Zhiyun Crane-M2 S | Complete beginners Guide - Start Here | Tutorial

[@tracyharris4302]

Thanks!

[@MamoAir]

Hi Tracy. Thanks so much. This is the first tip I receive on my channel Ever, after millions of views on my videos and tutorials. Much appreciated. I hope I could help. Subscribe also and join my community

[@CreativeCriminalsBangalore]

Out of 100 reviews i watched so far, not one dimwit cared to mention the portrait mode. Thank you so much, brother. More power to you

[@MamoAir]

Ha, good to hear that! Hope I could help, Thanks for stopping by. Subscribe for more. Ciao

[@thedecorlifestylecenter4853]

My ms2 left axle is upside down...meaning it can be read...what to do?

[@adamw1944]

In my opinion, this is one of the best tutorials available. Plain English and clear language. Bravo.

[@MamoAir]

Thanks again. Glad to hear my english is not too bad. Ciao

[@Travels_of_Chicho]

The most complete installation and balancing tutorials, better than the official tutorials!! I had to subscribe!

[@MamoAir]

Thanks. Glad you enjoyed the video. Stay tuned.. Ciao

[@IAmXjazzx]

That's a great tutorial! Always better when there's someone demonstrating the operation of a gimbal for you instead of reading a manual. Can't wait to get mine too!

[@MamoAir]

Hello Xavier, thanks for the comment, hope the video helped. Please do join my community and subscribe for weekly videos and tutorials. Join me also on my website for online video making courses and merchandise at www.mamoair.com

[@singslychung9129]

Absolutely blown away by the footage with background music This is another level review video. Goosebumps on every spectacular shot

[@MamoAir]

Hello Justin, thanks for the comment, hope the video helped. Please do join my community and subscribe for weekly videos and tutorials. Join me also on my website for online video making courses and merchandise at www.mamoair.com

[@TonysMTB]

I don't even own one yet but I watched the entire video. You did a great job explaining things. Thank you

[@MamoAir]

Ahah. Nice one Tony. Thanks for watching. Stay tuned for more

[@codewithdipeshrai]

This is the best tutorial which I have came across. Thank you for this great tutorial.

[@MamoAir]

Hi there. Thanks for the message. Glad I could help. Subscribe and join my community. Ciao

[@ryanwang2553]

Very educational video. I am impressed by the universal quick release plate design which avoids a lot of inconvenience when shooting.

[@MamoAir]

Hello Ryan, thanks for the comment, hope the video helped. Please do join my community and subscribe for weekly videos and tutorials. Join me also on my website for online video making courses and merchandise at www.mamoair.com

[@ramasolaaurora6667]

we actually need lots of this gimbal, Crane M2s, super gimbal, wanna try! ♥

[@MamoAir]

Hello Aurora, thanks for the comment, hope the video helped. Please do join my community and subscribe for weekly videos and tutorials. Join me also on my website for online video making courses and merchandise at www.mamoair.com

[@junechung1572]

Thank you very much for your detailed tutorial video. I just ordered one, and as a beginner, that's exactly what I need at present.

[@MamoAir]

Hello Clarisse, thanks for the comment, hope the video helped. Please do join my community and subscribe for weekly videos and tutorials. Join me also on my website for online video making courses and merchandise at www.mamoair.com

[@cinematictrax8443]

I am looking to purchase this gimbal; I currently have the M2 which I find extremely frustrating having to balance it every time I take it out of transport to use. How do you find the M2S in this regard. TIA

[@etienneaubert3972]

The GO mode is the same than F mode, but with faster parameters for the rotations. It’s more instant, and is supposed to be used when you want to film faster actions.

[@MamoAir]

Thanks for the feedback!

[@dimakor5914]

Much better than reading the manual, thanks.

[@MamoAir]

Thanks Dima. Hope I could help. Hit subscribe and support my channel then. Ciao

[@ArmandRoseTV]

This is an excellent walkthrough. It helped a lot. Now if I will switch between devices I will have to rebalance each time?

[@MamoAir]

Hello. Thanks. Yes you will have to rebalance everytine you hange device. Hope the video helped. Subscribe for more. Ciao

[@GoWithChris]

Thanks for the help! you are the only one on KZbin that actually have a tutorial that make sense.

[@MamoAir]

Ahah thanks for the message. I am glad I could help. Hit subscribe and join my community for more. Ciao

[@GoWithChris]

@MamoAirofficialpage this seems sus. too good to be true

[@vahiphotography]

It was a detailed video like a Crane M2 S have demo video, to share with every new buyer😅. Thank you so much i was searching for video like this...🙌

[@MamoAir]

Hello. Glad I could help. Hit subscribe for more tips videos. Ciao

[@tulankantesariaphotography5479]

Thank you for doing this with gopro. . i just got the crane m2s and i will be using gopro 10 as well... hope it works out as i have tough time balancing all the gimbals all the time.

[@MamoAir]

Thanks for watching. Subscribe for more. Ciao

[@MrAlppiah]

Thanks for the great guide; my question is whether the gimbal can charge the camera's battery or not.

[@MamoAir]

Hello. Sorry I do not have this gimbal with me anymore and I cannot remember. May be someone else can answer your question. Hit subscribe for more videos and join my community. Ciao

[@attiladerwaldschrat5375]

The very best guide, I´ve seen on YT! Many thanks for it! Dumbs up and subscribed. Greetings from Germany, Attila

[@MamoAir]

Hello Attila. Awesome name! Thanks for the comment and subscription. Stay tuned

[@ElmoUchiha]

I love you thank you so much I needed help with the quick release plate

[@MamoAir]

Hello. Glad I could help. Subscribe and join my community. Ciao

[@MiasPassport]

Love this video! Im just wondering, if are you done setting it up, you dont need to do it anymore? And how do you put something like this in your bag, wont it break?

[@MamoAir]

Hi. Glad I could help. You will have to adjust the gimbal more or less everytime, yes. Especially if you fold it in its default position. You can simply put the gimbal in a bag ir biy a case. Subscribe and join my community. Ciao

[@banglians]

its good information thanks..iam a new beginer....

[@MamoAir]

Great, hope I could help. Subscribe to join my community and for more videos. Ciao

[@banglians]

@@MamoAir well done..thanks for replay...give more tutorial please

[@WatchMysh]

Thank you for the guide! So... Is it possible to let the camera do a slow pan of like 20 degrees from left to right while recording a video instead of photos like you've shown while explaining the timelapse mode?

[@MDC9000mtl]

Thank you! The original video from Zhiyun is alot harder to follow on balancing. This was a great beginners guide plus details on the app and everything to do with this device. Thank you for your help and time. Now to have fun with the gimbal 🤜🤛

[@MamoAir]

Hi. Glad I could help. Subscribe for more and join my community. Ciao

[@bethlee969]

That's really an informative and detailed tutorial for beginners like me. Once I get one for my a6500 I'll follow the steps you taught to make the most out of the gimbal. So excited!

[@MamoAir]

Hello Beth, thanks for the comment, hope the video helped. Please do join my community and subscribe for weekly videos and tutorials. Join me also on my website for online video making courses and merchandise at www.mamoair.com

[@marklee7181]

Thank you for your nice introduction and can’t wait to buy one

[@MamoAir]

Hello Mark, thanks for the comment, hope the video helped. Please do join my community and subscribe for weekly videos and tutorials. Join me also on my website for online video making courses and merchandise at www.mamoair.com

[@STREETFOODJOURNEY5]

hi, i just bought this gimbal, but why after few minutes of using it, it suddenly stop responding because it said " axis locked" i have no idea what it is

[@MamoAir]

Hi. Thanks for the message. That means that you have some of the locks on the gimbal still "locked". Make sure they are all loose. I explain that in the video at 02:10

[@STREETFOODJOURNEY5]

@@MamoAir hi, thanks for the response, i think i got the defect one, all have been unlocked, the gimbal keep spinning around non stop, i could not even enter the menu. i have sent it to where i bought and they niw try to fix it 😅

[@MamoAir]

I see. Nice one

[@STREETFOODJOURNEY5]

hi bro, just quick update, my unit has been repaired, it took them 10 days to repair it, but when its done i refused to bring it home, i aint got no time for that, so they decided to replace it with brand new, but after 1 week of using it, i face the same exact problem, the gimbal keep spinning to the right eventho i didnt press anything, now i can comfirm that these product is absolutely trash, sorry, i should have bought DJI instead

[@MamoAir]

Thanks for the update dude. Sad to hear you had a bad experience. Mine works fine. Stay tuned

[@FrankFang1025]

Nice review, The first video that dives deep into the App functions, very informative.

[@MamoAir]

Hi Frank. Thanks for the comment, hope the video was helpful. Join my community and subscribe for weekly content

[@DungarooTV]

Very well explained and easy to follow. Many thanks. Just wondering how to do a firmware upgrade?

[@MamoAir]

Hi, thanks for watching. I do not have this item any longer and cannot answer your question, sorry. Hit subscribe for more videos and join my community. Ciao

[@tentipiwildcamping]

Great tutorial 👍🏻 I have a question, can you mount the iphone with the lens near the axis motor with a ND filter on without and obstruction of the image ? I want the lightening port on the left to connect my rode wireless go. I have an iphone 13 pro max

[@khalidahalex4562]

Very detailed operation, could i use my Iphone on M2S ?

[@MamoAir]

Hi there. Thanks for watching. Glad you enjoyed the review. Yes, as shown in the video, I used an Iphone 13 pro. Hope this helps. Join my community and subscribe for more weekly content. Ciao

[@chalee62]

I just got mine a few days ago, this video was helpful. I have a canon m50 with the 11-22mm lens, its a heavier set up and I will have to keep playing with it to get it to function the way I want it to. Seems the potential is there by my lens may be just to heavy for it to do to much, I want to use my wider lens for vlogging

[@MamoAir]

Hello. Glad I could help. Hit subscribe then and join my community. Ciao

[@thevijayraj34]

You got patience. Thanks for sharing this tutorial 😁.

[@MamoAir]

Thanks for watching

[@thevijayraj34]

@@MamoAir Hi Mamo, I tried to charge my GoPro 11 using the gimbal's upper USB type-c port. I kept it for ½hr but it never increased a single % and also got heated up. Do you know why it's happening?

[@MYTRAVELIKE]

zhiyun M2 is really cool,, very small, easy to carry everywhere, perfect for traveling

[@MamoAir]

Hello. Yes, I agree. These gimbals are so portable. Hot subscribe and join my channel for more videos. Ciao

[@MYTRAVELIKE]

@@MamoAir oke join

[@cinematictrax8443]

I am looking to purchase this gimbal; I currently have the M2 which I find extremely frustrating having to balance it every time I take it out of transport to use. How do you find the M2S in this regard. TIA

[@freyasmiths1054]

Wow, the video is so detailed and well- explained, good job! Thanks god Zhiyun finally added much more features in the zy play app, makes it easier for beginners to operate their gimbals. I do have a M2 on hand, it seems like they make a huge upgrade, it will be interesting if you can make a comparison video between the two~

[@MamoAir]

Hi Freya, thanks for the message. Glad you found the video helpful...and yes, the comparison video with the Crane M2 is coming soon 😉. Subscribe to my channel and stay updated with the notifications! Ciao

[@CallumJones1]

I have a Sony a7iii with a 28-70mm lens and no matter what I do I can't get it balanced like you do with the GoPro, it just falls to the side

[@MamoAir]

Thanks for watching. Sorry to hear you cannot balance your camera. If you enjoyed the video though, hit susbcribe and join my community. Ciao

[@gaetanproductions]

what a great video, thanks for you explanations

[@MamoAir]

Thanks. hope I could help. Subscribe and join my communitu. Ciao

[@Rajaspeeaks]

Very nice teaching👌

[@MamoAir]

Hello Frank. Thanks, I hope I could help. Hit subacribe and join my community. Ciao

[@socialtipsbysamantha]

This was so helpful!!! Thank you!!!

[@MamoAir]

Hello Samantha. Glad I could help. Subscribe and join my community. Ciao

[@cristofonline]

Thank you so much for such a detailed explanation!

[@MamoAir]

Hi there, hope it helped. Subscribe for more. Ciao

[@larissastan5051]

Great video! I was wondering if you could post some tutorial videos later on, including how to use stabilizers to transition the lens and so on? I really like this stabilizer and your video convinced me that I have to buy it!

[@MamoAir]

Thanks for the comment!

[@cinematictrax8443]

I am looking to purchase this gimbal; I currently have the M2 which I find extremely frustrating having to balance it every time I take it out of transport to use. How do you find the M2S in this regard. TIA

[@rewez]

Thanks for the detailed tutorial! Just received my M2S today and I love how compact it is. I used to own a Feiyu G6 Plus for my Sony A6000 and I think the M2S is a far superior gimbal and it's cheaper too. I would say the only drawback is that it lacks wifi , unlike the previous M2 model. So, the only way to use the record button on the gimbal is through a cable, which is rather cumbersome. Overall, I still like it!

[@MamoAir]

Hi and thanks for the comment. Hit subscribe and join my community. Ciao

[@ZtudioEarl]

can you connect the a6000 to the m2s via cable connection?

[@rewez]

@@ZtudioEarl Sorry for the late reply. Yes, you can connect via cable and use the record button on your gimbal but you need to change your camera firmware, which is super easy. Tutorial for that is here : kzbin.info/www/bejne/eKfYe4uIgd15i8U

[@juliaherzsprungfotografie]

Perfect. Very understandable. Thank you😊

[@MamoAir]

Hi Julia. Thanks. I hope I could help. Subscribe and join my community

[@Deeriox]

It's a GREAT and very comprehensive video. Unfortunately, there's a BUT. @Mamo Air - regarding 27:01 ->> can you provide a full video tutorial with all the steps on how to re-calibrate Crane M2S using the six-side calibration? My gimbal was actually perfectly calibrated out of the box and then I followed your advise, did the six-side calibration and now it's strangely tilted, which makes it unusable. I am quite worried what to do about this, because I only realized after the fact that, contrary to the video's suggestion, there's no need to do the re-calibration if the position levels are correct. Now my gimbal doesn't work and I don't know what to do. I spent many hours and many re-calibration attempts but apparently I am somehow positioning the gimbal wrongly, because it results in mis-aligned levels. It all worked fine before I did the 'six-side calibration'. I will be very grateful for a full video on how to calibrate it. The APP photos don't provide sufficiently clear instructions.

[@BlondVlogs]

I am having this same problem. Did you fix it and how did you do it?

[@darianwawer]

@@BlondVlogs Yes, I fixed it (info below). Ok, so - you are NOT supposed to calibrate the gimbal at all, unless you notice specific problems. All gimbals are properly pre-calibrated and the vast majority of the time will work perfectly fine straight out of the box (that's the official information from the manufacturer). HOW TO FIX IT: There's no official English video, but on the Chinese website of Zhiyun there's a proper instructional video: www.zhiyun-tech.com/cn/service/support/587/3/show?type=website&page=second_nav&source=service2#/pages/index/support/videoPage Specifically video named CRANE-M2 S 六面校准教程 (this is the second video from the bottom). What you will need is a moderately tall, sturdy box in order to perform proper calibration. They tell you which part is the one that you should actually pay attention to and how to position it correctly at each stage. I am sure it will be much easier to do it with this video. Good luck!

[@MamoAir]

👍

[@nanomiya790]

i just purchased this gimbal and alreay using it for a week for a walk or strolling around only. but i kinda dissapoint with the result because its a lil bumpsy ( its not as smooth as i expected) do you also have the same result.

[@MamoAir]

👍

[@CK-qs9vr]

Dude, you basically explain everything on point in this video. The zy play App looks super easy to use. It is quite user-friendly for beginners. Would you make a comparison video to M2 and M2S? It must be a lot of fun!

[@MamoAir]

Thanks C K, I hope the video helpes. The comparison video you ask for will come soon 😉

[@majormegapix]

Hello. I just purchased the Zhiyun Crane-M2 S to use with my DJI Action 3 cam and am watching your vid for instructions. I am using a TASCAM TM-2X Stereo XY Condenser Mic attached to the cam and cannot get to balance. Perhaps it causes the whole unit to be too top-heavy. I had figured if it could handle a full-size DSLR it could handle my setup. Any suggestions? Thanks

[@MamoAir]

Hello there. Yes, probably adding the microphone is making your setup too top heavy. You can either find a stronger gimbal or try to find a way to place the microphone on the body of the gimbal instead of the camera. Hope it helps. Subscribe and join my community. Ciao

[@majormegapix]

@@MamoAir Thanks, will do.

[@sonyandfimi8302]

Thank you very much friend, you have helped me a lot to join it to my new Sony ZV E10 with the 16-50, it works great, wonderful! Too bad I can't put the 18-105 mm. Greetings and thank you very much for your time friend ¡¡

[@MamoAir]

Hi guys. Thanks, glad I could help. Hit the subscribe button for more

[@justalexhimself]

great video - thanks! super helpful from another London based videographer ;)

[@MamoAir]

Ciao Alex. Glad you enjoyed the video. Hit subscribe then and join my community. ✊

[@sabitovilnur1]

Crane m2s vs M3! What is better in terms of stability and endurance, as well as pictures without motor jitter? Camera Sony ZV-E10 Lens Sigma 30mm 1.4

[@MamoAir]

Hi there. Thanks for the message. I would suggest the M3. I loved that gimbal and it might be a bit stronger than the m2s. I have a review of the m3 too on my channel. Hope this helps. Consider to subscribe for more. Ciao

[@The_Pilot192]

I have just ordered a Crane-M2 S and have a short question. If my camera does have an internal (optical) stabilizer, should I switch this one of or on while using the camera on the gimbal?

[@MamoAir]

Hello there. Thanks for the message. In my experience different cameras work differently in gimbals. Sometime I turn the stabilisation of the camera off while I use the gimbal as they try to compensate each other stabilisation and the image is quite artificial. Just experiment and test them yourself and compare the clips. That is the best advice I can give. Subscribe and join my community if you haven't already. Ciao

[@eliank410]

Great stuff, thank you for the video!

[@MamoAir]

Hello. Thanks for the feedback. Glad I could help. Subscribe and join my community. Ciao

[@donaldschaefer296]

Beautiful gimbal, Do you need to carry the phone when you go out also, or is it just at set up. Also can you do anything without the app, like just the basic functions, like the 4 modes?

[@MamoAir]

Hi Donald. Thanks for the message. You do not need to carry the phone always and the gimbal functions perfectly without the app, if you limit yourself to the basic modes. Hit subscribe for more and join my community. Ciao

[@donaldschaefer296]

@@MamoAir Thank you very much and I will sub.

[@marlinwoodruff2292]

perfect thank you for sharing, you covered everything I needed to learn.

[@MamoAir]

Thank you for watching. Hope I could help. Hit subscribe and join my community. Ciao

[@krane15]

That was a very good and consistent balancing explanation except for the last one that varies from person to person. Anyway, they should point out the limitation of many smartphones that will not balance vertically (tilt axis).

[@MamoAir]

Hello. Thanks for the feedback. Glad you enjoyed the video. Unfortunately I cannot cover everything in one video, I try to help as much as I can with my time. Subscribe for more. Ciao

[@leka9129]

Thank you! A very good video. You answered all my questions ❤️

[@MamoAir]

Hello. Glad I could help. Subscribe for more videos and tips then. Join my community. Ciao

[@ScottBowman]

Hi, great video, thank you! You mentioned a part required to attach a gopro to camera mount plate... did you have a link for that please? Cheers

[@MamoAir]

Hello, thanks for checking the video. You can find the link of the adapter in the description of this video. Go down to "My camera gear" and the first item is what you're looking for. Thanks. Consider to subscribe for more

[@MaverickMahesh]

if we connect the external mic then i think it would affect the stabilisation... correct me if im wrong..

[@ricardomarcos3471]

Which gimbal would you recommend for using the Sony A7C with the Sony 20mm f/1.8 G lens? The M3 or the M2S?

[@MamoAir]

Hello Ricardo. Thanks for the comment. Honestly I loved the M3. I think the design was cooler and I loved the audio interface to which you can connect a microphone directly. In a way I found it even more versatile than the M2S. I have made a video also on the M3, here on my channel. Hope it helps. Hit the subscribe button and join my community. Ciao

[@AkshayTravelFilms2]

Great video, Can we do object tracking with this?

[@MamoAir]

Hello. Sorry I cannot remember about object tracking

[@guy-laurentmarie7756]

Hello. Thank you for your tutorial. One question... is there the face-tracking function in the app ?

[@LengLynn]

if you use crane M series, face-tracking function can not be used, but if you use other model of zhiyun crane, you can use face-tracking function

[@MehmetAliBoran]

Hello! I have just bought this gimbal and when I connect it with my camera, my camera only stay USB mode. How can I start to play?

[@ranadias20]

Hey thanks for this intro. Very helpful. Does it support Sony RX10 Mark III pls?

[@MamoAir]

Hi. Thanks for the comment. Please check the zhiyun website for cameras compatibility. Meanwhile hot subscribe and join my community. Ciao

[@cesarzamu]

Congratz. Fully complete. Nice.

[@MamoAir]

Hello Cesar. Thanks for the message, hope the video helped. Hit subscribe for more. Ciao

[@cesarzamu]

@@MamoAir it helped a lot, but the gimbal is nit doing the Vortex in my Sony Alpha6300 with a standard zoom Lens. Did it happend the same to you?

[@MamoAir]

@@cesarzamu I have not tried woth a zoom lens. I think it is too heavy for this gimbal

[@cesarzamu]

@@MamoAir it Works well. It takes feel how the gimbal works beetween axis and it take short while. Thx.

[@armandopiscitelli9864]

Hi Thank you for you really well done video. Do you think that M2S can work with the Sony A7Cr and a Sony 20-70 zoom? it is a 1100 grams set.

[@MamoAir]

Hello there. Thanks for the comment. I am not sure about your setup. I remember trying the gimbal with my 24-70 and could not handle it. You better send a message to the customer service. Hit subscribe and join my community. Ciao

[@armandopiscitelli9864]

Thank you so much!!! @@MamoAir

[@kiera969]

Hey, great video! Although, I'm having difficulty connecting my Sony zv1 to the gimbal. After balancing I used the usbc cable to connect the camera. When I turn on the gimbal the camera just says "check connected device" and does not function. Do you have any advice?

[@MamoAir]

Hi there. Thanks for the message. Glad you enjoyed the video. Unfortunatt I do not have the ZV1 so I cannot help. Subscribe for more videos. Ciao

[@Xtremeplayer63]

Great video! I have a question as I was not successful following your steps to connect my sony camera to this gimbal. I have an a7c which can only connect via type-c to type-c. On Zhiyum's website it says this camera is connectable via this method, but every time I connect it, my screen goes black and reads...."Check the connected device." My record button will not work because the camera and gimbal are just not wanted to connect. If you or anyone can help me fix this problem, I would be extremely grateful! Thanks in advance and please keep delivering your amazing content!

[@MamoAir]

Hello and thanks for watching the video. I never used that camera but make sure you set up the usb connection on the camera to "PC remote". Hope this helps. Ciao

[@thomasduane6863]

I even understood a lot of that. Thank You!

[@MamoAir]

Great. Thanks for watching. Hit subscribe for more. Ciao

[@Ganasmrithi]

Hello sir. Thanks for the useful video. I am facing a problem with m2s with gopro 12 on it. Evrn after balancing 3axis perfectly, as soon as i swieh on the gimbal it starts vibrating.. Please help me with the solution. Thank you

[@pedrocoll5455]

Nice review! 👏 does it work with a Blackmagic Pocket Cinema 4k?

[@MamoAir]

Hi Pedro. Thanks. Nope, it will not work with the BM4k, as that's the camera I usually use. You need to get a bigger gimbal for that. Consider to subscribe for more reviews then

[@pedrocoll5455]

@@MamoAir Hi! I just tried one with a Gopro. Is it normal to feel a little vibration? Thanks!

[@MamoAir]

@@pedrocoll5455 Hi Pedro, when it vibrates it either means that the Gopro is not properly balanced or the motors of the gimbal are set in "High" mode. As the Hero is a very light camera, the motors might be too powerful. Try to go In the settings on the gimbal and switch the "Motor's power" to Medium, or low. It might help. I get that too sometimes

[@pedrocoll5455]

@@MamoAir Ok thanks!👍 I’ll try it!

[@brajeshgoon1700]

I thought I am gonna buy it but after watching the tutorial how to mount and balance the gimbal I am not gonna buy this cuz it's giving me headaches by just watching it I dunno what I was gonna do if I really bought that ... Thanks mate

[@MamoAir]

Hello. Thanks for the message, 😃. It is not too hard to use once you do it a coupke of times. Subscribe for more and good luck with your filming. Ciao

[@brajeshgoon1700]

@@MamoAir is it really easy actually I want to start a KZbin channel for travel vlogging and I am confused which gimbal to buy please can you suggest

[@krane15]

Everything's hard until you get used to it. Remember leaning how to ride a bike, skateboard or drive a car? Once you get used to it, you'll balance it without a though. Although some gimbals ARE easier to balance than others.

[@MamoAir]

@@brajeshgoon1700 It is not an immediat ething. You need to understand it, of course, but everyone can use a gimbal, it just take a bit of practice. You'll be fine! 🙂

[@jaimemoux1284]

You are doing a great job

[@MamoAir]

Thanks Jaime. Appreciated. Hit the subscribe button and join my community then. Ciao

[@artsmodelstation9396]

Question: can you set it down and while your in front of it will it track your every movement ?

[@MamoAir]

Hello. Sorry I do not have this gimbal with me anymore and I cannot remember. May be someone else can answer your question. Hit subscribe for more videos and join my community. Ciao

[@Chinramsay]

Thank you so much! this is so helpful, & you're bloody amazing!🙏🏾🙏🏾🙌🏾 🙌🏾🙌🏾 could you plz do a video on how to balance it with sonyzv1 only if you have it? X

[@MamoAir]

Hello Chin. Thanks for checking the video, hope it helped. I do not own a ZV1 but you can balance it exactly in the same way I showed here with the gopro, nothing changes. Join my community and hit subscribe for more videos

[@Chinramsay]

@MamoAirofficialpage stop ripping people off on this platform. He worked hard to build his community, and find something to do with your life.

[@kennybreiden1079]

Hello, nice Video! I got a question tho, as soon as I want to use the Portrait Mode or the V Mode to have the Gimbal vertical, the Pan Axis Motor stops rotating and goes back to the original Position. Do you know why? Greetings

[@MamoAir]

Hello and thanks for watching. Hope the video helped. I am not sure why you are facing that issue. May be the phone is not properly balanced. I advice to get in touch with Zhiyun. Subscribe for more. Ciao

[@duna.filmes]

Will this crane handle a sony a6500 with metabones and canon 24 mm f1.4 lens?

[@MamoAir]

Hi. Thanks for checking the video. I cannot say for sure if the gimbal supports your kit as I never tried it with that camera. It sounds to me like it will but I recommend to check the Zhiyun website or send them an email. Hit subscribe and join my community. Ciao

[@ParanormalPopcorn]

On the APP that you told me to download ZY Play it doesn't have the M2 S Crane. What is wrong here?

[@kasparsbriedis5858]

Hi mate. I get my new crane m2s and use GoPro hero 8. I watch you video how to balance. You use GoPro hero 10. I am struggling GoPro 8 it can be problem because it is lighter. hard to find balance third point. Looks like it’s hold position but then move to the bottom it’s flip.

[@MamoAir]

Thanks for the feedback

[@kuyamicvlog14]

Great video sir

[@MamoAir]

Thank you very much

[@robertludlam272]

Excellent video thank you I have subscribed and will enjoy your work 😊

[@MamoAir]

Thank you. Glad you enjoyed the video. Stay tuned for more

[@robertludlam272]

@@MamoAir I am going to buy the M2S soon now that I know I can use all three of my devices ( canon m50, GoPro 10 and iPhone 11pro) with it so once again many thanks for your clear and concise video

[@MamoAir]

@@robertludlam272 nice, enjoy the gimbal

[@janastukert1537]

Hey I have a question. I’ve got a sony aplpha 6000 but the problem is that the stabilator is always showing me the “sleep mode” or something like that and my camera is not staying still at the top it’s always fallin down.

[@MamoAir]

Hi thanks for the message. If your gimbal is going to sleep kpde is usually because your camera is not properly balanced on the gimbal and the notors struggle too much. If you face problems you better contact Zhiyun support team. Subscribe for more. Ciao

[@ridwantravelvlog7492]

🇧🇩 from Bangladesh

[@MamoAir]

Hello!!

[@RrRr-rl9ic]

hello bro i hope you are very well, thanks for your video. I wanted to know if the crane m2s can be used directly without an extra accessory vertically for a cell phone? Thank you

[@MamoAir]

Hi there. Thanks for the question. I do not own this gimbals any longer and I cannot answer you correctly, sorry. Still, hit subscribe and join my community for more videos. Ciao

[@DungarooTV]

Is there a way to take photos with the gimbal? E.g. leave the camera on Photo mode and then switch to video on the flow or take photos with a separate buttom combo?

[@HellenLee-yz2oj]

It just support video control not support photo control.

[@DungarooTV]

@@HellenLee-yz2oj Many thanks - I wish it did as I can use it to take photos and videos - like a selfie stick.

[@katyaandgriffons]

Thank you very much! This video helped a lot!!!

[@MamoAir]

Hi Katya. Thanks for watching the video, hope it helped. Hit subscribe then and join my community. Ciao

[@testdriveph]

Hey there, saw that you have a fuji camera, have you tried with this gimbal? Ive found it difficult to balance, i have to push the horizontal middle part towards to left. what happens is the motors overheat after a while, especially when shooting outdoors and it simple conks out and goes to sleep mode. Also tried it on a xh2s, works fine after 15mins then the battery drains and it overheats. :(

[@MamoAir]

Hi. Sorry I do not have a Fuji camera...not sure where you have seen that lol

[@testdriveph]

Oh ok. Its on your thumbnail hehe, ty any way

[@MamoAir]

@@testdriveph oh right. It was my friend's then. Not mine

[@jaroslawplamowski2206]

Hi, you didn't mention if there is option to charge a camera from the gimbal. Is it work that way to ? :)

[@MamoAir]

Hi, thanks for watching. I do not have this item any longer and cannot answer your question, sorry. Hit subscribe for more videos and join my community. Ciao

[@diogokyrillos]

Thank you!!!

[@MamoAir]

Hello. Thanks for watching, I hope it helped. Hit the subscribe button then and join my community. Ciao

[@rexliu2334]

Thanks for your video! Can M2s hold iPhone 15 Pro Max with the cage and Moment anamorphic lens plus 67mm's ND filter? I like M2s since it is very lighter and mini but I just don't know if it can hold heavy added iPhone cage, please provide your professional opinion , Thanks so much!

[@MamoAir]

Hi there. Thank for the message. Unfortunately I have not tried the gimbal with your setup so I cannot confirm. But if the M2 can support my sony camera with a lens, I am pretty sure it will support your iphone. In any case, you can always send an email to the customer service and see what they reply. Hope it helps. Subscribe and join my community. ciao

[@rexliu2334]

Thanks much! @@MamoAir

[@rexliu2334]

I did subscribed @@MamoAir

[@AndrewOFeebluehen87]

Is there a remote control you can use for vlogging

[@MamoAir]

Hello there. Thanks for the message. I am not able to help regarding your question, sorry. You better get in touch with the brand to be sure. Subscribe for more videos. Ciao

[@laszlocsikos189]

Hello! After using the six side calibration through ZY pLay app, the gymbal is not leveling anymore. Its tilt left from my point of view. I am using mobilphone. How can i correct it? Should I go to motor menu and set custom? Or what? Any advice would be appreciate !

[@MamoAir]

Hello there. My suggestion would be to calibrate it again. Or in the app you should be able to correct the values manually. Unfortunately I do not have this gimbal anymore and cannot double check

[@ТехникаЕвгений]

hello, have you tried using Ulanzi BG-4, in my opinion it would be more convenient

[@MamoAir]

Thanks for the feedback. I never used that. Consider to subscribe for more videos, ciao

[@ТехникаЕвгений]

@@MamoAir I understand, okay, but I think that in principle this is possible

[@bora_ergin]

Thank you very much, great video 👌🏼

[@MamoAir]

Thanks for watching. Hope I could help. Subscribe for more and join my communitu. Ciao

[@emayen23]

Excellent video thanks for sharing

[@MamoAir]

Thanks Enrique

[@upinsmoke-tv]

ty for the vid , can i do face tracking with the app , also what is sync motion ,

[@MamoAir]

Hello. Sorry I cannot remember. Hit subscribe and join my community

[@dgreenspino]

I'll add to the grateful chorus. Especially since the printed manual is printed in a light grey, microscopic 5pt type, making it very uncomfortable to read. I do have a couple of questions... Most importantly, is there a way to control the sensitivity of the joystick? As it is the movements are abrupt and jerky. The app is worse. Second question is regarding a zhiyun crane m2s quick release plate. The one that comes with the MS2 has pointed wedge to fit into the locking mechanism. If I do a search, I don't see any pointed replacement plates. Only squared off ones. Ideally, it might be nice to have a couple of extras to set up multiple types of cameras quickly.

[@MamoAir]

Hello Dorian, thanks for checking the video, I hope it helped. Regarding the joystick,...I do not have the gimbal with me right now but I remember there is some settings in the menu, you should look there. About the extra plates, I recommend to get in touch with Zhiyun directly, they'll be happy to help. Thanks. Consider to subscribe. Ciao

[@dgreenspino]

Thanks for your quick reply. That's very kind of you. I checked the menu in the gimbal and in the advanced settings it appears as though there are options for control but they don't do anything. The Joystick option is useless:( ... I appreciate your suggestion of contacting them. I honestly didn't thing of that.

[@MamoAir]

@@dgreenspino Great, yes get in touch with Zhiyun. Stay tuned for more videos. Ciao

[@Htbaa]

Not sure what I'm doing wrong, but I can't get my Kandao Qoocam EGO 3D (which is as big as a GoPro) in a complete stable position with the gimbal turned off. It's like there's no resistance at all? I can get it stable in a neutral position (tripod out), but when moving the camera it won't stay in that position unlike what you showed. It does when the gimbal is turned on, so that's good. But again, there's no resistance when the gimbal is turned off.

[@chenlyn-cj8ve]

Did you try to do six-side calibration?

[@Htbaa]

@@chenlyn-cj8ve not sure what that’s supposed to do? I’m not talking about the powered on situation to be clear.

[@dlivanto]

Do you need to rebalance the gimbal everytime you take off the camera with the same lens?

[@MamoAir]

Ciao Daniel. Usually you do not have to rebalance the gimbal if you use the exact same gear and if you do not move the balanced arms of the gimbal. Once the gimbal is balance with the camera and lens, it should be ready to roll at any time. Minor adjustments must still be made sometimes though. Hit susbscribe and join my community. Ciao

[@MySkatefanatic]

Thanks for your help!

[@MamoAir]

Hello there. Thanks, I hope the video helped. Subscribe and join my community. Ciao

[@MrHomPun]

Many thanks. I've a one question. Would it hold an Sony ax53 camera ?