That idea looks great, just feels like it need to fill out the whole length of the spoiler, then it will look sick
@SpiffyDay7 жыл бұрын
amen brother
@czar_aznable50187 жыл бұрын
that's what i was thinking
@kiret_4eva7 жыл бұрын
and maybe be more gradual. ie. rounder to match the shape of the wing almost like a little ducktail spoiler on a spoiler
@1996badboy19967 жыл бұрын
agreed!
@ShadowSTI7 жыл бұрын
Also good on you Jesse for helping fight cancer!
@itschuchundra7 жыл бұрын
I love the way the mock up looks, I think it'll look better if it goes across the whole top of spoiler until the point where it starts to bend.
@ericshea45057 жыл бұрын
Driving Japanese, eating Japanese, are your girlfriends imported too?
@fakessti_48527 жыл бұрын
dump the clutch 454 welp Davids girlfriend is Asian. Sooooooo
@ericshea45057 жыл бұрын
Ryaaan_Ohmz Lmao didn't even know haha
@Dk-sx2sd7 жыл бұрын
Do they not have a burger king nearby ....They eat an awful lot of Asian food id get bored !!!!
@dumbestoyster7 жыл бұрын
Dk 35 burger king sucks here.
@ItzEmu7 жыл бұрын
it sucks everywhere Five Guys > Burger King
@paulpaul80927 жыл бұрын
it looks pretty good but maybe try making it longer accross the wing and see if that looks better. not all the way across where the wing starts to curve but just before the big curve if that makes sense. like just a few more inches accross on both sides.
@lyndasmart94777 жыл бұрын
That's exactly my opinion
@tommyfitzsimons93167 жыл бұрын
Paul Paul agreeed
@ddsaxx6297 жыл бұрын
Honestly personally a big reason why it looks soo good on the r32 is because its a short wing its not soo high , so if there was a way the that stock wing was just a bit shorter not so high it would honestly work 100% i love the idea man
@FoxtrotVids7 жыл бұрын
I love that addition to the R32's wing too, shit's dank. Personally I think it looks a lot better on boxy wings, like the TRD wing. Also I think it's pretty fantastic when there's some writing on it, give's it a little more personality.
@traxxasslash957 жыл бұрын
I just shaved a bunch of hair off for a cancer research charity too haha good work Jesse! I think the wing look would work really well on a TRD wing.
@dillonrettig58657 жыл бұрын
I think it should be longer then at the sides taper off into the flow of the wing so it looks more aggressive but yet low profile like it's built in and only a Supra owner would know that it's not stock lol that's what I would do
@thesensei76267 жыл бұрын
It looks great! I would say you can continue the "lip" across the spoiler. Or like you said, you can swap the spoiler for a TRD wing. Overall, it looks great!
@extremetaco41827 жыл бұрын
Can't wait to see you guys at driven!
@matteohaller52107 жыл бұрын
I I feel like the wing attachment would look better on a trd wing. It looks pretty good but the reason it looks so good on the R32 because of the slightly more squared look of the spoiler. Keep up the good work Jesse!
@lyndeneinboden20497 жыл бұрын
Personally I don't really like the extra wing thing, but I think that it's really cool that you want to do extra stuff to your car and do what you like.
@weynschenk7 жыл бұрын
car edits and food edits... lowcals>
@marcflameling77607 жыл бұрын
sick idea and keep doing what you're doing man,only reason i watch this channel is because you guys do and make everything yourselves and that's the reason i love the vids so much.
@tobiasdegouw22467 жыл бұрын
Make the rocketwing wider dude, about as wide as the rear windshieldspoiler. Otherwise it will look kinda out of proportion. Concept is really cool though. Oh and btw, i knew that eventually the trd wing would grow on you ;). Cheers man!
@patrickwkp7 жыл бұрын
That is actually a good idea. I hope to see full video on how you fibreglass that. I would want to learn and apply it on my car. Cheers!
@JaceCrozon7 жыл бұрын
that's a cool idea Jesse. I think it'd look better if it tapered off closer to each side of the wing. It would flow a little better with the car
@Salimji267 жыл бұрын
I think the spoiler will look good if you curve it so it blends a bit more with the rear end. I personally love the do luck spoiler for the supra and looking for something similar for my 2008 Lancer
@blathers_137 жыл бұрын
think the gurney flap/wing extension looks great, just the only improvement could be to extend along the length of the wing I guess
@andyjzx39847 жыл бұрын
Cool idea, definitely unique for a Supra. I'm unsure if I like it for such a high wing but what I've seen so far looks alright.
@logenmoles63807 жыл бұрын
First of all, I love the originality of the idea for your spoiler. That being said, I think it could be wider and possibly a bit shorter? Good luck.
@KimDelaCruz7 жыл бұрын
best method would be to get a sheet of abs plastic, and heat i to bend to desired shape and cut to desired length. It would be the most quickest way, plus if you were to use your OE wing, you can some screws and cut slots on the dancer spoiler to make it very adjustable. check out the 2016 z06 Corvettes they have a similar style, it does serve a function when at high speeds
@La_maldita_ss877 жыл бұрын
You could cut into the wing and make the shape more clean but you would need to find out what length you want
@KaiHammy7 жыл бұрын
Maybe you could sculpt it to curve into the rest of the spoiler, I think it'll look great :)
@JackOfAllScream7 жыл бұрын
finally some Supra content!!!!!!!
@SBTStudiosMC7 жыл бұрын
Personally think it would fit better on a trd wing, I feel it would just add more aggression to the already aggressive trd wing, unlike the smooth curves of the stock wing, also, I suggest making it longer, and span the whole wing. Like it's meant to be there, not just an add on universal gurney flap or something. Great work tho, keep it up Jesse!
@mitchisevil56717 жыл бұрын
personally i think it needs to be longer cause its kinda like just a random piece in the middle but its a great idea!
@meeryg7 жыл бұрын
Would look better with the TRD wing cuz it's similar to the original r32 wing lip then... feel like on this wing rounding of the corners to match the angle on the spoiler would also look good tho.. good luck!
@OhItsPhi7 жыл бұрын
I feel that this would look better on the TRD wing since the top is more boxy
@damienbickle51307 жыл бұрын
It's a really cool idea but I think the rocker extension needs to be a little bit wider
@nathanduran90997 жыл бұрын
Looks pretty cool but have it kind of fade out and get smaller as it gets closer to end
@silintkiller9117 жыл бұрын
looks cool but if it flows more with the curves of the stock wing it will look dope
@jorgeheraud89217 жыл бұрын
jesse use a trd spoiler and do it on that
@adenrimmer72607 жыл бұрын
i dont know how i feel but you do you homie
@konamimgs27 жыл бұрын
Its your Supra do what you like with it bro
@jonathanaviles137 жыл бұрын
def need to go a little wider with it i think it would look great!
@GucciGunpla7 жыл бұрын
If it flowed off the edges a little more maybe sloping up on the sides instead of the boxier look I think that would be pretty sick
@imSchwaggy7 жыл бұрын
work vsxx , probably not but just my guess . i have work vskf's for my e36 6inch lips just came in for the rears 18x12 et38
@LuisMartinez-iu1tf7 жыл бұрын
it looks good bc it is original and also looks good
@anthonysmalawipredators87947 жыл бұрын
needs to be longer
@marcoluna74177 жыл бұрын
That looks good all you should really do is extend the the whole length of the spoiler.
@anthonymiranda3737 жыл бұрын
what song were you guys listening to in the car on the way to edo
@bustadenchill30657 жыл бұрын
Looks cool bro ! Original asf !
@imSchwaggy7 жыл бұрын
I was told that when you donate hair, they charge the cancer patient a few hundred to $1000 dollars to receive it. Unsure if that's every company but yeah.
@InBoostWeTrust7MGTE7 жыл бұрын
Hey Jesse. Im die hard Supra fan and i like your build so far. If you really like DIY and you want to make it yourself, maybe consider to make it on the trunk itself not actual spoiler? I think the shape you're trying to achieve will not really fit together with the shape of the original spoiler. It would work better with TRD spoiler. maybe just remove stock spoiler and test fit your idea on the trunk itself like "rocket bunny" spoiler but it will be your unique design. Just because you thought of making it on the spoiler itself doesn't mean you can't experiment with different scenarious. try and maybe you will like some other idea better :) i really hope you will see this comment greetings from Latvia
@janprokopenko79287 жыл бұрын
The wing looks cool, but I'd look cooler on more square wing. The oem supra wing is kinda triangle shape and it doesn't really fit.
@Nickolby1237 жыл бұрын
wing looks wicked, i just wouldent use any materials in it that hold moisture, like cardboard. maybe strips of a thin plastic instead.
@Mark_Ser_Spec_V7 жыл бұрын
loooks great just stretch it out more then it will be greater🤘
@O912877 жыл бұрын
i like when jesse is in the videos, he talks better.
@F48l4N996 жыл бұрын
Well it's definitely original and pretty cool, I'd prefer I little longer tho that's all.
@thatonehatedtimmy47447 жыл бұрын
carbon fiber would look nice love your mindset fam
@tomfod967 жыл бұрын
Some Work Meisters
@LvLaxroyOninstagram7 жыл бұрын
I say it would look better on a TRD wing
@jjjabbour56307 жыл бұрын
I think the the wing lip should be wider but otherwise great job bro 🔰
@VynzBrah7 жыл бұрын
You need to make it longer, it's a bit too short in comparison to the spoiler in my opinion, up to you bro, but nonetheless I love your creativity with cars. I painted my calipers in yellow too on my Stagea, they look mint as fuck :)
@JonnyJonDogg7 жыл бұрын
i think it needs to be a bit wider, great video :)
@djegaming43257 жыл бұрын
The people have spoken my lovely jewish friend. Widen that shit a couple inches Jesse!
@atlJE7 жыл бұрын
yeah you should make it go all the way across the spoiler, then it'll look better. looks weird now
@imSchwaggy7 жыл бұрын
Those are called gurney flaps, or wickerbills. just incase you didnt know the name.
@He8MyHand7 жыл бұрын
Make it as wide as the tape (where the spoiler begins curving) and it'll be sick
@victorvega13147 жыл бұрын
Make it longer and it will look mint
@ishreyes36457 жыл бұрын
i think it would look better with if it was more longer not as small try it!
@JoelVigliotti17 жыл бұрын
I think you're trying to hard to be different imo. But if you're going to do the gtr style, maybe make it longer and maybe tapper it down towards the ends if that makes sense... kind of like if you're looking at a mountain in the distance lmao
@j.r.galluzzo92547 жыл бұрын
Make the whole length of the spoiler, and make it flow off the natural spoiler line. Looks outta place as is imo. Cool idea though. And, of course, dont use cardboard and electrical tape ahah
@liampink87047 жыл бұрын
music?
@s550moe47 жыл бұрын
Notification squad? ☺️☺️
@MRSAkrd7 жыл бұрын
how do you break those chopsticks wrong??? lol
@josephbroadberry24247 жыл бұрын
Not a fan personally, maybe it would look better if it covered the whole top bit of the wing?
@Smokesuminc7 жыл бұрын
Make it longer
@shadowspeed2007 жыл бұрын
does David Have a snap?
@carlosmorales71547 жыл бұрын
In my opinion it'll look better if it was longer like until it starts to curve down and a little shorter in height.
@Joey-el7ud7 жыл бұрын
I think you should make it bigger
@infure7 жыл бұрын
Why would you say his work name?... I can now easily narrow it down
@FierceToast7 жыл бұрын
for my personal taste, i dont like it, but i think it would look better if it filled a little mor of the spoiler
@tombrown81027 жыл бұрын
doesn't really suit the car I think but maybe try the lip wider maybe another 4-6 inches each side
@tyeb.38987 жыл бұрын
Needs more wide
@NickBomers7 жыл бұрын
love the way you do a full edit of the food XD
@williamneigum70027 жыл бұрын
needs to be wider
@TheLager977 жыл бұрын
dude, get the other type of spoiler for supra and do it whole lenght
@Derek-vq2wx7 жыл бұрын
Been waiting for some Supra videos 🙌🏽🙌🏽
@lawless87237 жыл бұрын
looks interesting..I feel as though it should be wider, like just inside the uprights of the stock wing....and not as tall..so that it looks like it flows out from under the wing instead of being just stuck on to the back/top of it..hope that makes sense
@Denver544xxx7 жыл бұрын
I think it needs to be wider Jesse, but its definitely unique keep it up!
@dumbestoyster7 жыл бұрын
Hey Jesse. I live up the street from you, & see you guy's around all the time. It's really great to see the younger generation of car enthusiast, actually working on their own cars like you guys do.
@SpencerHogg7 жыл бұрын
😍 Keep warm homies
@The_JDM_Dynasty7 жыл бұрын
Will sponsor you some heat, dying this side!
@gurvir76387 жыл бұрын
NinjaxBart I live in Calgary with these guys and it was -25C and is getting worse!
@evoljfe487 жыл бұрын
Get a TRD wing
@evoljfe487 жыл бұрын
Would look dope af
@austinsmiht7 жыл бұрын
He wants something original though.
@tannertyrik62517 жыл бұрын
EvoLjfe that is original
@Big_Neve7 жыл бұрын
I don't personally like that style wing it dosent really fit the flow of the Supra and it looks a little ricey. I think you should definitely go with a trd wing they look sexy af
@charlesr.337 жыл бұрын
Jesse the DIY Guy
@YehhJosh7 жыл бұрын
Damn, that's how you know Canada is a safe country... the paint isn't even locked up lol
@VaderLand37 жыл бұрын
scrap the idea man. it ruins the already classic wing that makes a supra a supra.
@rolandcita19607 жыл бұрын
U could have done the spoiler with expandable foam. Like cover the supra spoiler with tape, put the foam on it, wait till it hardens, and after that cut it like u want. After that u can fiber glass it and so on.
@Jessefsjp7 жыл бұрын
I was thinking of redoing it with this method actually !
@WelshyAutomotive7 жыл бұрын
Make it taper the wing, but not the entire length of the wing, maybe just smooth the sides out and make it more streamline.
@Hauuy-el1vv7 жыл бұрын
Man, you gotta do that wing in carbon asap
@DingDongDaily7 жыл бұрын
the lip should be wider and taper down towards the corners of the wing i think. right now it's like just... there...
@SpiffyDay7 жыл бұрын
TRD wing with that lip thing ur adding would look sweet because it's flat rather than curved
@CanadianPsycho7 жыл бұрын
Im going to work on Charles Skyline Friday and Saturday can give you some pointers on how to make the shape and get it to form up good .- James
@mikhailmendonca97397 жыл бұрын
I like rocket dancers alot, but this one doesn't work that well. I think it'll look alot better if you buy the TRD wing and then put the rocket dancer on.
@jackmccormick38247 жыл бұрын
Also some e30 and e36 spoilers were made with the wing extensions. Cool video, i like when people explore their creative side on cars.
@juanmouton50967 жыл бұрын
keep the stock wing, maybe it would look better on the TRD wing
@jupjeet57 жыл бұрын
make it wider jesse. have it an 5 centimetres from the ends and a little taller. but it looks fucking badass
@imrinox44937 жыл бұрын
Id love to see that on a TRD wing, would fit it better than the original one in my opinion.