Even though I have seen this video a long time ago I think I didn't get enough of my attention on it and I see how I struggled.. thanks again.
@patrykchmurski3 жыл бұрын
This video solved my issue with Raspberry Pi over mobile ISP with Active agent. Thank You!
@mwildam3 жыл бұрын
I am new to zabbix and gone through a few related videos now. You are doing a very good job on explaining zabbix, the speed of demonstration is very good for me and you have a good and clear english also. Thank you!
@MrBitviper2 жыл бұрын
thanks for this tutorial... finally got the active agent checks to work correctly much appreciated!!!
@WolfgangRheinschmitt4 жыл бұрын
Tried for hours. You saved me. Thanks a lot for the well structured explanation!
@tewodroshailehabte17633 жыл бұрын
Nice explanation. I have the following questions for you how to configure the below :- ATM Operating System Blue screen Host links, Switch links, Card bases TCP/IP, Ports, Process Transaction Response Time Time out TPS Approved, Denied, Failed, Reversed, Unsupported, Response Code Errors TCP disconnected, MAC errors 14. Geographical display of ATM Networks Geographical display of ATM Networks
@lanceeilers50615 жыл бұрын
Thanks Dimitry for a very informative vid , It was nice to see how the config file is read and the default values that are taken from the system , have a great one and keep smiling best regards Lance
@dmitryi44835 жыл бұрын
Another great video, Dmitry! I always find something new and helpful in it. Keep it up! Want to propose a topic for one of the next videos: Remote Commands. Think it would be interesting for many folks. Thanks!
@zimeon5 жыл бұрын
Would like to see this as well, and perhaps an example with remote commands with parameters from alerts (like starting a service).
@karthikraja37025 жыл бұрын
Nice video clear explanation about active and passive checks.
@Certifiedsenpai004 жыл бұрын
Thank you, after watch This I Resolve my problem.
@javiertograalvarado22394 жыл бұрын
Very good video Dmitry, thankyou... A little question: any item can be configured as active or passive agent? Is there a list about what items are for active o passive monitoring?
@themateoo5 жыл бұрын
Hi, great video and explanation, It seems like the 'out of the box' templates are mostly built from passive checks. So if I want to offload my server then I have to build my own templates using active checks only? It's impossible to simply choose the way of monitoring without this additional work. Am I right?
@diogobrasil1422 Жыл бұрын
Thanks , it helped a lot.
@davidhorvath64894 жыл бұрын
Thank you, after watch This I Resolve my problem. :)
@kandathmuraliАй бұрын
I configured Zabbix agent active check, should I also add interface? I have also added templates Docker by Zabbix agent active but Container Discovery does not get any data? any help is appreciated!!
@BaranyaiGergely5 жыл бұрын
Hi, Thanks for this useful video again. I have a question about active agent registration. Is there any easy way to switch the agent interface to DNS instead of IP? I found how autofill works with PTR records it's fine. I found USEIP field in the DB but I cant find any simple/correct solution to switch it without modifiing the database. I talk about thousands of clients, I dont wanna make it manually of course :)
@SabaMastero4 жыл бұрын
@ Zabbix - Hi Thanks for this. can you show what is written in zabbix active and passive template
@harshitamin5 жыл бұрын
HI Dmitry, I am looking for some help in adding host groups in Zabbix in bulk from CSV file(are sub groups available? I believe not) . also I have to add SNMP hosts in those respective groups around 3000 switches. would you be able to share some script. I also would like to request for a video on Vcanter monitoring with using the tags of Vcentre to create the respective host groups. I have watched your video and I use them as my reference point when I get stuck. your are doing great effort to help other Zabbix enthusiast . I highly appreciate your work. You are doing wonderful work to help and grow the Zabbix community. Thanks in advance.
@sergeileshchinsky4 жыл бұрын
5:20 "I have my zabbix server installed on Virtual Machine, outside of virtualization..." (c) Dmitry улыбнуло :)
@nunofernandes88574 жыл бұрын
Yes, it can be. Installed on a VM running a minikube cluster. So, you actually install the agent on the VM, outside the minikube virtualization. So, you lost a chance to be funny.
@krishnaspicy2 жыл бұрын
Nice video 👍
@saeedahmed-lb1iz5 жыл бұрын
Hi Thanks for this. can you show what is written in zabbix active and passive template
@PaperTowelSauce5 жыл бұрын
You are a godsend
@SvenBarthel5 жыл бұрын
Thank Dmitry!
@tatalia92264 жыл бұрын
Thank you
@phandcorp4 жыл бұрын
From what I am understanding, you have to configure active checks on the client side.. Why not just configure the client to ask the server for what it is supposed to check? Wouldn't that make a lot more sense and make life easier?
@muckimaxe2 жыл бұрын
you rock !
@vietbui295 жыл бұрын
Hi team, Can I install Zabbix Agent container in a host then connect and send data in a Zabbix server? Instead of installing Zabbix agent in the host
@leonardorepublo40944 жыл бұрын
Im using zabbix 5.0 but messages "zbx_notsupported: accessible only as active check"
@ArkadiuszSiczek4 жыл бұрын
What SSH client do You use?
@bencheikhayoub34 жыл бұрын
MobaXterm
@PaperTowelSauce5 жыл бұрын
How to keep IP updated if host IP changeS?
@RAFAELM0RAIS4 жыл бұрын
I want to know the same
@PaperTowelSauce4 жыл бұрын
Rafael Morais they say to use the DNS name instead but that doesn’t work for me
@fcorella49484 жыл бұрын
How did they solve it?
@SirRasor2 жыл бұрын
Everything is set, also firewall is disabled on server and client: "active check configuration update from [:10051] started to fail (ZBX_TCP_READ() timed out) "
@zabbix2 жыл бұрын
First thing that you can do is check the Zabbix server graphs to confirm that the trapper processes are not overloaded. Remember, that Active checks connect to Zabbix trapper processes and if they are overloaded, the connection may fail. If that is the case, open up the Zabbix server configuration file, increase the number of StartTrappers, restart the server and check if the situation has improved.
@SirRasor2 жыл бұрын
@@zabbix Server load is minimal, trapper is okay. Now I disabled all my clients from active to passive and left only one. Still got the same error O.o Also tried with different version of zabbix clients, but got the same error. I also upgraded the zabbix server to the latest version, but no, it's not working. I am completely out of ideas...
@phahedph13975 жыл бұрын
i have a problem with all windows versions where i don't have any response from zabbix agent on windows and it is red color, i have searched in web but i don't get any solution...please help me
@npkashyap5 жыл бұрын
Please remember to open TCP Port 10050 and 10051 in Windows Firewall
@PaperTowelSauce5 жыл бұрын
i like long videos
@barma13095 жыл бұрын
наймите нормального переводчика с красивой британской речью.... ну это просто жесть слушать