Replace ALL YOUR REMOTES with the Sofabaton X1S! Step-by-Step Guide

Replace ALL YOUR REMOTES with the Sofabaton X1S! Step-by-Step Guide
Buy the Sofabaton X1S - amzn.to/3U1TbPq
Receive 15% off when you use promo code Youthman during checkout.
This video is sponsored by Arendal Sound - bit.ly/Arendal_Sound
Join Us for MWAVE 2024 (June 21-23, 2024) - midwestavexperience.com/
Platinum Channel Sponsor: Arendal Sound - bit.ly/Arendal_Sound
Subwoofers - bit.ly/Arendal_Subwoofers
1723 Speakers - bit.ly/Arendal_1723_Series
1723 THX Monitor - bit.ly/Arendal_1723_Monitor
1723 Subwoofer 2V - bit.ly/1723_Subwoofer_2V
1723 Subwoofer 1S - bit.ly/1723_Subwoofer_1S
Use the affiliate links below and help support the channel with no cost to you.
TV's (98" and larger) - shop.howl.me/youthman/collections/5383
Audio Advice - bit.ly/Audio_Advice
Best Buy - howl.me/clwC9rCV7qx
Amazon - www.amazon.com/shop/youthman
-----------
Timestamps:
00:00 - Intro
01:15 - What's in the box
01:47 - Installing the Hub
03:28 - App Setup
05:37 - Adding Devices
07:43 - Setting Up AppleTV
08:39 - Adjusting Power Settings
12:55 - Source Configuration
17:31 - Creating Activities
20:40 - Adding Activities
26:20 - Sharing Remote Codes
27:40 - Updating Firmware
28:36 - Learning Remotes
30:50 - Repairing Commands
31:42 - Create Custom Buttons
32:50 - Create Favorite Keys
35:01 - Using the Remote
-----------
The AV Experience Podcast:
KZbin - bit.ly/The_AV_Experience_Podcast_KZbin
Spotify - bit.ly/The_AV_Experience_Podcast_Spotify
Apple - bit.ly/The_AV_Experience_Podcast_Apple
Upgrade Your Home Theater - bit.ly/MWAVE_Sales
Weekly and monthly Zooms on Patreon - www.patreon.com/youthman
The AV Experience Podcast - bit.ly/The_AV_Experience_Podcast
MWAVE 2023 Tickets and Info - midwestavexperience.com/
FREE Home Theater Design Tool - bit.ly/Home-Theater-Design-Tool
Recommended Home Theater Gear - www.amazon.com/shop/youthman
Submit your Home Theater - hometheatertours.com.
Ways You Can Support:
Patreon: www.patreon.com/youthman
Youthman Courses - www.youthmancourses.com/
Youthman Merch - teespring.com/stores/youthman/
Donation via Venmo @Youthman
____
Disclosure: Affiliate Links are used in the description of this video. I earn from qualifying purchases.
Valencia Bespoke Series Theater Seats:
Monza Carbon Fiber (NEW) - bit.ly/Valencia_Monza
Tuscany Ultimate Luxury - bit.ly/valencia-tuscany-ultimate-luxury
Oslo Ultimate Luxury - bit.ly/valencia-oslo-ultimate-luxury
Naples - bit.ly/Valencia_Naples
Valencia Cinema Series Theater Seats:
Venice - bit.ly/valencia_venice
Budapest - bit.ly/valencia_budapest
Piacenza - bit.ly/valencia_piacenza
Piacenza Powered Headrest - bit.ly/valencia_piacenza_powered_headrest
Verona - bit.ly/valencia_verona
Verona - Powered Headrest - bit.ly/valencia_verona
Valencia Premier Series Theater Seats:
Oslo - bit.ly/valenciaoslo
Oslo XL - bit.ly/valenciaosloxl
Zurich - bit.ly/valenciazurich
Tuscany - bit.ly/valencia_tuscany
Bern - bit.ly/valencia_bern
All Valencia Seating - bit.ly/valencia_all

[@Youthman]

Replace ALL YOUR REMOTES with the Sofabaton X1S! Step-by-Step Guide Buy the Sofabaton X1S - amzn.to/3U1TbPq Receive 15% off when you use promo code Youthman during checkout. This video is sponsored by Arendal Sound - bit.ly/Arendal_Sound Join Us for MWAVE 2024 (June 21-23, 2024) - midwestavexperience.com/ Platinum Channel Sponsor: Arendal Sound - bit.ly/Arendal_Sound Subwoofers - bit.ly/Arendal_Subwoofers 1723 Speakers - bit.ly/Arendal_1723_Series 1723 THX Monitor - bit.ly/Arendal_1723_Monitor 1723 Subwoofer 2V - bit.ly/1723_Subwoofer_2V 1723 Subwoofer 1S - bit.ly/1723_Subwoofer_1S Use the affiliate links below and help support the channel with no cost to you. TV's (98" and larger) - shop.howl.me/youthman/collections/5383 Audio Advice - bit.ly/Audio_Advice Best Buy - howl.me/clwC9rCV7qx Amazon - www.amazon.com/shop/youthman ----------- Timestamps: 00:00 - Intro 01:15 - What's in the box 01:47 - Installing the Hub 03:28 - App Setup 05:37 - Adding Devices 07:42 - Setting Up AppleTV 08:39 - Adjusting Power Settings 12:55 - Source Configuration 17:31 - Creating Activities 20:40 - Adding Activities 26:20 - Sharing Remote Codes 27:40 - Updating Firmware 28:36 - Learning Remotes 35:50 - Repairing Commands 31:42 - Create Custom Buttons 32:50 - Create Favorite Keys 35:00 - Using the Remote

[@budala1969]

Awesome tutorial Michael. Have you tried the Alexa integration?

[@Nein1one]

This stacks with the current 10% off coupon!

[@Rayman-expertsoundpro]

Does this work with Amazon Alexa?

[@Rayman-expertsoundpro]

Ignore, see that it does

[@Youthman]

Awesome! I’m glad you guys are getting a Youthman deal! I have not tested Alexa

[@stevethomas3502]

I just purchased the X1S after my Harmony Elite packed it in. I’m very impressed - it was much easier to set up than any of the Harmony remotes I’ve owned over the years, and is faster too. The beep feature to find misplaced remotes is genius. I’m surprised others have returned theirs.

[@SummitCenima]

Youthman Thank you so much for informative tutorial and review ❤

[@rickmart61]

I tried the X1S and after a couple of frustrating weeks I returned it and bought a used Harmony Elite and have been very pleased.

[@Youthman]

Thanks, Rick. What did you find that was frustrating?

[@dickdastardly4801]

I did the same, I went back to my Harmony. I will use Harmony until Logitech stop maintaining the server.

[@voiceofreason9238]

I have a Harmony remote and like me, it's getting older. What did you not like about the X1S? I'd like to get one for Vizio TV, BD, cable but no set top box, and internet ie KZbin., Denon 6700 AVR. No gaming devices.

[@toddregister6621]

@@voiceofreason9238 Are the Harmony configuration websites still in use/accessible?

[@sjsphotog]

@@toddregister6621 Yes for now but anyones guess as to how long they will be supported. Real issue with the Harmony was the batteries fitzing out on the crappy designed cradle dock that never seated properly at least on mine

[@O23pSt]

Thank you for your in-depth video ~ I watched many videos on the sofabaton x1s but this is the first video that answered so many of my questions

[@Youthman]

Glad the video was helpful.

[@JD_Viddy]

I went ahead and ordered one (the discount helped!) since I'm worried about my 16 year old MX-500 universal remote completely dying. I certainly got my moneys worth even though the LCD backlight hasn't worked in at least 14 years, and I have to put in 4 new AAA cells every couple of months.

[@Youthman]

Cool let me know how you like it

[@keepingupwiththejones2933]

Another outstanding review by the Youthman ❤

[@Youthman]

Thanks, Tristan I hope you and your family are doing well, brother

[@Carl-iw9sy]

Just ordered me one using your link and discount code. Thanks Mike!

[@rbiamby]

Michael love your product review videos that are so informative and therapeutic at the same time, thank you so much.😊

[@Youthman]

Wow Randy. Thank you for the kind words. I’m curious what you mean by therapeutic. I’ve never heard that before. 👍

[@rbiamby]

@@Youthman It is so soothing and relax watching the video like the peace of God is all over you and you convey that peace to others.

[@Youthman]

Man I really appreciate you sharing that.

[@rbiamby]

@@Youthman it's the truth😊

[@davejones1959]

Great review, informative, detailed and easy to understand, if familiar with programing Universal remotes. Not so much if a newbie.

[@deegates6506]

I just wanted to say that I'm so happy with the tutorial. I can't tell you how long I have struggled with this remote. I'm going to take your input and work on my configurations. I have the X1. Now I plan to get another one for my home theater. Finally one remote again.

[@Youthman]

Thank you kindly. I reviewed the X1 and I too had a lot of issues with it. The only issue I had with the X1S was configuring the inputs but that was partially my error. once I used their default recommendation and used the AVM70 code instead of the user uploaded AVM70 8K codes, that worked like a champ!

[@chuckcurrier1686]

I had the X1 and did purchase the X1S a month ago and it’s working well for me. Once you get by the learning curve, programming my new remote was quite easy.

[@Youthman]

Happy to hear it’s working well for your setup.

[@chuckcurrier1686]

I always appreciate your reviews!

[@Youthman]

@chuckcurrier1686 thank you kindly

[@rcdude86]

Thanks for the informative video and outlook on a universal remote for us diy guys!!!! Will be giving it a order and a go!

[@Youthman]

Glad you found the video helpful. Let me know how you like it.

[@rcdude86]

@@Youthman will do guy!

[@VoodooZ]

Great review. I bought a Skip 1s configurable remote which is cheaper but doesn't have bluetooth. but for me IR only (plus HDMI-CEC relaying) it's fine so far.

[@dwayneharris1438]

Thanks for the review. I like the way you explain in detail how the X1S function. It do remind me of the Harmony, but with a better lay on the app. I do have the U1 had a difficult setting the U1 up I believe I will give the X1S a try.

[@Youthman]

Thanks Dwayne. Let me know how you like it.

[@davidg8032]

Your videos are great. You do a nice job explaining things...

[@we8463]

My Harmony Elite battery finally died after seven years of loyal service! I tried replacing the battery with one I bought on eBay but it did work out! Glad I still have the Harmony app on my iPhone! Works great :)

[@Youthman]

I bought a replacement battery on Amazon. kzbin.info/www/bejne/b4SwqHSqi9WDZtEsi=eN9qc8gwAARuD1PY Looks like it’s no longer available on Amazon.

[@moamenhelmy9510]

great informative video thanks for your efforts

[@chrisl9813]

When I replaced my Harmony last year with a Sofabaton I'd decided on the U2 over the original X1. A video comparing the X1S improvements over either X1/U2 would be appreciated.

[@edwarddesbois7076]

Just to let you know... due to the video I got one immediately. Thanks for this and using the code I hope you get the commission.

[@oliver2833]

Great video ... very well done ... I have ordered one to use with my devices ... I have a Zidoo Z10 Pro, Apple TV 4K, Nakamichi 3000 11.2.4 soundbar & a Hisense U8 4K TV ... I hope I am able to convert everything ... is it possible for you to maybe do something in the way of a video for the soundbar and the Hisense TV

[@KarthikSktk]

Appreciate the video explaining things in detail. Can you please do one for stereo setup as well? The DACs and sources are of bigger variety and seems like the X1S needs to manually learn cmds from them all

[@holgerschever6321]

Hi Michael, thanks a lot for the Video. I am using the Harmony Elite for years now and happy to see, that another product seems to be so close now... I think the missing step is the remote. A Touchscreen is mandatory and it needs a few more buttons... Seems a realistic perspective 😁

[@Youthman]

I wouldn't be surprised if we see a touch screen sometime in the future. I think they are off to a good start.

[@CrispyJohnsonYT]

Hey youthman, do you know if it's possible to use this remote to control a ps5 for media playing purposes? (eg 4k blu ray or KZbin app control). Thanks!

[@philnicol8072]

Michael. I have a Panasonic DP-UB9000 4K spinner. Can this SofabatonX1S remote - adopt most of the button executions from the UB9000 remote. ? And also most of the button executions from my Epson projector remote. ? Reason I'm asking is. I'm always fiddling with the UB9000 remote, to get the best overall picture quality for nearly each individual movie.

[@boedilllard5952]

Still rocking my Harmony One - I bought about 5 of them as nearly new or new on ebay for a bargain. I still have two of them still in the box.

[@juleocan]

Good job Michael....your instructions are very detailed and clear...now I think I will invest in one of these...✌

[@Youthman]

Thank you for the kind words. This took me 4 days to film and edit but I wanted it to be as comprehensive and easy to follow as possible.

[@sjsphotog]

Dont be so sure, My experience has been very bad on day 1 and Im an engineer/techie

[@Youthman]

Did you reach out to their tech support via the app?

[@sjsphotog]

​​@@YouthmanI will be contacting them because none of my activities work even though the devices work

[@FadriqueFM]

Great video. I think I’ll pull the trigger on this one.

[@Youthman]

Let me know what you think.

[@garryhammond3117]

This looks like a truly worthy "all-in-one" remote! - Thanks fror your awesome review Michael! - Cheers!

[@Youthman]

I agree. Glad you enjoyed it

[@airman6822]

Michael, thanks for the review. I have been using the CEC function for years but it is limited. I was all excited watching your review until I saw the 85U7H remote could not be learned (that's what I have). Is that not compatible with the X1S? Also, I have my components in another room, how does that work, I must have missed something.

[@Nosjamesmenzer]

I just wanted to say I'm impressed with the remote. BUT its missing q few things that is stopping me from getting it It needs to be able to integrate in eith home assistant so i can use it just like i have done with my harmony remote

[@oli61]

At least it offers an "API" option in the app, which gives URLs for switching on and off every activity. I use that in an Apple short-cut, activated via voice.

[@matthewschur3698]

Youthman. Great video. Do you happen to know if this remote will work with DirecTV's remote for their Gemini Air dongle? The DirecTV "Universal Remote" that comes with the dongle only allows for the control of volume for either your TV or sound source. No power on or off (let alone any other settings & features). Thank you so much in advance! M

[@bernardgigot4177]

Hello, can you tell me if it's possible to use with Emotiva RMC 1 ? Thanks in advance for answering

[@tabularasa820]

Really great run through. Thanks for the thorough set up explanation. This helps knowing there are other solutions other than the defunct harmony or paying for a 3rd party control 4 system.

[@Youthman]

Thank you kindly. I’m glad you found the video helpful.

[@jwillard911]

Cool remote looks like something I may need to upgrade too, but when is the full update of the Anthem? Thx!

[@kman7222]

nice that they listened to you and implemented them and other fixes. excellent tutorial Youthman. looking forward to the full review.

[@Youthman]

Thank you Kman.

[@racecrashrepeat]

If you look at the actual firmware updates. 1st update states Hub firmware and the 2nd update said hub REMOTE firmware update. Different devices

[@sjsphotog]

Wow really impressed here. I've been holding off on what to do to update my DEAD Logitech universal remote. The top 2 options weren't that great and had many issues. This looks like it might Finally Be the one to take over. Crossing fingers. Great top notch detailed walk thru tutorial Youthman !! Keep up the good work

[@Youthman]

I’m glad you found the video helpful

[@sjsphotog]

Before you jump for excitement wait till you actually try it. My experience has not been favorable so far. :(

[@jamesmickey2376]

Just got my Sofabaton X1S! MAN your video tutorial was amazingly Awesome! HEAD and SHOULDERS better than all the others out there on YT! So, I appreciate your time and definite efforts! I too have the Anthem AVM 70 (non 8K) but having difficulties getting the inputs right especially for my Sony 4K projector! Was there any extra footage of you wrestling the AVM-70 inputs in the Sofabaton app? Any help would be greatly appreciated.

[@gosman949]

How do you input numbers for the old fashion tv channels? Also, I see a problem having to charge both the hub and the remote. How long do they hold a charge?

[@STREAM_BOXER]

Great video! Just bought one and you cleared up a couple of issues I was having.

[@Youthman]

Awesome! Glad you found it helpful

[@STREAM_BOXER]

@@Youthman Ran into a new snag! had to swap out cable boxes. I had the Altice One box and it worked fine. I swapped it out for the Altice mini and can't pair it. Sofabaton won't even learn from the remote. Weird because they are identical. As a last resort, I'm going to do a factory reset. If that doesn't work I have to return the Sofabaton. I'm not happy.

[@Youthman]

I’m sorry to hear you are not able to get your cable box to work. I would recommend reaching out to their support within the app. It’s under the Me tab.

[@STREAM_BOXER]

Found out the problem. I needed to unpair the actual remote. It puts the cable box in BTmode. You have to unpair and put the box in IR mode.

[@Youthman]

Ah! Glad you figured it out. Thx for the update.

[@pjdava]

Youthman, Subscribed because your videos are so much fun!

[@Youthman]

Thank you kindly

[@exiledeternity7852]

Oh i remember providing support for the Philips Pronto. Fun Times.

[@tahirhameed-mth1530]

I can see Logitech Harmony Elite there how you compare with that as I am using the same and very much pleased.

[@FarawayPictures]

Interesting review. I'm umming and ahhing over this or whether to buy a cheap laptop to configure my Phillips Probto Pro.

[@TheLkdude]

Nice! very useful tips! Good to know Sofabaton is to the mark! Great video Michael!

[@Youthman]

Thank you kindly

[@user-sk4gj3ji3o]

One of biggest issue most of the manufacturer they overlook or ignore is remote. By providing high quality remote control the navigation becomes easy and overall user experience and if its univasal one its a grate value addition. Since no one prefer to use mobile as a remote control.

[@stevenszebenyi2446]

Great review and set up guide. Thank you. How long an IR blaster cable did you need to reach your NZ8? My NZ7 is about 13 feet from the screen and I would require a 20 foot blaster to reach it through the ceiling.

[@stephenphillips1660]

My 2011 Logitech Harmony One still works great. It has a touch screen and charging dock, but no RF or Bluetooth.

[@getinyepigs]

Still using my Harmony Ultimate. Two things it does that the X1 needs to have: 1: Touch screen. 2: Favorite channel icons. That second one is the killer. Also, voice command pass through for services like FIOS and Apple TV would be good. Alexa and Google integration is nice but that doesn’t help with vendor specific voice commands.

[@donforman4326]

Why did you change Apple TV to bluetooth? Will you be using the X1S in stead of your old remote?

[@scottskidmore8424]

I have a Savant Savant Jet Black Pro Remote X2 and am looking for a better remote. Any suggestions?

[@user-see-s6o]

Did you try to f8nd the device entering the remote code? For me, it couldn't find my samsung tv, then I used samsung TVs remote control code, it added without issue. Support is super good. They added my TV within 24hrs after I reported.

[@mustangfred2006]

Really nice tuturial. I love that it accepts blu-tooth devices. Really wish it was a touch screen though. That could make it perfect.

[@Youthman]

I would be surprised if sometime down the road they add that. Seems like they are just getting started but I like where they are headed.

[@sjsphotog]

so far my experience with bluetooth devices (my NVIDIA shield) have failed

[@davidg8032]

What is the screen I'm seeing on the X1S? Just a display screen?

[@Youthman]

The screen is shown in the video. It’s not a touch screen.

[@SethBrandes]

Thanks for this informative video. How do you control device specific functions? E.g. changing music formats on a Denon AVR? Or switching user settings on a Sony PJ?

[@JD_Viddy]

Once I had activities setup for each one I used the two bottom right buttons (Green and Blue) and mapped them to my LX305's Auto/Direct and Surround buttons to allowing changing audio formats. There are some more rare AVR functions but for now I just use the AVR remote for those.

[@TheBuckeye36]

My devices and the hub are in a closet and everything works without the IR blasters so far. However, my projector is none responsive since it’s outside in the theatre room; how do you get it to work other than dragging a long IR blaster through the door. Is there any clean wireless way?

[@DJSYSCheck]

As Logitech does not have a solution for the new(ish) Dutch Ziggo Next Mini cable box, I wonder if this will be a solution. The Ziggo Next Mini box uses a radio signal, which makes current Logitech (Elite) remotes useless. The only solution is NOT use a universal remote, but use CEC solutions with the Ziggo remote. Any ideas?

[@jamesjeffley4926]

Thanks for the great review and tutorial!

[@erhman2004]

Could this be what I can replace my 15-year-old Logitech Harmony One? Maybe. I will have to check it out!

[@ChrisHVACguy]

Makes me a proud AVM70 owner to see 2 big channel users I watch rocking it.

[@Youthman]

I wouldn’t say I’m rocking it. Audio Advice lent it to me to review. I rock the Marantz AV7706 which has performed flawlessly without any hiccups. I’ve had several hiccups with the AVM70, most are HDMI handshake issues.

[@ChrisHVACguy]

@@Youthman interesting, I haven't had any issues except hand shakes with my Chromecast with Google TV, but that thing has always been glitchy.

[@curt248]

@@Youthman I use a 7706 like you, interestingly enough I run 3 Lascala’s like you used to use for lcr. I have heard so much good reviews of the avm70. Have you noticed a sound quality improvement or difference in any way on the sound quality front compared to the 7706?

[@pgjscottie]

Hi would you recommend the Sofabaton X1S over the yio remote 2

[@Saturn2888]

You're right, this looks legit now. Not like the old version! I'm honestly surprised.

[@Youthman]

I was too! That’s why it sat on my desk for a month before I opened it up to review it lol

[@petermerendino516]

Spent the past two days with a tech (from Japan very poor connection on phone) We tried and failed to connect and the culprit cont. to be input issues. It is going back and I will cont. to use my sevenhugs remote that is sadlly discontinued

[@davejones1959]

Promo code not working for me. What am I doing wrong? Youthman in promo box at check out? Correct?

[@mfkhometheater7742]

Great video! I have two of the Harmony remotes and honestly, I’m not very impressed with them. To me, they are not as easy to use as my old URC MX450 I had back around 2010. One of the issues I have with the Harmony is that I cannot set the volume to always address the Marantz AV10 regardless of which device is selected. If I create an activity, I can do this but I’m old school and resisting the activity approach. Can the Sofabatan do this? You did a great job explaining how to setup the Sofabatan and how to use the activities so maybe I just need to stop resisting this approach and go with it either with my existing Harmony’s or get the Sofabatan. Ultimately, I would like to control everything with Home Assistant using a tablet. The top page of the dashboard would have all the basic regularly used commands for each device so I don’t have to constantly switch between devices like I do now with the Harmony. The problem is compounded by an issue with the AV10 on screen volume display. It only offers very top, or very bottom of the screen and because I use an anamorphic lens, the volume display is always off the screen. (Maybe I need a MadVR) If I want to change volume, other than doing it blind, I have to do the following sequence… 1. Select player, select pause. 2. Select JVC NZ8, change anamorphic stretch. 3. Select AV10, change volume. 4. Select JVC NZ8, change stretch back. 5. Select player, release pause. There has to be a better way! I really don’t like constantly having to select device, I’m thinking with a tablet and Home Assistant, I could avoid this by having controls for all the devices on the same dashboard. From watching your video however, I’m thinking that with the Sofabatan, and possibly the Harmony, using the activities capabilities, I could control everything without having to jump from device to device. Is this a correct assumption? Thanks to your video, I may be able to get either the Harmony or the Sofabatan to solve my problem. I’ll look more into it when I get home in mid May. Thanks for posting such a well organized and informative video on the Sofabatan.

[@Porsche49]

Yes, that’s correct. Use activities.

[@veeracs]

Does it work with Emotiva RMC-1L? Excellent tutorial🎉

[@Youthman]

They have the codes for the RMC-1 and RMC-1L.

[@Shane.b]

Ok so I have a... Lg c3 83' Dennon 3800 Pana bluray Nvidia shield I have all the activities set up and is working well the issue I'm having is for example if I'm watching shield and want to switch to let's say bluray it shuts everything down and all I want to do is have it switch between inputs on my Amp and turn on the components I want ....I've tried everything but can't figure it out had anyone had this issue.? I have all components plugged into my Amp and one going to tv thru earc

[@LoganRST]

Can this load projector memory presets as well? I have different color settings saved for HDR/SDR content. I suppose a custom Macro could likely be created as worst-case scenario.

[@Youthman]

Absolutely. I use a mad VR so I do not utilize the memory presets. But yes, when you create the activity or even after you have created the activity, you can simply add a command for that memory preset. You may have to add a delay in between say, turning on the projector, changing input, and then the correct preset

[@bluemetal04606]

Got mine with your link, works good. I had no issues with the remote learning. Either they fixed it with an update, or the remotes was possibly RF? Only issue I'm having isn't really an issue, but a little annoying. When I set an activity that involves switching sources on my AV receiver, it has to "turn on" before switching, even if it's already on. With my receiver, it triggers the relay switch every time. Is there a way around that?

[@Youthman]

My Harmony Elite is the same way. If a device is already on (like my projector and my Marantz processor, if I switch from Kaleidescape to AppleTV, the commands will be sent for the AppleTV which includes turning on the Marantz and the projector. Nothing happens because they are already turned on.

[@BennyThePhotographer]

Good job!

[@Youthman]

Thanks Benny!

[@70grade37]

Great Video! Very thorough! Does it take Mola Mola products, Zapitti, Innuos???

[@Youthman]

The database shows 10 Zappiti products. Innuous is not listed so you would need to learn those codes.

[@markhammon1299]

My Anthem 1120 can change the inputs by clicking the left arrow.

[@AlmightyGTR]

One reason I haven't picked up Sofabaton is Logitech support. They still continuously update device profiles, and ensure that all these power on power off profiles and sequences are pre configured. Massively reduces the setup time. Other reason is small amount of buttons compared to Logitech Harmony elite. Third is PC compatibility, it is a little lacking when compared with Logitech.

[@Youthman]

Yes there are still some features that Harmony has over the X1S. I’m just glad they are continually improving.

[@AlmightyGTR]

@@Youthman Absolutely agreed!! Logitech didn’t get there in a day. It is a process. I just hope new home theatre people get similar benefits with this option, rather than paying black market prices to pick up old harmony elite remotes.

[@unixsuperuser]

I have been looking for a smart universal remote. Thanks for making this very detailed video.

[@Youthman]

Glad you found it helpful.

[@wayneross9723]

Can you do a review on the xgimi horizon ultra mk2 please

[@uccoffee]

I still think logi harmony was the best, after that, I think I just use a chromecast remote for everything (except aircon)

[@MobiusGT]

any chance the remote has a built in mic? I would love one that works with my apple tv since im always so worried that remote is gonna break

[@Youthman]

No mic on the X1S.

[@markhammon1299]

Do you need to use the hub? I saw you hooked up the blasters to the Anthem and Kaleidiscape. BUT you didn't show if you used one on the JVC Proj. So I am assuming the remote turned it on without the blaster. I'm not a fan of having wires semidraped over my equipment

[@Youthman]

Yes the remote does not have IR so the hub is needed. Honestly, I’m was not sure how it turned on my JVC which is in another room. But I just put a box in front of the Sofabaton Hub and it did not turn on my projector. Moving the box it allowed it to turn it on so the IR blaster is able to turn on my projector from 16’ away.

[@keningilbert]

Back on 2021-10-07 you posted the video "Say Goodbye to My Harmony Elite Remote? - YIO Remote Two" A few days later you did a Zoom meeting with the YIO team. Now, 19 months later, is the YIO/Unfolded Remote Two or the Sofabaton X1S better?

[@dansantoso48]

Does it work with trinnov? Can it change its preset? Also do u use IR cable extender for JVC? Thanks

[@ThatHz-]

Nice to see it has RF by Bluetooth. Can’t wait to see how this stacks up against the unfolded circle remote.

[@Youthman]

The Unfolded Circle Remote 2 has MUCH more features than the Sofabaton X1S. But I would hope so at $480 USD. Hoping to get one in for review eventually.

[@techcode_man]

Nice review Michael 👍. Are you switching to Sofabaton X1S?

[@demohce3369]

Hi Michael, can you also do a review of the AVA Cinema Remote as it looks to be matured by now.

[@Youthman]

AVA now has to be programmed by a dealer so I won’t be reviewing it

[@thereviewer583]

Sofabaton XIS every thing I need in a remote

[@Howie57]

Starting to like this remote, for me a touch screen and a charging dock is needed

[@Rayman-expertsoundpro]

Sending mine back unfortunately. Would not communicate with my Zidoo Z9X which is the next room connected with IR blasters. Harmony works like a breeze.

[@DerekBove]

Great video, Michael! I decided to give thr X1S a go. I've been using roomie remote (which is fantastic) but it's a subscription fee and i miss having physical buttons.

[@Youthman]

I’ve heard of Roomie but haven’t used it myself. Let me know what you think of the X1S.

[@DerekBove]

It's too bad, I really like the remote and the app, but the IR blasters are the weak link. I can't get them to turn on my projector 4 ft away pointing directly at it. I'm guessing they have to be sitting in front of the sensor which is too long of a run and my hub doesn't have line of sight so I think this is a no go for me 😞.

[@Youthman]

@DerekBove the small or repeaters are meant to attach directly to a single component so they won’t be able to turn on a device that is 4’ away. Can you place the main hub more in the open? During my patron zoom call tonight, one of my patrons has been using it for the past two weeks and he has the hub sitting on top of his audio video cabinet and it is able to turn on his AVR that’s inside the cabinet.

[@Youthman]

@DerekBove then he uses the small repeater to go inside the cabinet to turn on his Kaleidescape

[@DerekBove]

@@Youthman that makes sense, I figured that was the case. My equipment is on a closet at the back of the room so I can't get line of sight to the projector and the components unfortunately.

[@Oliver-hp7rk]

The app interface looks identical to the Harmony app. Did they buy some of the technology from Logitech and build off of it?

[@Youthman]

I’m not sure. That would be a smart move if you ask me because the Harmony database is massive.

[@CarlosGomez-THX_1138]

Great tutorial, though!

[@sonic6618]

Hi, I’m reading reports that the X1S doesn’t work well with PS5, is anyone using it with theirs and what is your setup?

[@johnpires6639]

Hi Michael, will this work if the hub is in another room with the audio equipment, or does it have to be in the same room?🤔

[@Youthman]

The remote communicates to the hub via 433Hz frequency. I was able to be just outside my room around the corner to control the system. I would imagine it depends on how far you will be sitting from where the equipment rack will be

[@RickSanchez-rl6dc]

Great review. Extremely informative!

[@Youthman]

Thanks but I will make a separate review video where I’ll share the differences between it and my Harmony Elite.

[@glennchaffin8446]

Sorry to say, but you lost me when you started hooking up the repeaters. I have a remote caddy for my 6 remotes and 90 percent of the time I only use two of them. I think I will save my $200 and stay with my setup till something better comes along. Great video on what can be and thanks for keeping us informed 😁 A loyal subscriber.

[@Youthman]

Nothing wrong if your current system is working for you. This is for someone that wants to simplify their remote situation.

[@skylerk1962]

Hello I have a theater room with the projector, and an equipment room where I have my anthem and other equipment stealth away, my question is, how do you turn on and off the projector using the IR blaster? It is not in line of sight of the hub, or the other IR blasters that are in the equipment room.

[@skylerk1962]

Did have to get a extended IR emitter cable to reach your projector?

[@Youthman]

I do have an extender but it’s connected to the Harmony I’m not sure if the Sofabaton IR blaster is what’s reaching the projector or if it’s somehow sending Ir commands from the Sofabaton hub into the Harmony Hub and from there through the wired repeater.

[@skylerk1962]

@@Youthman I bought a 25' extended IR emitter from OSD, IR21CG25 25ft Single Eye IR Emitter Cable, with a 3.5 mm pin, it will be here soon. I'll have to thread it from the hub in the closet, then through the attic, to the projector. That will be so much fun, lol Did you pair the Sofabaton X1S with the Harmony Hub, I still have my old Harmony hub, remote, and cradle.

[@kieranmcanimal3596]

I discovered that I could use a 3.5mm to 3.5mm stereo jack cable between the hub and the Flasher In connection on my Marantz AVR to control it without having to use infrared.

[@voiceofreason9238]

Does it use the mono (1 ring jack) or stereo (2 ring jack)

[@Youthman]

The X1S hub has mono

[@kieranmcanimal3596]

So in theory a 12v trigger cable from the hub into the flasher in jack would also work.

[@voiceofreason9238]

@@kieranmcanimal3596 Correct. FYI I once tried this direct wire technique with a Sony AVR which specifically had the 3.5 receptacle and it didn't work for me. I had to use the IR sensor with the sticky tape, a poor second choice IMO.

[@francocastilloAR]

Is there a way to make it "homemade", personalized and cheaper.

[@twilliamsenator]

Nice review. I got on and can’t get it to trigger my NX7. Any ideas?

[@curt248]

Any solution yet?

[@garyharper2943]

Still love my 25 year old Philips Pronto!

[@Youthman]

Oh man! I haven't seen the Pronto in several decades. :)

[@garyharper2943]

@@Youthman Still works great, but I lost pronto edit capabilities, because it hooked to the computer with a serial cable. I’m 72 and I think it will outlast me! Talking about old …I still have a Pioneer 301 dvd changer that also works like new, they don’t make them like that anymore.

[@northeastcorals]

Now that is a blast from the past!!! Weren't they steam powered? 😅

[@garyharper2943]

@@northeastcorals They are more dependable than the current crop of 4K players.

[@Porsche49]

Wow. I have a Pronto and a Pronto Pro, but haven’t used either in many years. I’ve got a whole-house Savant system at my house and a Logitech Harmony at for the entertainment system at my cabin.

[@Linkone7]

@Youthman Did you officially switch to the AVM70? Or just reviewing? I, like you, had the Marantz 7706 but recently upgraded to an Anthem too (AVM90).

[@Youthman]

No. It’s still in for review. No decisions yet on whether I will be purchasing it or returning it after the review.

[@curt248]

I have a 7706 now and am wondering if there are any noticeable improvements to sound quality with the avm? Or sound differences?

[@california1782]

Best wishes for this new Sofabaton team. I have watched couple of full videos of Sofabaton. This is only my opinion and never saying it has to be others too. When it comes to me - Harmony Elite rules the Earth in this section. For that price, well made product, great custom-service and the thing you can do with it, Sky is the limit. When you take above reasons, Logitech Harmony Elite is Legendary. Buy the time I get into my hand Sofabaton will cost almost $700.00. NOT A GOOD STARTING PRICE FOR A UNKNOWN BRAND. Such alittle screen, Black and White. Sofabaton for sure is not my cup of Tea. Thank you for this video. 9 If I have double posted this I apologise.