【製品紹介】DYTAC/OMG AR FOLDING STOCK ADAPTOR for TM MWS/VFC Installation Guide (ft.DEVILSIX)【取り付け方法解説】

[@John_Click]

Even though I don't understand anything in the text, the video is very satisfying to watch 💯

[@TacticalAshiGaramiTV]

This is a product that I am very interested in for my own mws. Thank you so much for this video. ❤😊

[@chrisbills9997]

I'm so jealous of your guns 😫

[@Tubbsmahn]

Firstly, I love your build. Its gorgeous and clean. Just needs a proper Surefire m640u or m340u. Also, well it's been about a year and I was wondering about the longevity of its use. How has the OMG "Law Tactical" folder held up from the abuse? Has there been any issues with it that is a fuss to resolve?

[@milspec_mojyo]

Thanks but I love to use X300 series to long guns too. and also I already has those lights but I choose this X300V so I don't need to change ofcourse lower reciever’s longevity will be shorter. especially If you snap back your stock frequently like this demo The adapter seems durable but It‘s a Airsoft only replica so If you really worry about it, I recommend to buy real one (or change the stock lower to forged one)

[@TheMcMillan716]

what other upgrades do you have on your mws?

[@milspec_mojyo]

PWS Type brake BCM Magnesium alloy KMR13 KAC Keymod Rail Panels PTS Unity Tactical Fusion Mount Surefire X300V Surefire SR07 Larue Type Rail Cover Clip Eo-Tech EXPS3-0 KAC Type 600m Rear Sight ZN-Gear Simunition FOF Type Bolt Carrier(Stock TM Bolt base) BCM QD End Plate BCM Trigger Guard BCM Gunfighter Grip Mod3 Angrygun Troy Ambi Mag Release BCM Gunfighter Stock Mod0 Oniwaban Steel Buffer

[@Fcy379]

Nice setup, have you run into any difficulties with the folding stock adopter? How’s the performance when you shoot it.

[@milspec_mojyo]

Thanks for asking. here‘s my thoughts of performance with the adapter. ・Stock TM Bolt with stock TM Buffer(no modification to Bolt) ー It need to taped on buffer(like in this video) but very well cycle. but little less smoother than without adapter. ・Stock TM Bolt with steel buffer for TM(Non modded bolt)ー same as Stock/Stock one. ・Iron Aluminum bolt with Stock TM buffer(Non moded bolt)ー cycle more than Stock/Stock (because it‘s lightweight bolt...You know) Iron Aluminum Bolt with Stock TM buffer (Modded Bolt)ー more smoother than any setup and cycle very well. This is my recommended setup. first, the Bolt mod(sand down like dent underneath the Bolt same as the Bolt end which is included this kit) is very easy to do but It‘s not absolutely necessary. If you want more smoother, You should try this mod. and second is this adapter makes longer buffer travel, so It makes diminish the cycle speed. If you want more faster cycle, You should replace more harder buffer spring like 110 or 120% spring.(maybe no need for this to lightweight bolt like Aluminum bolts)

[@Fcy379]

@@milspec_mojyo thank you for your detailed answer. Im building a mws from scratch so I’ve been doing research on what bolt and buffer to match with the folding stock adopter. Your videos and comments actually helped me a lot, I’d go with your recommended setup.

[@Crimsonbraids]

I imagine it doesn’t work if the stock is folded? I’m new to mws, what does this hinge provide? Just for storage?

[@milspec_mojyo]

Yes it doesn't work when the stock folded. And yes It‘s for storage but also look more badass😎

[@Crimsonbraids]

@@milspec_mojyo hahahah I was looking for it for that reason 🤣 but 100$… 🥶🤣

[@katzenaxel]

the pin at 6:19 just fall straight through it for me, what do i do?

[@milspec_mojyo]

In that case, Maybe you should do install the buffer tube first. (7:10〜7:40)

[@katzenaxel]

@@milspec_mojyo i made it work, but thanks for the fast supply, i appreciate it

[@galteeboy84]

Thanks for vid. Very helpful.What type buffer is that with the flat face?

[@milspec_mojyo]

Silver one is “Oniwaban steel Buffer” for mws and black one is stock TM Buffer(little thin to use in real size buffer tube, so taped up)

[@オーシア連邦]

カッコイイパーツですね~。 ところで、バラクラバってどこのやつを使っていらっしゃるのでしょうか？宜しければ教えていただきたいです

[@milspec_mojyo]

Platatacのです。

[@オーシア連邦]

@@milspec_mojyo ありがとうございます。

[@Whitecell_]

What's the material of your simunition bolt? It sounds so dang' good

[@milspec_mojyo]

It‘s made from stock TM Bolt. More info for other videos on my channel！

[@Whitecell_]

@@milspec_mojyo may I ask you what buffer tube do you use?

[@Slaughter619]

No modification needed for the bolt? The instructions say to file a channel to match the new end piece, is that not needed?

[@milspec_mojyo]

No need to modify the bolt. but it‘s better modify thr bolt if you want more smoother operation.

[@Jay864]

Thanks a lot - where can you get the blue simunition bolt?

[@milspec_mojyo]

I made this Simunition bolt and you can buy from me(ZN Gear). But doesn't support international shipping.

[@shihhu_phileVods]

Can I use it with the MARUI MTR-16?

[@milspec_mojyo]

Yes you can use it

[@Mrat0n]

It will be modify bolt or not ? Install and ready to use right?

[@milspec_mojyo]

No prob with stock bolt.

[@nensjsjejjejejejwjwwjwjsjs3005]

I was thinking of buying one but its made from the same shitty metal that dytac uses to make their mounts

[@milspec_mojyo]

Yeah sometimes Dytac produces shitty products. But this Folding Adaptor kit is solid quality I thinik:)

[@ViVi-lc7ei]

このモデルガンなんて言う名前だっけ？

[@milspec_mojyo]

TM MWS

[@dantae2454]

Can we install it on an aeg?

[@milspec_mojyo]

This is GBBR only. You better to buy AEG compatible folding stock adaptor from other manufactures for some reasons.

[@dantae2454]

@@milspec_mojyo thanks mate I appreciate that. Do you perhaps know a model which is compatible with an aeg?

[@milspec_mojyo]

I dunno but maybe I saw it on aliexpress or wish.

[@dantae2454]

@@milspec_mojyo alright cool! Thanks mate! Luv ur videos btw! Keep going

[@DEVGRU-hr3gs]

MTR16にも取り付け可能でしょうか…?

[@milspec_mojyo]

東京マルイのガスM4シリーズなら取り付け可能です

[@DEVGRU-hr3gs]

@@milspec_mojyo ありがとうございます！

[@gottablast9279]

My button doesnt lock in when i close it wtf