Zirconia Crown Preparation DEMONSTRATION. (Super Simplified)

A precise crown preparation / tooth preparation is necessary for the success and longevity of a dental crown. This is a short and and to-the-point video demonstrating tooth preparation for a crown.
In this video, I walk you through the technique for a precise tooth preparation / crown preparation. Each step is explained in detail for better understanding.
The steps involved are in the following order : Occlusal reduction, Buccal surface reduction, Proximal surface reduction, Lingual surface reduction, use of end cutting bur to refine the margins and final finishing of the prepared tooth. I have also stressed on how to get well defined finish lines / margins.
Burs Used for tooth preparation in the video
Tapered Round Bur - TR-13 (Mani)
Needle Point Bur - TC-11 (Mani)
End Cutting Bur - EX-18 (Mani)
Yellow Finishing Bur - TR-26EF (Mani)
Although this tutorial is for metal free crowns, the basic technique and steps involved remain the same and can be applied for any other crown type as well. The only difference is the amount of reduction that is done and the margin configuration.
Watch the following 2 videos to know all the tips and tricks involved in a tooth preparation and the burs required for different crowns (These are the 2 videos that I have repeatedly mentioned throughout the video).
CLINICAL TIPS for TOOTH PREPARATION/CROWN PREPARATION
• CLINICAL TIPS for TOOT...
All you need to know about Burs for TOOTH PREPARATION/ CROWN PREPARATION
• All you need to know a...
Credits :
Background Music - bensound.com
In case of doubts and queries, reach out to me on
[e-mail] OR
Comment below

[@DragoDent]

What is the measurment of preparation please

[@Dentrickstry]

For monolithic zirconia crown prep Occlusal reduction - 1mm (0.5mm extra for the functional cusp bevel) Axial surface - 1-1.2 mm Finish Line - 0.8-1mm

[@DragoDent]

@@Dentrickstry thx doc😍😍

[@nehapatil4409]

Lllt❤❤ļķktlkllkkkklllllttllĺlķĺllĺ❤yjjulty❤​@@Dentrickstry

[@Nightingal.]

Fantastic video. I am dentist for 30 years but still enjoy your videos.

[@Dentrickstry]

Thankyou! Means a lot!😊

[@dhiviavinodkumar8400]

This is,awesome! Clear, concise and so useful.thanks so much Doc!

[@Dentrickstry]

Glad it was helpful! :)

[@shwetaalapuria3953]

We love watching your videos.thank you for your efforts.. excellent presentation

[@shwetaalapuria3953]

Nice video..very good explanation🎉

[@deepthiv44]

Crown preparation very nicely explained ❤️❤️...Thankyou so much mam ❤️ 🙏🙏🙏

[@Dentrickstry]

Hope it helped :)

[@user-gy6lh1ep9x]

Thank u wish the best 4u

[@mcteja1]

Nicely explained madam, but the music keeps distracting please try to remove music from upcoming vedios. Your voice is Cool and Soothing to Ears , So no need of Music. Thank you.

[@Dentrickstry]

Thank You for your suggestion. Will take it into consideration :)

[@BohemianAndy]

I disagree lol. The music is fine - just lower it a bit and it’s all good.

[@robertmitchell6080]

Why do they even have music in the background.?

[@huuphuctranmai9610]

Great video ! Thank you so much 🎉 Can you add subtitles on video please!! My first language is not English so I need those subtitles to translate 😂 Have a nice day madam !

[@thuvan9607]

Is there a minimum age for ceramic crown and bridge treatment? Thank you.

[@aamin6933]

What about maxillary molar. Are there 2 planes of buccal reduction and one plane lingual reduction aswell?

[@wakha6184]

Yes, thats right. Only difference is that the fucntional cusp bevel is on the lingual surface.

[@aamin6933]

Great. How do you decide how much 2nd plane reduction in mm?

[@Dentrickstry]

it depends on the crown you are preparing the tooth for...basic dimensions of the crowns should be followed

[@drsalmankhan007]

Great mam it help a lot 💕

[@Dentrickstry]

Glad to hear that :)

[@drpraseedpaul7004]

Thank u.

[@Dentrickstry]

You're welcome...Hope it helped :)

[@ezgimeric]

Did you prefere rounded shoulder for supragingival margins?

[@Dentrickstry]

Yes

[@childrenofgod3015]

Nicely done..👏 Lord God Jesus save and continue to bless you and your efforts 🙏 amen.

[@tamannabanu9722]

Which surface we have to make functional cusp bevel in the upper molar?

[@Dentrickstry]

Palatal cusps

[@DrDre-sy2kv]

Hello mam. My lower molars have reduced natural height that makes my otherwise normal jaw look retrognathic. Hence I want to increase the height of my molars. Is it possible ? And which specialises in this part ? Prosthodontics ?

[@Dentrickstry]

Prosthodontist

[@shabrab5890]

From where can i get a typhodont?

[@dylansaeed7328]

Nice video and prep Keep it up 👍🏻

[@Dentrickstry]

Thanks a lot! Stay tuned for more upcoming videos :)

[@drsanjeev1000]

Very informative video mam. I want to know HOW TO KEEP MARGINS EQUIGINGIVAL IN A PATIENT. in typhodont your margins are supra gingival. Can you please upload a video on patient,. Operator position, visibility, how to manage tongue and how to counter limited mouth opening. In typho we have too much mouth opening and we can tilt airotor any way we like to any degree. But thats not possible in mouth of patient. Thanks mam

[@Dentrickstry]

Thankyou, will be uploading a video on operator position soon...so stay tuned! Also, if you have your margins supragingival...you can use an end-cutting bur and take it further down at the level of gingiva for equigingival margins.

[@deepthiv44]

Pls can u upload video on anterior crown preparation 🙏

[@Dentrickstry]

Hello, anterior tooth prep demo is already uploaded Kindly follow the link kzbin.info/www/bejne/r5THd5qFf7dmq9U

[@soujanyaceernam3438]

Mam pls make a video on dentin bonding agents

[@Dentrickstry]

Coming up soon :)

[@suchitrakrishnaan9810]

Why music .. can't hear the voice .. its so difficult to hear ..

[@user-gy6lh1ep9x]

😍😍😍😍😍😍🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩

[@dipankarsaha4388]

Can't hear properly, lower music

[@DrMAP786]

👍🤍

[@Blue_Kryptonite]

THE MUSIC IS TOO LOUD TO HEAR THE NARRATOR SPEAKING.

[@francois8470]

Its easy when there is no cheek, no tongue, and no saliva. lol

[@zolabee]

Thanks for the useful video. For the burs should they be medium coarse?