#1 Mod for ANY Car | Konig Ultraforms 18x10.5

[@Zorbii]

HUGE thanks to Konig for helping me get the wheels. It's been an unbelievable change in handling and I can't wait to see what I can do with these. And I'm sorry it's been so long without an upload! School just started and work is killing me as well but it should let up and give me some elbow room soon! Please just be patient with me. I'm trying lol

[@Zorbii]

Lol glad to be back. Hopefully after exams this week I can get another video out for next weekend

[@R.P.E]

Zorbii Why Would you like your own post? Daniel, you literally are the biggest idiot we can all accept.

[@Zorbii]

It favorites it and goes to the top of the comments. I wanted to make sure it’s seen

[@konigwheels]

LOVE IT! OUR DUDE!

[@ryannn.9994]

Can’t wait for more mods to the car!! Keep up the great work.

[@mikeanfernee2365]

Finally a video being waiting for ever! Love your content💪💪

[@cookdnclapd1209]

what’s the song at 0:22? it sounds hella dope and i wouldn’t mind using it in one of my videos that i will be uploading in the future

[@kourtnymartin5700]

Buddy it's mint asf so proud of you man.💦💙

[@andrewdiaz5345]

Dope content !! I just put 18x9.5 on my f30 for the front It’s about the same clearance but ima put a 3mm spacer cuz I think it hits at times

[@ImInYoCl0s3t420]

they look dope! cant wait for more uploads

[@luvbreeezy]

do you think i could run 18x10.5 +15 all around on my 350z (stock suspension)? not sure what size tires i should run though

[@Zorbii]

Absolutely. I have 275’s on my +25 wheels so you might be able to get up to a 305 rolling your fenders.

[@fortheLOVEofMODsMike]

I watched this due to being interested in the Ultraforms and the pictures look like crap on eBay and don't do them justice. I wanted to see them 'live' on video and this was it....... I'm sold. No further research needed. Looks like the finish IS what I'm looking for as well combined with a no-nonsense simple 'Gear' sprocket kind of look. NICE

[@Zorbii]

I was sketchy about pictures too and wanted to give it a shot being that nobody had them yet. Quality is 10/10 and I’m extremely satisfied with how they look in person. The powder coating is great

[@fortheLOVEofMODsMike]

Thanks. I was back and forth with a set of TSW's that cost almost $500 more and figured that due to that they 'must' be better. I didn't like the fact they are Matte finish so I wanted to check these out further. I see now the Ultra's ARE a gloss and the Color is perfect (darker than usual grey wheels out there). It was a BONUS to find out how light and strong they are so I'm going ahead with my order on THESE

[@babyh2121]

Hey Zorbii! Thanks for the great video! I'm looking to go square on my 06 G35 6MT. I'm looking to do 18 x 10.5 +40mm offset. The other wheel option is +20mm offset. Do you think the +40 is the safer bet? Also, what offset were the Konig's to begin with?

[@Zorbii]

+20 all the way. +40 will hit your upright spindle and the wheels won’t clear. What I have is +25

[@babyh2121]

@@Zorbii Thanks for the quick response. Are you +25, after your spacer? Or are the Konig's +25 from the factory?

[@Foursterrr]

subscribed! Question. I just got a pair of wheels. I'm new to the PURCHASING portion of aftermarket wheels (knowledge level: rookie). I have: 18x10.5 +22 (squared setup) with 265/35's all around on Federal SS595's. 2008 350z with no suspension mods at all Will she clear?

[@Zorbii]

Yep! You just might have to do a little fender rolling for tucking your wheels in cornering

[@Foursterrr]

@@Zorbii Thank you so much! Now I'm more excited to see how they fit! I'll update on this comment how they go!

[@satomon]

What do you think front 245 and rear 275 ?

[@BluntSwagg]

the song playing while you"re putting on the tires was dope as hell. can you post the info?

[@klemire9555]

I’m currently on 19/8.5 (245/35 19) front and 19/9.5 (275/35 19) rear no idea the offset but they’re sunken in. I’ve been looking at getting Avid AV6’s for my 05 Z. I was looking at 18/9.5 +24 in the front and 18/10.5 +22 in the rear. Will they fit or would I need to get a higher offset or would I be better off going 18/8.5 front and 18/9.5 rear?

[@Zorbii]

I would go with the 10.5 in the front and rear and run a square setup. That’s what I do on my car. +22 will clear fine, you just might have to roll your fenders a little bit to clear the tire.

[@klemire9555]

@@Zorbii appreciate the response, is a squared setup better than staggered? I just want good fitment without having to go too crazy.

[@Zorbii]

I prefer a squared setup and 18x10.5 is common on our Z’s. It’s what I’m running and a lot of others are running too.

[@1dolladolla]

Front offset is +25 without spacer? What’s a good offset for front if you’re running 10.5

[@Zorbii]

Anything less than +25. If you’re over 25 you won’t be able to clear the suspension without spacers.

[@1dolladolla]

@@Zorbii What offset are you running, and did you use a spacer too?

[@Zorbii]

There’s are +25 front and rear. Squared setup

[@fordperformance8900]

Does itsjusta6 help u at all? And nice car

[@Zorbii]

No. We are both so busy doing our own things that barely even seen him at home. My job has been keeping me away from home a lot recently but it should calm down soon

[@fordperformance8900]

Cool. And by the way u can snap a wheel by hitting a curb. My friend was getting a little sideways for fun in his cobra and smacked a curb and completely snapped it

[@Zorbii]

That’s exactly why I sacrificed an extra pound for strength

[@fordperformance8900]

Zorbii very smart

[@PalmsAngels]

I have a question I have 18x10.5 all around but I don’t know what type of tire size to get

[@Zorbii]

I have 18x10.5 +25 with a 275/35R18 tire

[@PalmsAngels]

@@Zorbii some friends told me I should go with 225/45/18 fronts and rears 245/45/18 what do u think

[@PalmsAngels]

On Federal tires

[@Zorbii]

Fuck no. That’s way too small for a 10.5 wide wheel. It’ll be stretched like gell

[@PalmsAngels]

Also it’s 18x10.5 +22 all around

[@Sergio_blessedyourblock]

Hello I’m new to the channel 👋

[@Zorbii]

Hello welcome

[@drew3317]

What color is your Z

[@DDHuskey]

you should of kept the spacers on the back

[@alexaa5912]

So no spacers were used front nor back ?? 🥵

[@Zorbii]

Back doesn’t need it. And nope! No spacers. If I get any bigger tires though, I’ll have to put spacers on the front

[@grantxx3036]

Go widebody!!!

[@STR8WESTCOASTN]

Whats the offset?

[@Zorbii]

+25. These are discontinued now. I just got some new wheels with +18 though

[@STR8WESTCOASTN]

@@Zorbii Thanks! I just got some 18x10.5 +22 square, and I'm debating between 275/35 or 275/40 for the fronts. Decisions, decisions. Did your set up rub?

[@Zorbii]

I didn’t have any rubbing at all, but the wheel was really close to scraping the vertical part of the spindle. With your offset, it should help though.

[@STR8WESTCOASTN]

@@Zorbii Are you fenders just rolled, or are they pulled out a bit? Mine are still stock, but I was going to get a roll, but my roller said that the fronts may deform. That made me a bit weary as I don't want to have deformed fenders. I was looking at a lot of posts on my350z, fitment industries, etc., and I don't see any with deformed fenders. By any chance, do you know what my fender roller might have been talking about? Are 350Zs known for deforming when rolling fenders?

[@Zorbii]

The front fenders will flare slightly if you roll them. They’re thin. The rear also will roll just fine. Both of my front and rear fenders are rolled.

[@rolandomartinez9299]

Dam ig u don’t know u can push down instead of pulling up🤦‍♂️

[@Zorbii]

If you push down, the most force you’ll have is your body weight. Pulling up it’s 100% determined by strength