Zero export for Deye 3phase on-grid inverter with energy meter

It tells how to use energy to realize zero-export function with CHNT energy meter

[@christinakbesford]

Hello is this included in the box of the inverter Deye Inverter Sun 5k g or does it have to be purchased separately?

[@teepisutt]

Ain't 1 4 7 supposed to be grid side and3 6 9 is the Load side?

[@manjyotb]

Hello, is it possible to daisy chain 2 x Deye Inverters to 1 Chint DTSU666 Meter on RS485?

[@venceslavuzunov1370]

Hi, I have bought Eastron sdm630-mct but I cant make It to comunicate with DEYE SUN-10K-SG03LP3. The meter is not bought by DEYE distributor. What setting I have to do. Address 001,baud 96k, stop bit 1, ct2 and CT rate are adjusted for 100/5a.

[@Konrad016pl]

Unfortunately, my Deye 12kw inverter goes crazy with this meter and the 0 to CT function does not work properly

[@julimobalmis5650]

I don't know if I have understood correctly, 1,4,7 and 10 is where the inverter should be connected and 3,6,8 and 10 is where the external electrical network of the street connection is connected?

[@DeyeInverter_official]

1, 4, 7, 10 are connected to load

[@johnmjk]

Do all 3 phase need to have equal load for this to work properly?

[@eduardklukas6904]

nein, mussen nicht.

[@DeyeInverter_official]

It can be unequal, but the output power of the inverter is equal to each phase

[@danielmoura3879]

Hello Sir, nice Video! Can the deye inverter work without Solar Panels and get couple with another inverter that work with the Panels?

[@DeyeInverter_official]

Hi, can't use without solar panel

[@renata3020]

Hello does this meter limit the supply of electricity to city networks?

[@DeyeInverter_official]

No restrictions

[@johnmjk]

Why did the inverter turn off when there was 7 amps load on B phase?

[@DeyeInverter_official]

Hello,Is your inverter B phase shut down when it exceeds 7A?

[@johnmjk]

No it does not

[@wandolaenergysystems4377]

can this work with schneider inverter?

[@DeyeInverter_official]

i don't know, better consult with them

[@Konrad016pl]

please record a video with the settings of this counter for deye 12kw. sometimes I have a counter error and I don't know why

[@stevenhack9329]

Hi can i use this meter with deye hybrid inverter to not export power to the grid model deye 20k

[@DeyeInverter_official]

Hi！The high-voltage hybrid inverter has a special matching meter, check the user manual for details

[@yilmazduzguncep]

Can you upload a monophase chint smart meter connection video?

[@mareksobol9845]

Where can i buy or how is call the Rs485 plug to connect meter?

[@DeyeInverter_official]

Hi,please contact [e-mail]

[@robsii1212]

Hi can this smart meter work with Huawei inverter SUN2000-3-10KTL-M1?

[@DeyeInverter_official]

Hi can't

[@Voroninvs]

what is the difference between CT and Meter. To limit Zero cell. And i need Meter for Deye 12 kWt hybrid inverter ?

[@eduardklukas6904]

CT reicht um die Nulleinspeisung zu realisieren, wenn die WR die nötige Eingänge hat. Der Deye hat die Eingänge. SM liefert noch andere Werte wie Cos Pi usw. und wird über RS485 mit dem WR verbunden. Vorausgesetzt der WR ist On Grid, Grid Tie fähig und unterstützt die Nulleinspeisung.

[@Voroninvs]

@@eduardklukas6904 Dankeschön

[@sorinblaga5981]

Nice presentation, I have a 6 kW Deye inverter equipped with a Eastron smart meter.....but I can't set zero export power to grid.... during a normal day I still export more than 5 kW... that is not good... Can you tell me what do I have to do for it? It's about Eastron SDM230 Thanks

[@shaazy]

I'm getting exactly the same with Growatt inverter and Eastron. Tried everything and still exporting 20 kwh daily!

[@ShadabKhan-ev5ps]

Hello Sir This Inverter is capable with DG sync if yes how to settings

[@DeyeInverter_official]

The inverter needs to be updated to the latest software version, and the DG option will appear, and then connect the meter separately to turn on DG

[@andyouno6785]

​@@DeyeInverter_officialHow to update to the latest software version?

[@mhmadnaisa9466]

I m work with eastron sdm630mct

[@DeyeInverter_official]

you can

[@kenmattventures9251]

Your connection diagram is different from the manual diagram. Why