Zongshen 160cc Blow up ? !

[@johncrow5552]

Glad you found your "lost" valve!

[@RallyRanchMotorsport]

What is the benefit of the YX head and cylinder?

[@jeffmee763]

It's not the first one I've seen the valves are weak try to find some titanium ones.

[@stevenphilips3297]

Any input why the valve broke? Too mutch rpm?

[@austincriswell8480]

Hey guys any of you folks know how to set the cam timing I'm assembling my 212 and I don't see obvious marks anywhere to set it, I'd rather not have my valves collide. Any info is greatly appreciated

[@FreeRideKos]

Thanks for the video. Is this basically a YX160 engine?

[@mrpantur7280]

yes. from experience yx seem to be more reliable.

[@eleazarmejia]

Saludo.muy buen contenido 😍

[@nomifraj7056]

Combien le moteur Combien de cc

[@thijsdewilde487]

heel vet, komt er een video van het terug in mekaar steken?

[@br2play714]

Nee Thijs,daar ga je moet achter wachten tegen dat ges ut jun ol groeit.

[@Jazsft]

Hey how do the standard cranks hold up in the Daytona when you do the 212 kit?

[@letsmakeit1995]

A new video will be online within 2 weeks 🔩🔧

[@10zoll]

The 212 kit isnt a Problem the Bike around tears apart ;-) I knew everytime i rev mine @10k for longer than 5 minutes - i had to replace/fix something like Tank, Batterieholder, exhaust, swinginarm or the frame. Not to mention the cheap stupp like lamps or mirrors.... My solution was replace the carb & intake manifold to a small 28 mm Version. That limits the 10k rev range - but now i have the same power like the 190 with the 33mm carb & intake manifold.

[@thizzfox]

Dude u could have bought that motor for that much

[@michaelbennett6550]

More power more problems less riding,lifan 110 is the best engine for the money and Reliable! Not a race engine but for everyday monkey bikes not race bikes I vote the lifan 110 the best all round Chinese motor u can buy

[@Micscience]

I know my yx140 was rock solid even better when I added the V2 race head. Its all in the prevention. Never over kill your bike or constantly hit the rev limiter, proper cooling aka aftermarket oil cooler and change that oil. I use 15w 40 many people use 10w 40.

[@tommojphillips]

@@Micscience i run 20w 50

[@nguyenthanhsang5227]

Ôi chạy rẫy cây sutpap luôn ghê quá

[@safiykhan6532]

How would you replace a kick starter shaft on this

[@eleazarmejia]

Ya salio el video motor de aranque para 160 cc kzbin.info/www/bejne/jKOQY6utd9qVh9E

[@eleazarmejia]

160cc con 2 carburadore kzbin.info/www/bejne/ZmLPqaunpLF8gNE