Zeapon Pons PT | Setup and Operation (Part 2)

[@stephansmokov4952]

Hey Scott, thanks for the detailed review! Cheers

[@stllda909]

I read the reviews on Amazon. A few people said you can hear the motors running when you are recording. Is that true?

[@wojciechmaota-wojcik2565]

Hi Scott, thanks for great videos. What about noise during the motor operation? Is it audible? I would like to use this device during wildlife photography so I look for something as quiet as possible.

[@ScottDumas]

Thanks for watching :) It depends on the speed but at the lowest it's barely audible. The highest speed does make some sound but it's the same or quieter than most, if not all, other motorized sliders I've used.

[@D_L_J_83]

Hi Scott. Have they updated the firmware to be able to remove the pause in between multiple waypoints?

[@pjdfilmfoto8556]

Hi Scott, really enjoying your videos ... i bought the micro 2 plus with pan motor only, is it possible to buy the tilt separately ?, i cant find any

[@ScottDumas]

You should be able to... the pan and tilt motors are the same, just the tilt arm which is different. I can't find the tilt head by itself either though, I'll let them know and hope they can get it up on amazon or their website.

[@pjdfilmfoto8556]

@@ScottDumas Thanks for your reply bud, i managed to find a company that can supply ( UK ) `Cinegearpro limited` based in London, so i have now made the purchase, perhaps this issue could be highlighted in a new video for you... Regards ... PJD FILM & FOTO

[@pepsico815]

Will it work fine with an ultra-light setup like the RX100M7? Thanks

[@RodrigoSilvaFilms]

Do you recommend using this with a Blackmagic Pocket 6k Pro camera with a cage?

[@ScottDumas]

I haven't tried it specifically so can't be sure but it's pretty strong so weight shouldn't be a problem. Not sure if the wider body would be an issue or not, like sometimes on gimbals.

[@timelapsescapes]

I am trying to find if this system from zeapon works with the Z9 and I cant get a response for zeapon

[@farwestgarohills3831]

#Scott Dumas ! WHY MY APPS and BLUETOOTH does not connect the HEADS? I have no slider; I'll buy soon. WHAT MIGHT BE THE PROBLEM?

[@michaelrmarak5597]

Hi #Scott Dumas ! Will you please give the download link for PONS PT firmware update?

[@klugblogger-mitsharyreeves8229]

thanks for the video acutally like your accent... ;D

[@rushtik4490]

I thought this is a modular gimbal!

[@konstapelwalander]

It's a great introduction video, but I don't agree with the balancing. This is a robust system that doesn't have PID controllers, you should aim to minimize parallax not minimize imbalance. Cheers

[@ScottDumas]

That's a good point, however I was going by what Zeapon themselves recommend, at least to the best of my understanding.