Zorki 1 CLA - part 3 (curtains replacement)

  Рет қаралды 772

Alin Ciortea

Alin Ciortea

Күн бұрын

Пікірлер: 8
@petercooper9054
@petercooper9054 Жыл бұрын
Just finished watching. The glue i got with the curtain and ribbons from aki-asahi is really good in that its almost black. I used a lollypop wooden stick with 3 clothes pegs to press the overlap down. The thread for your stitching do a quilters knot which is easy and dont cut the thread ends off. When i checked on my old nicca ribbons the excess thread had been glued inbetween the ribbon overlap thereby preventing anything from coming undone. That way you can ditch the superglue and that will harden and become brittle. Apparently they used shellac glue back in the day which is why now they are all brittle. I stiched the ribbons with red thread like on a leica because i found it easier to see what im doing! Gave up on the nicca 33 till i fully rebuild the nicca 5 as everything works except 8 and 15th. 8 is like 1sec so at least i have a 1 second now on that camera! Strange they made it without 1 sec as the slow speed unit is the same as the nicca 5. Cant believe they saved that much money by not putting one on at the factory. Wish i could go back in time and watch them being made!
@AlinCiortea
@AlinCiortea Жыл бұрын
Good idea with the stitching ends being hidden inside the fold. I still haven't been able to stich the ribbons properly. The material itself is not really friendly with the needle.
@petercooper9054
@petercooper9054 Жыл бұрын
@@AlinCiortea I used very fine thread and needle. Looking at the Leica red threads it's done in a square formation.
@AlinCiortea
@AlinCiortea Жыл бұрын
@@petercooper9054 maybe I'll give it another go next time :)
@vedranr.glavina7667
@vedranr.glavina7667 Ай бұрын
Buna ziua, cat ar costa un CLA cu schimbare de perdea pt Zorki-4 ? Multumesc frumos.
@AlinCiortea
@AlinCiortea Ай бұрын
@@vedranr.glavina7667 Neața! În principiu 600-700 de lei (în funcție de starea benzilor. De regulă nu necesita înlocuire, caz în care costul e de 600.)
@vedranr.glavina7667
@vedranr.glavina7667 Ай бұрын
@AlinCiortea va multumesc. La jumatatea lunii Ianuarie va voi contacta din nou. ZORKI -4 an 1963 a fost al bunicului meu. Multumesc frumos.
@AlinCiortea
@AlinCiortea Ай бұрын
@@vedranr.glavina7667 cu drag! Sărbători fericite!
Zorki 1 CLA - part 2 (disassembly)
13:38
Alin Ciortea
Рет қаралды 753
Leitz Summar 50mm f2 CLA, part 1
40:43
Alin Ciortea
Рет қаралды 441
She wanted to set me up #shorts by Tsuriki Show
0:56
Tsuriki Show
Рет қаралды 8 МЛН
Sweden's most secret weapon
15:28
Hidden in Sweden
Рет қаралды 141 М.
Estes Sasha Build, Part 3
15:56
Eric Dorward
Рет қаралды 48
The Rinaldi American Tomahawk from La Cognee
20:51
Urban Lumberjack
Рет қаралды 2,4 М.
Industrial Endoscope: A Must-have Tool For Every DIY'er?
10:13
Proper DIY - Tools & Effect
Рет қаралды 22 М.
New Year, new plans, new resolutions.
24:35
Alin Ciortea
Рет қаралды 353
Making a 3 sensors shutter tester - part 3
49:56
Alin Ciortea
Рет қаралды 380
Zorki 1 CLA - part 1 (disassembly)
20:45
Alin Ciortea
Рет қаралды 1,7 М.
Making a 3 sensors shutter tester - part 2
28:49
Alin Ciortea
Рет қаралды 300