I'm assuming that they wanted to be anime purists with a 5 minute time limit on the psycho frame leds
@mman8w30washere44 жыл бұрын
get in the fucking psycho frame banager is what I would guess.
@JGrove3034 жыл бұрын
I think that’s true for NTD, but once Awakened, I believe banagher is free of that limit.
@StephenBased4 жыл бұрын
This makes me wanna try to start painting. So dope
@kadesoutherland36484 жыл бұрын
You mean you haven't already?🧐
@StephenBased4 жыл бұрын
@@kadesoutherland3648 only got into gunpla a few months ago 😂
@nightmare69metalmatt524 жыл бұрын
If your just starting to paint mind your joints some joints if you paint them will tighten up to much and you'll end of fuckin up your good work AGAIN MIND YOUR JOINTS dont be like me and get a big kit and kill it all because you didn't manage your joints good luck and hope this finds you with a good product in the end
@titan1337604 жыл бұрын
You know it's a special kit when Zach shows part of the painting process. Also wake me up when Bandai releases the inevitable MGEX Banshee Norn
@Jirujan4 жыл бұрын
Bandai be like: "oh, we will make it P-Bandai"
@Adniwhack4 жыл бұрын
@@Jirujan Hopefully that will be the phenex and not the banshee norn
@MJRLHobbyStuff4 жыл бұрын
And full armor/perfectibility/gold plated lol
@KubikCubed4 жыл бұрын
@@MJRLHobbyStuff and 7/11 /gundam base limited/clear part
@car77954 жыл бұрын
@@Adniwhack if it is the phenex, then I expect the whole thing to be undergated and I rlly want it to have the Same type of gold as the Hyaku Shiki 2.0
@MJRLHobbyStuff4 жыл бұрын
I didn’t realize it till recently, but there is a RG Unicorn that is a G-Base exclusive that includes a LED strip. This guy is a major scaled up version of that.
@ZakuAurelius4 жыл бұрын
Yes and also that version is not articulated, it’s a statue
@GigaKaHiis4 жыл бұрын
Now that's an unfortunate choice of font for the thumbnail if I've ever seen one.
@xxEmmankunnArt4 жыл бұрын
let's talk about the first thumbnail and let the new comers wonder why we talk about it
@stormd4 жыл бұрын
Literally clicked on video just to comment about the thumbnail lmao
@JGrove3034 жыл бұрын
Isn’t The light up RG Unicorn a statue, as in completely unposable? It has the pose the one in Diver City has
@ZakuAurelius4 жыл бұрын
Yep that’s right. Which is why it doesn’t seem fair to compare that with this and the PG
@izzy89794 жыл бұрын
Forgive me whoever reads this but man that F is way to close to the I in the thumbnail
@Raindown154 жыл бұрын
THATS WHAT I SAID. WHAT THE HECK IS A GUNDAM *ANAL* REVIEW?
@xxEmmankunnArt4 жыл бұрын
I READ IT AS "A" hahaha
@jerryyang72874 жыл бұрын
Cant unsee it anymore
@DrazekIronwing4 жыл бұрын
you must have changed the thumbnail because I don't see it.
@fezanater4 жыл бұрын
@@DrazekIronwing yeah he changed it
@joshuahensley93954 жыл бұрын
i needed that intro, took a break from building . . . its calling me back
@ZakuAurelius4 жыл бұрын
Get back to it!
@DarkRoomStudio3 жыл бұрын
Beautiful!! Congratulations!!
@ounkeo4 жыл бұрын
Comparing this to the normal MG Ver Ka, I think the MGEX is worth the price. You get a lot of things plus the unicorn itself is not nearly as brittle. It also looks better than the normal MG.
@dominicteoh94753 жыл бұрын
Hey Zach, may I know did you fully sand & polish all the nub marks on the clear ABS frame parts? Did you paint or panel line them in any way? And may I ask the same questions for the milky white frame parts? Thank you.
@vivetuvidaliveyourlife7943 жыл бұрын
Bro I love the colors look really great i hope one day I can make my painting job looks like yours. Nice job
@mut4nt18 Жыл бұрын
I know this is a whole two years later but would you still recommend the kit, did it hold up, another KZbinr said that the leds died
@tterminatemkxvii5804 жыл бұрын
That kit is great! Also that thumbnail font for 'Final' says something else.😅
@theroninmike60174 жыл бұрын
I love the cream white I’ve been wanting to find the paint to use it with my air brush on some kits, any way you could let me know what you use ? Thank you!
@ZakuAurelius4 жыл бұрын
I’ll add the paints in the video description!
@emmansumalabe80574 жыл бұрын
Excellent work as always zack, really love the colors on this one
@chassegallerie29104 жыл бұрын
I love what you did! It's really neat.
@Geekeric4 жыл бұрын
I wish all kits came with good decals like those; I'm looking at you, RG!
@8474Starscream4 жыл бұрын
This looks incredible. Fantastic work here!
@BLAZE0844 жыл бұрын
Love the color for the frame parts. I feel it's worth getting if you've never built the original MG
@polong99 Жыл бұрын
The original is a hand grenade
@DX163 ай бұрын
@polong99 Hahaha, I built the Full Armor Ver.Ka. Planning to get the MGEX, and also the Perfectibility, and to combine all three to have the ULTIMATE Unicorn with ALL of the equipment and additional custom leds to transition from the green to the blue, going from one to the other around the backpack of the Full armor.
@keksisthebetrayed84944 жыл бұрын
I LOVE the cream and tan
@mrcapcom98704 жыл бұрын
Awesome I need those color names ratios pop I love it. Good Job
@starocean014 жыл бұрын
@ZakuAurelius Hi! Great video~ can i ask what color did you use paint the V-fin?
@ZakuAurelius4 жыл бұрын
Character yellow plus fluorescent orange
@Niche_YT4 жыл бұрын
Great work as always! What was your exact process for painting the V Fin? Also I'm guessing you topcoated each part individually?
@ZakuAurelius4 жыл бұрын
Yes and it took forever! Haha. For the v-fin: white primer > yellow on the front > mask the yellow and paint the white armor color on the back. Pretty easy
@1dullman8384 жыл бұрын
for washing the parts, you can buy a small ultrasound washer, it will save much time, and it's cheap
@ZakuAurelius4 жыл бұрын
I have one actually! I use it sometimes, other times do it by hand
@ackmedzambosama5327 Жыл бұрын
Inner frame color is immaculate
@ZakuAurelius Жыл бұрын
thank you!
@AOTLTng4 жыл бұрын
Looks super pretty
@figureviews4 жыл бұрын
I like matte finish on kits. Love it!
@winlaihuang2 жыл бұрын
Love your channel!
@ZakuAurelius2 жыл бұрын
Thanks!
@piesilver42282 жыл бұрын
I turned my led on for my mgex unicorn, the led has been working until it’s just randomly stoped working. I tired turning it off and on again and pressing the button but nothing happens. What can I do to fix it?
@mosb73984 жыл бұрын
I don't have enough experience (or money) to even attempt this kit, yet alone painting. But I'll get there one day!
@Mythicalmage4 жыл бұрын
The colors look great! They remind me of the Beyond Global Gundam!
@franzturdinand67064 жыл бұрын
Awesome job!
@edrianeancheta42152 жыл бұрын
I was silently admiring the lights on my Gundam Unicorn one day and they just suddenly up and died on me! I changed the batteries to see if it was just a low power issue but to no avail. I’m pretty sure it might’ve had something to do with me accidentally leaving it on for a good bit but I was wondering there was a potential fix out there?
@HellStingOzunit4 жыл бұрын
need to use this kit to do a 2.0 unicorn without the lights since the old master grade falls apart
@chacrawarrior4 жыл бұрын
Pretty neat job, I still belive this is a very expensive kit BUT! I can see now This is a kit for really deep Gunpla builders and not for everyone.
@NeoSlashott4 жыл бұрын
1st press is for the Unicorn mode lighting. Just to let ya know the sequence on LEDs. xD
@armin83064 жыл бұрын
I like the more muted palate, it kinda looks like a OYW color scheme
@robinrondo4 жыл бұрын
Thanks for the review as always, amazing kit!! Just wondering, what do you specifically mean by painted? As in top coat, matt finished and painted details? Just for clarification, thank you
@ZakuAurelius4 жыл бұрын
I mean fully painted, as you can see in the montage at the beginning.
@taratornburanaprasertsuk9720 Жыл бұрын
Can i use recharge batter in the LED unit? I don’t know why guidebook don’t recommend it
@itsmepamz24774 жыл бұрын
Since now I can't build 1/144 scale regular size gunpla anymore because its too small, PG is taking too much space, and another 1/100 scale Unicorn kit are... uh... (meh for MG OVA, worst for MG verka). I'll definitely get this kit, someday.
@erraddict3 жыл бұрын
I just fucked up my MGEX, I was trying to transform it from Unicorn to the Gundam mode and when I was pulling the torso, it popped out of it's clips and I yanked the ribbon cable out of place. Now, when I turn on the lights, only the head turns on :( Would I be able to fix this or get a replacement ribbon? Also, when trying to transform the head, I snapped the clip holding in the unicorn face.. I dunno why this kit hates me so much. Does the head use the same parts as the other MG Unicorn?
@browneye0104 ай бұрын
Are the instructions for the leds clear to read? Im really nervous im going to mess it up lol
@ZakuAurelius4 ай бұрын
Pretty clear I think!
@browneye0104 ай бұрын
@@ZakuAurelius can I send it to you to build it for me lol
@ZakuAurelius4 ай бұрын
@@browneye010you can figure it out! I believe in you! Just take your time and follow the instructions carefully
@browneye0104 ай бұрын
@@ZakuAurelius Hey Zach I just finished the whole body and man it looks incredible. Question when the gundam in in nt-d mode is there a slight gap in the chest where you can see the pilot?
@fatesrequiem2 жыл бұрын
Would you recommend painting any of the inside of this kit black to cut down on light bleed?
@LotiMcfloti3 жыл бұрын
Do you think if they ever released PGU Unicorn they'll include Final Battle ver. and full armor?
@Coolio_Ash4 жыл бұрын
Thats... an interesting color scheme
@hvnn50933 жыл бұрын
i have a question is it a very solid kit ? because i built the mg unicorn and the Integrity of the kit is disappointing parts keep falling off is the MGEX unicorn Able to hold itself up ???
@Nu_Chowe Жыл бұрын
Do you have any tips for how to convert it to a permanently on led? Or someone I can ask?
@gsauce19924 жыл бұрын
sir zaku.. what is the name/brand of your display base spinner???
@jpkHouston3 жыл бұрын
You know, if they do make an MGEX Banshee from this (Praying to God it's not P-Bandai) the only way I can see them charging as much for the MGEX unicorn is if they include the parts for the Norn and the Armed Armor VN and BS. Otherwise it's hard for me to see them charging $200+ for it
@ezhumbug4 жыл бұрын
I wonder if it can be configured to wirelessly without manually
@ZakuAurelius4 жыл бұрын
Sure! It could be with the right skill and knowledge
@GGMG4 жыл бұрын
Ohhh yeah here we go. 😁
@NathanNathanNathanNathanNathan4 жыл бұрын
how do you apply and clean up panel lines without ruining the paint
@ZakuAurelius4 жыл бұрын
Lacquer paint, enamel based panel liner
@seamagician70423 жыл бұрын
My rg unicorn has been a pain in the ass. Had to pin the arm with a tiny pin bc the elbow fell off. The part that holds the arms on g35 I think is stressed and loose due to arms that are too tight.
@chillsahil64183 жыл бұрын
this is an awesome build and kit, but I just cant accept the fact that you used such a light color for the inner frame
@AlvinREDDELTA4 жыл бұрын
awesome if PG i would pick this one MGEX because its all complete....
@Cheekymonkey4053 жыл бұрын
What can I do about a cut led strip for this thing? Any advice would be helpful
@JaniumCanium3 жыл бұрын
Yes... This is... *P E R F E C T*
@ltmc2h6944 жыл бұрын
How are you able to glue the joints together and paint them? Will there be revealed underlying plastic where the plastic is covered? Do you deal with that or is it just ignored?
@ZakuAurelius4 жыл бұрын
I didn’t glue anything on this kit
@ltmc2h6944 жыл бұрын
@@ZakuAurelius Oh! I see. Do you paint your joints as separate parts or do you assemble them, then paint them? If you assemble them, how do you manage to paint the hidden spots, or do you just leave it be?
@Jirujan4 жыл бұрын
i wish Bandai would released MGEX Banshee Ver.Ka without the LED unit, prefer panting the Psycho Frame in gold
@BLS.932 жыл бұрын
looks like local type colors!
@seansongzhao82184 жыл бұрын
Lovely
@TTDV14 жыл бұрын
How would you go about top coating the kit without disassembling the kit
@ezrah85204 жыл бұрын
Limb by limb. Usually, you could just take a full arm for example, and stick the joint onto an alligator clip and spray the whole arm at once. It's actually good this way since you get a pretty consistent coverage on each piece. Once dry, bend the arm to get the topcoat into the joints that were covered before. Then just repeat the process for the other arm, legs, torso, head, etc.
@ZakuAurelius4 жыл бұрын
Yeah for this kit almost eve try individual piece had to be taken all the way to the final topcoat before anything could be assembled. That’s why I said it’s a tedious process
@KIANAKASLANAK4234 жыл бұрын
Can it built without the LED since most probably I'm going to paint the psychoframe in red, green, gold or blue. I'm just going chose one of those colors. What color do you think I should paint it
@muisverriet4 жыл бұрын
It can be built without the LED's but there's really no point in doing that. The kit is made for the LED feature and building it without the LED feature just means you are spending way too much money on a kit.
@KIANAKASLANAK4234 жыл бұрын
@@muisverriet IMO, I just find any sort of LED system gimmicky
@muisverriet4 жыл бұрын
@@KIANAKASLANAK423 Then i don't suggest you get this kit. It's entire gimmick is the LED and if you don't build it with the LED you're just really wasting your money.
@evilryu44894 жыл бұрын
Yeah... don't do it lol, getting this kit and not using the leds is a stupid waste of money. You'd be paying 4x the price for an effective unicorn 2.0, which imo is definitely not worth it.
@fantastiCkiLler924 жыл бұрын
The led cost about 10000 yen, if you want to throw it away....cool
@smol_space_donut98814 жыл бұрын
Does anyone know the song he used in the painting intro ?
@xxEmmankunnArt4 жыл бұрын
F for those in the future who will come and thinks why were talking about the letter "F" and "A"
@roynobody4 жыл бұрын
nice!
@thaddaeuswong35744 жыл бұрын
Someone do tertium arms and show how to fix it, please!
@antimime6664 жыл бұрын
Uhhhhhhhhh Ahhhhhhhhhhh, Sounds about right
@bullgrim4 жыл бұрын
So you changed it and erased my post...Hmmm...
@ZakuAurelius4 жыл бұрын
I didn’t erase anything
@theclerksays4 жыл бұрын
Why did you not shade the kit?
@ZakuAurelius4 жыл бұрын
Was I supposed to?
@theclerksays4 жыл бұрын
@@ZakuAurelius It looks like you just painted the joint parts tannish.
@ZakuAurelius4 жыл бұрын
theclerksays yes that’s right
@ZakuAurelius4 жыл бұрын
Ah I see, you’re saying that without shading it looks like I didn’t paint the white armor? Take a look again as the color I used it quite different from straight white 💁♂️
@theclerksays4 жыл бұрын
@@ZakuAurelius It just looks like you used a can of flat coat on the white.
@Suesserto_0004 жыл бұрын
Ana..........
@DrazekIronwing4 жыл бұрын
Seeing your final review, this confirms to me that this kit is far too expensive for what you get with it. - the lighting system is not worth an extra £150 over the original MG Unicorn ver.ka at all. - you can do a far, far better job by learning a little bit of electronics and hooking up your own lighting system for a quarter of the price. I would be interested in this kit without the LEDs for a quarter of the price though.
@j-frame4 жыл бұрын
Not interested in Unicorn Gundam so Bandai help me say money. If the next one is a wing gundam I will also get to save money.
@NoName-wr2nm4 жыл бұрын
remind me again why people hate this kit?
@mosb73984 жыл бұрын
Just as costly as a perfect grade, sticker for v fin, some parts are reused from older kits like the ms cage.
@fantastiCkiLler924 жыл бұрын
Because they can't afford it and lazy to paint simple parts like V-fin
@NoName-wr2nm4 жыл бұрын
@@mosb7398 but still somehow better than a pg
@NoName-wr2nm4 жыл бұрын
@@fantastiCkiLler92 exactly
@seancris45254 жыл бұрын
Haiyaa
@anus68964 жыл бұрын
240 bucks on amazon
@xiopia39403 жыл бұрын
190 at galactic toys
@burnstickman26134 жыл бұрын
Burn stick
@bizerk67843 жыл бұрын
Only thing I dont like is how it overall has a yellowish sheen to it, it looks like a dirty white and dirty metal which doesn't quite make sense knowing the context of the Gundam