Z32 Polar Engineering Throttle Bodys Review & Install, The Nissan Z32 300zx Twin Turbo Mega Build.

[@muddlersworkshop]

We dedicated watchers of your channel do not care how long your videos are, we will watch it.

[@TheAussieShed]

Awesome Mate, thanks for the Comment, Cheers.

[@rickymale8203]

Love the longer videos mate. All the best👍

[@TheAussieShed]

Cheers Mate👍

[@hakinen4000]

great video Trev. I like the detail and explanation, wish I had the tool selection you have, like the lathe a mill, etc. Looking forward to the next one.

[@TheAussieShed]

Thanks Rob, yes, the tools certainly give you options, after 2 divorces its a wonder I own anything honestly. Lol. Cheers Mate.

[@jeremysteib8378]

Awesome work! Thanks for all the time and effort you put into your videos to assist us with our installs! Cheers

[@TheAussieShed]

My Pleasure Mate, Cheers.

[@kimber1958]

I will be back at it shortly just a little bit down wintertime blues, I suppose keep cranking out the great videos

[@WayneCook306]

Well done Trev great job, Nothing like a good grind Mate. 👍👍👍👍👍👍👍👍👍👍

[@TheAussieShed]

You got that right. Cheers Mate.

[@DCM300]

Enjoying your series of Z32 videos. Very informative. Entertaining. Your attention to detail is second to none. I own one of these cars and still love it. I'm a professional mechanic and you have taught me a lot. You are a great teacher and keep up the extraordinary work!

[@TheAussieShed]

Thanks Dennis, appreciate the comment Mate. Cheers.

[@devons2gda]

Great work Trevor! As always, I'm very impressed with your level of skill. Thanks for sharing your knowledge and thank you for not breaking the video into two pieces. Cheers!

[@TheAussieShed]

Always a pleasure Mate, Cheers.

[@codasinmurry]

Brilliant acting Gary even after an hour I still wanted more No one will recognise you. 👍👍👍👍👍

[@TheAussieShed]

Top Secret Cover Gary, Top Secret.

[@SeanEpoc]

really enjoyed the meticulous nature and attention.

[@TheAussieShed]

Many thanks, Cheers Mate.

[@jeririch1143]

Just received my polar under plenum rail . Excellent quality. Thank you for the detailed vid on these throttle bodies for future reference!

[@TheAussieShed]

My pleasure Mate, Cheers.

[@ZDemBoyZ]

Ordered a set for my 90TT. Haven't received them yet but I'm waiting. You just made me even more anxious to get them. Lol

[@frog7118]

When I asked what was painted on the manifold side of factory throttle plates, I was told that was some kind of buildup. These are brand new throttle bodies and have what I asked about. Another clue that it was OEM applied? There are clearly brush strokes in it. It's there to create a perfect seal. Excellent point of using thick glass for a surface plate. Molten glass is poured and gravity forms a very flat surface as it cools.

[@frog7118]

Nice job cleaning up the top of your upper manifold. I stripped the bottom side of everything but the two freeze plugs and the four bolt on bosses and blended the outer flange to the lower manifolds profile and port matched them of course. No EGR flanges, no water manifolds, not needed, GONE. You can't see what I removed when assembled, but I knew it was there and didn't like it. Just like I removed EGR mount from rear of lower manifold and blended the profile.

[@perpetual_desolation]

Love ya Trev, my neighbours also hate my die grinder.

[@bspradley]

Another excellent video Trevor. I appreciate the extra time and the detail of the video. I am curious, is it a worry to have the debris falling into the manifold as you grind and whatnot? I am new to this stuff so I do not know.

[@TheAussieShed]

G'day Mate, yes, the Intake will need to be removed from the engine to perform this process. A thorough clean out is Mandatory after anything like this. Cheers Mate.

[@erictorres1365]

Excellent work Trevor. Have you heard anything from PE about the motorized throttle body actuators they were designing to install DBW?

[@TheAussieShed]

G'day Eric, not at this stage, I think I remember something about it being released early this year. Maybe Polar will mention something in the comments. Cheers Mate.

[@Defiant155]

I’ve actually been chatting back and forth with Polar over the DBW system. Right now, he has said he’s focusing on getting the orders that were placed around the holidays finished up so he can turn his attention fully to the DBW finalization and he’s hoping to have the orders done in the next couple weeks. So hopefully that sticks.

[@eckqu]

Good job 👍

[@TheAussieShed]

Thanks Mate.

[@gtools9137]

Get out the "Armstrong Milling Machine" Piece of glass will usually do a a flat surface.

[@frog7118]

Didn't have the money for Billet Throttle Bodies. I found a pair of OEM bodies on eBay that were over bored for $100. Cut off all traces of the water cooling and removed all casting flashes. Removed that clunky manifold which connects to small hole below the throttle plate which I thought may be a mistake. Looking at these billet bodies which do not have this, I may be all right. Ended up with OEM bodies that look like billet for a lot less.

[@Defiant155]

Hopefully we see how to handle the balance tube soon. I have mine torn down similar to yours and am copying along lol

[@kimber1958]

The longer videos pay more revenue

[@TheAussieShed]

True, but youtube doesn't seem to push them at all. I guess we'll see. Nice to hear from you Mate. Cheers.

[@kimber1958]

In my opinion, one hour is not too long

[@TheAussieShed]

Thanks Kimber. Cheers.

[@billsimpson2392]

40:28 I use bee's wax Trev. Is that bee's wax or regular candle stuff? Bee's wax is a bit pricey I feel! But I agree, it's a game changer. I even use it on my zip cut blades and flap disks when working with Aluminum. Good shit! 👍👍👍👍🦘🦘

[@TheAussieShed]

G'day Bill, yes its Bee's Wax, Friggin Game Changer Hey. Cheers Mate.

[@billsimpson2392]

Bloody great. But got to remember to clean it off well if TIG welding afterwards! hahahaha@@TheAussieShed Ask me how I know! 😊😊👍👍