[@albertobeltran8960]

I came across this problem just yesterday no signal and headlights on driver side

[@yusufyildirim1435]

Hi, I really like your videos I hope you continue to grow on youtube. I have a question how can I get the latest ista for myself (i have ista + 4.32.15 with 2019 base)

[@VehicularDIY]

Best bet is to search forums on the internet such as bimmer scene etc.

[@azcarpetco3461]

Do you by chance have a video on how to set up ista? Thx you

[@northsidesnkrs5205]

Ok just making sure, I can replace the module and it should fix my turn signal and halo lights without programming but it will have codes? Or does it need programmed for the turn signal to work?

[@eddieedwards8267]

I need your advice on something

[@ONAJEL]

Hello, I have problems with the adaptive lighting system on a 2011 535i, I changed the module and also the xenon bulb and it continues without turning on the high and low beams, this only happens on left head light

[@Chunkiemerk]

I found a oem one for the same price on eBay

[@Chunkiemerk]

So I hope it works and no coding

[@brunonaranjo6985]

@@Chunkiemerkdid it work??

[@dfqnexxus3710]

I replaced my modules on my e88 135i after fixing all the wiring and still I can't make it work , I tired with protools but didn't work not sure what exactly it's going on . I will need to get a laptop and learn more about insta to figure this out

[@VehicularDIY]

Yeah I have three laptops for this lol.

[@gixxerex8683]

I have the same problem, I went n got the module n it didn’t work, I went n got the ista program but don’t know how to actually use it, n my code came back to, control until is not encoded for the vehicle & LEDs not taught in????

[@SkySemijon]

Hi, thank you for the great video it’s well explained. I bought a Umnitza Retrofit Led Headlight for bmw f10 2011-2013 models which is a plug and play and when i installed the driver side headlight everything was working but the passenger side headlight only the DRL angel eyes and signal lights wasn’t working. I brought to a dude that said it could be the headlight or the Module the problem but he managed to make the signal lights working but he turned off the DRL both sides so it doesn’t look weird when the lights are on. Now i just ordered the same TSW module as you mentioned on Amazon and everything looks like is working but the angel eyes (DRL) are still not working. Im not able to have find the dude who coded my car before to turned off the DRL. What do you recommend me to do to have my DRL working? I have no idea how he turned it off and it looks like i have to turned it on manually with some programs ? I tried bimmercode and Autel Maxysys and not able to have the DRL activated. Pls get back to me if you can help. Thank you

[@sunnytab6234]

I changed my headlight now my rear turn signal doesn’t work tried everything shows a ground checked everywhere can’t find it

[@bgubs07]

Any tips on fixing an issue with the drivers side adaptive lights not angling when turning left (turning right works just fine)? e9x LCI

[@xantor_]

I wonder the same. E93 lci here

[@alw757]

This is by design to prevent blinding oncoming drivers. Lights should angle when traveling at higher speeds, but not when stationary (ie. when waiting at a left turn signal light)

[@xantor_]

@@alw757 if that's the case I am glad lmao. So when turning right it does indeed angle the light right but not when turning left

[@VehicularDIY]

Yeah I think that might be normal operation.

[@igotaction]

Check the left front wheel trailing control arm for the level sensor make sure its not twisted or the bracket is broken or not clamped all the way

[@worldtraveler7035]

Is it possible to replace the LED left turn indicator (which is part of the headlight assembly) in 528xi 2012? It is not a single bulb from what I understand. I thought it was an LED assembly.

[@h.s.m1211]

You’re a genius man

[@maverickelbow50]

What would you change for the dipped beam failure?

[@bonkers33331]

Question: My (2nd) replacement module in the same side does not indicate it needs initialization, how can I initialize it? If I swap the driver (2nd aftermarket module) with passenger (OEM module) will they both show up as different and need initialization? I purchased a replacement module, sealed the light module, installed and initialized. Everything was working great. My seal work was not good and apparently the replacement module not as robust as OEM. It failed causing my halo lights to not work. So I purchased again, installed and thoroughly sealed. Halos work, but adaptive headlight failure appears. I attempt to initialize with ISTA, but it does not appear as a problem. Most likely the module has the same programming (SN, etc.) as the original replacement and ISTA thinks everything is okay.

[@matthewbrown2479]

can u show u how to install ista and inpa

[@save2rave61]

So if I have the xenon it’s lci?? Have burnt pins on board and slot. No drl no high beams

[@chadriddle3517]

Great video! I have a question how do you obtain Ista+ ? Is there a specific budget route you would recommend. Thanks

[@gdcl1980]

Hi, I bought the ista+ on ebay, the cost was $100 I bought the cable on Amazon because I did. It seemed qie was of better quality and the cost cue of $ 25 if you want the links leave me a message here to share them

[@chadriddle3517]

@@gdcl1980 Appreciate the reply and advice yes send the links if you don’t mind is it troublesome to install my laptop does not have a CD Driver . Can you do it via flash drive ?

[@roderickwigginsjr1236]

@@gdcl1980could you send me the links also?

[@RollingInBoost]

do you have to buy ista? can it work with the inpa cable

[@Duckspuddle]

can anyone tell me what type of "cable" I need to do above. as in what do I use to connect the laptop to a car??

[@weasel1991q]

How you call the part where you insert module? Because one of my contacts burn and just wondering or ita possible to fix it or replace it

[@exrae1992]

what if i change headlights with aftermarket ones would it still give me malfunction?

[@streetz-runner1683]

hey! i have a f30 lci 2018 with non working led angle eyes on the drivers side only and getting message in the idrive that the light ride adjuster doesnt work because a hade a crack on the headlights and than water came inside the lights, do you know wich modul controlls the lights ride hight adjuster? does the message lights ride hight fail come up because of the angle eyes dont work i mean its take some seconds than it goes up and down, so can it be the module for the angle eyes that is doing that problem with the lights adjuster?

[@mikimiki195]

Am I g video thanks for showing how to get it initialized with ista

[@wilfred3428]

For an E90 2006 with new LEDs lights, Do you recommend use CARLY? or something easier for someone who does not know much code? I get the same Adaptive Headlight error... Please some help?

[@claudioagmfilho]

🇧🇷🇧🇷🇧🇷🇧🇷👏🏻, Awesome vídeo, as usual! Great procedures, thank you so much for the great tips…

[@cyrusgill1594]

Ista e-sys where do I get these programs from ?

[@797161002]

Is there anyway to get ahold of you directly? I can't find a way to dm you

[@mjehamy0128]

Hey man recently had my 21 m340i repaired by a collision shop. Passenger side fender was hit and replaced with new. Any idea on hood alignment points and fender align points. Tried adjusting lower hood area and success however as you follow body lines up the fender is higher than hood.

[@GamerX0786]

Wonder if someone can help, I have a new module for the f10 and installed and also was successful to teach and and initialise the module. Everything worked at this point. Until I rescan for codes and it comes up with module not coded to this car and halos stop working and get the error for side light and adaptive headlight failure, Any help would be appreciated

[@intick13intick44]

Hi Musa , good job as always 😉 Sorry to be out of the video topic but I've got question about E9x steering Wheel/ direction feeling I've seen this problem on many BMW of these generation, the streering wheel is not really accurate, you spent most of your time correcting the car direction, this is really annoying. There's any mechanical issues, all arms, suspensions, geometric adjustment done and everything is brand new but the car is like searching its way all the time Different version of E9x had this issu, with different wheel size and different tires. This makes feeling insucure on the road especially on the highway at higher speed . Wanted to know if you have any further information about this behavior? Even some old E39/E38 had this weird problem..

[@vibingwithskeet]

Anyone here gotta 2014 or newer with headlight condensation? What did yall do?

[@StasysFPV]

Hi. If the module is not original, does it work properly? Because one module is not original and in the evening the beam of that lamp runs in different directions.

[@Mill3r9]

What software is that you’re using to run codes?

[@zaroaster8348]

What is pre LCI ?

[@TheRealDjSilk]

Hey bro , I'm having a issue with my tail lights where they blink or flash by themselves at will when my brake pedal is not pressed in. It stops when I depress lights. Can you help??

[@tamijohnson4610]

PLEASE HELP! 🙏🏼🙏🏼🙏🏼 I’m struggling now for about 3 months trying to get my headlight fixed. I got a car wash and condensation got into my passenger side headlight it stayed like that for about two weeks and then my angel eyes went out and I’m having the daytime running light malfunction we took it apart and saw that the control module had some corrosion as well as the inside port where the control module plugs in had a little bit of corrosion. I purchased a brand new adaptive headlight for that side put all of my parts in with a new control module and still nothing happens not even my regular headlights work now with the new headlight. Do you have any suggestions?

[@ElrudyCora-ms5dw]

The wireing

[@MBZXZ]

or programming

[@stephenkocynski7911]

I installed an aftermarket TMS module that fixed fhe angel eyes, and signals, but low and high beam lights, adaptive function don't work. I took my car to my dealer to have it programmed, but I was told that they could not program the TMS modules. Any suggestions?

[@00000005547]

Did you change both? When I was programming mine it wouldn't program and gave error if I had one original and one aftermarket. If you have 1 original 1 aftermarket, chances are that's your problem.

[@JimmyDBlock]

I tried this and it said it’s from another vehicle, and it’s not genuine😢

[@Wildc4rd]

For me the aftermarket TMS module did throw in adaptive headlights error but error goes away after a while, but what I noticed angel is with this aftermarket TMS is noticeably dimmer that my OEM. Almost hard to see it in day time. Do you think I need coding to correct that issue or did I got a defective TMS module?

[@tammywilson675]

Are your lights xenon?

[@DatM135i]

Which version of ista are you using, I’ve tried this on two different versions ista and it just skips encoding or what not, it looks like it did but it skips a few steps like shown in yours, so I was just wondering which version are you using

[@yousifhashem4672]

Hey is the ISTA+ program free? and what cable do you use to connect to the car?

[@redsbluesdontwalkinmyshoes7604]

Can you describe Pre LCI?

[@JimmyDBlock]

after 2013 the headlights changed

[@chialor1945]

*Hey mate, been watching you forever and a day now lol* I know you told me once you live in the same city as me, I'm actually on the same side of the city as you from what I recall you telling me. My bluetooth seems to be stuck in "limbo". My phone connects to my car, but because my car's bluetooth is stuck in limbo. It doesn't play anything. I'm actually quite confused because I tried taking the main battery off for hours and it just doesn't reset. I looked at the fuses and what not, checked the bluetooth in the back trunk. I just can't restart the iDrive. I was wondering if you have any ideas on how to reset the iDrive? My iDrive has the latest firmware update, but the bluetooth is just stuck in limbo. Any help would be great. If not, I was wondering if we can meet up and see if you can try to debug and fix the issues. I have a 2014 435iX.

[@VehicularDIY]

I moved across country actually, I'm out in San Diego. Thanks for watching all this time.

[@Paris.Kalachnikov]

Average owners do not possess your skills to perform this kind of work which make these repairs impracticable.

[@chrisrobles2012]

Maybe at first but the forums have taught most novices how to do it. KZbin is def better at showing the visual of how to. I’d say he could make average owners not so average 😆

[@VehicularDIY]

I'd also say the average viewer is the type to tackle most projects and are above average intelligence :)

[@ImStep-by-Step]

Some do!

[@jz497]

When did he reveal his face?!

[@2rwoodham]

thats cool and all if your going to buy us the programs you use....

[@juancarlosathome101]

Hey Musa, it's me again! 😁 Once again, a video showing a procedure that us Bimmer common-folk would have never thought of! I promise you I'm not a scammer, and I apologize if my enthusiasm surrounding the destination of your recent move may have possibly depicted me as such. I'm honestly still just trying to reach out to you via a more private method of contact, i.e. email, to see if it could be possible to meet up and go over some details there... Not trying to fan-nerd out on you here! 😅 But yeah, you responded to a previous comment of mine stating that your email address was on your YT channel's "About" page... Not sure if maybe the fact that I'm on a mobile device may be the culprit, but I can't seem to find your email address sir! Trying to tactfully request it from you, I suppose, but I feel I may be failing in my... tact... 😂 Anyways Musa, as always, thank you for your time, expertise, and everything you do... Here's hoping all this can work out! 🤞🏻😊

[@n55tourist32]

it's there, you have to click a button to show it.

[@VehicularDIY]

Hey it's all good, I responded to your comment on my last video with that info.

[@juancarlosathome101]

@@VehicularDIY Thank you my good sir! I'll try getting to it from a PC... Maybe that will do the trick! 😊 Thanks again Musa!

[@bugsy791]

0 fault code on an F10...dont think ive ever seen that

[@mosesmanaka8109]

You forgot to fill up the Blinker Fluid. Just ask your wife to go buy some.

[@wichovr6]

So much bs just to get a headlight to function properly.