Zar's Bike Breakdown in JB!! | Honda CB190X Engine Teardown | Vlog

[@zaronthemove9549]

Ok just to add to this. I did a top overhaul at 70,000km. So maybe some of the shoddy workmanship maybe attributed to the previous mechanic. Initially I had planned to do an engine overhaul at 100,000km mileage. Unfortunately my bike broke down at 91,100km just 9000km shy of the 100k mileage. So its not too bad considering my daily commute to and fro JB - Harbour Front - JB. Farhan keeps belittling my bike because its Made in China and saying i bought the wrong bike and that my bike is problematic etc... Farhan..I can bet if u were still riding your 'Hidayah' you wouldn't be saying the same thing about your bike. Am i right?

[@tambakoverlanders]

I have to face reality that as much as I love the CBF150; the lack of parts, uncommon tire size in the SEA region; being unknown in Malaysia, & Thailand; with it causing more problems despite numerous repairs (including overhaul) towards the end of my ownership, I have to face the fact that it is a problematic bike, which is why I sold it in the first place, with a heavy heart of course. Being an owner yourself, and putting much investment in your bike, of course you'd wanna be in a position to say that the bike is good. However, I have met CB190 owners, saying that their bikes have a lot of issues. Including Fahmi's testimony of him regularly overhauling CB190s.

[@bryannteo5799]

@@tambakoverlanders what tire size does the cbf have? Also heard other riders saying the cb190 series having an unreliable engine.

[@zackjacob2592]

Total cost ada chance $1000 plus. Aku tukar clutch housing honda cb190 kat fahmoto je dah $400 plus. Good luck Zar

[@muhdukasyah6388]

alamak don’t fight lah

[@izecubez]

Its ok Zar, upgrade when the time comes. This bike even if you scrap or sell, you will still have the memories.. China bike, still can reach all over Thailand, while some class 2 bikes dont even dare to cross borders..

[@AzraeiSY]

Can sense the tension between Zar and Farhan in the comments. Look, you guys have been wonderful for the SG bike community with your vlogs and videos and because of your work, tons of knowledge were picked up by newbie and experienced riders alike, myself included. I can understand from Zar's POV why he might be a tad upset its being called a China bike and not to mention the financial aspect of overhauling so its understandable. But at the same time I can also understand Farhan's POV in trying to spread as much information about the reliability of the CB190 series engine, solely from a informative/content perspective. At the end of the day, you know the saying, if its gonna happen, it will happen. Bende kalau nak jadi, akan terjadi, regardless of the brand/engine. Money can be earned back, but lives can't so I'm glad that everyone is safe and sound. Hope you guys can put this incident behind you and we are looking forward to more videos/vlogs with from the both of you! :)

[@JH-in1gv]

Farhan can be mindful with his words sometimes, considering he is the go to person for reviews

[@pixelgunboy7244]

Oh gosh, the thing all drivers/riders fear most ..............Engine Overhaul. Wishing U All The Best Zar!

[@TheFinrod81]

Thanx to Farhan, Zar and Fahmoto, this video teaches me a lot of new stuff about engine parts. Zar, hope your bike will be ok soon. Looking forward to your new 2A ride, me will retake at CDC soon. Will look forward to pay a visit to Fahmoto soon.

[@RubberTyres]

Glad to see the towing uncle still around. He towed my bike back when I had my fall at pasir gudang. Good that Fahmoto gives insights on what they do when overhaul engine. I noticed that it's a manual timing chain tensioner. I got bad experiences with those tensioners and generally use the OEM auto tensioner but change often.

[@D.Ronoa69]

This might be my go to shop next time if i need servicing! Seeing they know how to service the CB190 engine gives me a peace of mind.

[@ashraffhalid]

All the best bro... salute to all mechanics out there. Look forward to the overhaul journey. Thanks for sharing with us boiz

[@6Sambora]

Bro, your camera every time out of focus when you're trying to focus on the detailed parts😂

[@bytemegga]

this just brings back all the bad memories when my bike had to do top overhaul. similar issues with the timing chain guide breaking off, scratches in the chamber with the piston head. rather this bike than class 2 bike 🥲

[@smvd01]

Part 2 part 2 part 2! Cannot wait for next informative video!

[@Kittyfans-892]

this happen to me also.. at night after my night class, if u heard timing chain break, get ready towing and top overhaul. I ask mechanic to change everything inside even they said some still can used 50%. since u gonna do it haul. I change piston, valve. rings and so on. Close to $900 in total. that coil also, usually the coil is fine, but the wire attached to it faulty, the wire never sell individually, it came as a set so abt $120 for it... total for me..

[@brucelee3835]

can I put a big bore kit into the cbr190?

[@lol-vn5ro]

EHHH I SAW THIS PROTON ARENA TRUCK WHEN I WENT BACK FROM JB IN THE SG CUSTOM ON SUNDAY!!

[@tambakoverlanders]

Hahahahaa. guess he regularly makes trips thru and fro into SG!!

[@spencerthong478]

Awesome video and informative! Just a suggestion that might up your video production even more, would be a slightly wider lens!

[@ladysm]

nice video. cool to see the inside of an engine. Zar really whack his bike sia, piston and valve both damaged

[@TheRocketsciencee]

Standard laa break down.. china European Japanese sure will game one someday

[@turbolenza35]

is the CB150X more better?

[@tambakoverlanders]

Yes. Its better than the 190 series

[@x3ARMANI]

All the best zar. Hope for the best InsyAllah everything will go smoothly. Waiting for you to come back to hit the road 💪

[@ahmadyusoff352444]

At the end of the day, as long as the Rider is safe, that's all that matters.

[@oyeearvin2236]

I wrote this bike for 2 years and sold it off. I did a overhaul just after one year . After a year I can sense that's some issues again . Have problem with the cam chain .. I realise this bike have some issues to be honest . End up I traded this bike for another . Just sharing

[@johnmajor9265]

Zar, just wondering do you change your engine oil often? I also heard a mechanic says the e.o must be at 1.2 litres not 1 litre. I riding cb190r too.

[@zackjacob2592]

I ride cb190r and use it for delivery. I usually only use 1 litre full synthetic E.O. i do change it regularly as well once every 2-3 weeks or every 1500-2000km. So far when i check dipstick 1litre engine oil like good enough you can try checking your dipstick

[@cai11tube]

More reason for Zar to pass 2A soon so can upgrade to a 2A bike!

[@dreamstrue9332]

I think he already pass ? No ? The last time met him at ssdc is like 2 , 3 months ago , I guess he already pass

[@zaronthemove9549]

@@dreamstrue9332 my 2nd attempt for my 2A TP...20points, 1 immediate failure. Next one will be better.

[@dreamstrue9332]

@@zaronthemove9549 It's ok ,Jiayou brother 👍you'll geddit the next 1 🤟

[@sammerino9259]

Might as well buy new engine in jb and ask the mechanic to insert the old engine number to the new engine…..

[@TheSuperHandsome]

Sohai only use adjustable tensioner

[@shazali1306]

Does anyone has the owners manual? Also, I am clueless on how to reset the meter

[@zaronthemove9549]

Flick the ON n OFF light switch five times

[@Bashirachakzai]

I have the same bike

[@Bashirachakzai]

I have the same bike Very noisy

[@muhdukasyah6388]

ahahah siala zar tido eh 14:43

[@zaronthemove9549]

Orang baru balik keje malam lah... Pastu malam tu kerja lagi.

[@XenolVlatriX]

the camera work rabak, just a feedback

[@tambakoverlanders]

Old video bro. Newer recent ones improved a lot

[@XenolVlatriX]

@@tambakoverlanders awesome, just started watching your videos very informative

[@burgman7682]

One thing small bike engine can't last long. Big bike engine so far can last longer time

[@zaronthemove9549]

I beg to differ. This is a documentary on Discovery channel about the greatest motorcycle. Honda Cub takes the 1st place. kzbin.info/www/bejne/ipDFpIWphrOae7s My old vespa could last another 30 -40 years had it not been totaled in an accident. My only regret is that i did not takeout the engine after the accident...damn.. i could sell it off for like RM3000 - RM4000.

[@jeffer8762]

kudos to the mechanic la, can tear down engine...

[@zvlhelme]

many mechanics warned of the dangerous cb190

[@fadzileff5121]

Fah moto 👍👍

[@manpreetsinghsidhu5031]

Zar time to get the new Aprilla Scooter 🤔

[@thomashaverford4073]

Sian bodoh lah .... These things happen, especially for daily-driver rides like Zar's bike. Hope the repair costs not too bad & the CB190X comes back good as new :)

[@nasirmohamed9966]

Part and parcel of owning a bike…

[@RunLiveSG]

Adoi… major repair…

[@rozzlee79]

Engine made in china?

[@calbee8878]

Zar looks sad