Zoskay 35kg Servo Test in the TRX4

[@ddruckmu]

It would have been nice to see test on your servo tester to see the actual numbers to compare to your other tests especially current draw at stall and torque.

[@prestonsrc]

Sounds way better. The sound alone almost has me sold lol

[@rickboyster8014]

Great comparison of the 2, that BEC sure ads to the servos performance. Currently have the 20kg and so far so good.

[@adidastrev8689]

Great show of both! Fun how you can see the difference between the two! Have a good one!

[@homeland724]

I love these less expensive servos. 30kgs in both of my better trucks and still going. way more then enough power to not get all "comp" crazy. Good review bud!

[@PaulRawlins2]

Excellent test and vid! Thanks for doing the footwork testing this thing... Now I have to buy one!

[@theguyinthecomments9543]

You got me hooked on crawlers man. I used to love to go fast but I really enjoy the long run times as oppose to the 15-25 minute speed runs. so relaxing but fun as hell to boot. So far I have the element trailwalker and trx4 sport. I like the diversity of these machines. I plan to get an axial next just not sure which one yet. I like the look of the wraith but I hear it's a bear to wrench on. Anyway, thanks for the good content

[@marcochavanne]

I am running a Banggood version on 7.4v with my Hobbywing Axe. It's almost silent and can turn end to end with locked diffs on carpet. Will see how it holds up over time but I'm impressed.

[@shug97]

I've been using the DS3225 in a few rigs and the perform great. The added torque of the DS3235 will come in handy for sure. About £25 in the UK. Nice haircut by the way fella.

[@ExocagedRC]

lol thanks, I cut it myself, I know the back has to look horrible

[@flyingfortressrc1794]

Thanks for this. Thinking about upgrading my Gen 8 Scout servo and this would probably be the best affordable option

[@JMHZ2401]

I have 2 of these and I am happy with them.

[@DADRacingYT]

Exact same one I have on my Sport. Been happy with it. Running it with HW1080 also.

[@Goingforbroke71]

External bec?

[@rcmedia9516]

I run these in my m2c Kraton. Works awesome. Thanks for a great video 🍻

[@RuisRcAdventures]

Catching up on some of your old vids 😀. I got me one of these servos in 1 of my rigs at 7.4v and its pretty strong 👍

[@moreno8903]

I also have a trx4 sport, which one should i get the 270* or the 180*??

[@JesseBMotors]

I’ve got the 25kg one and really like it.

[@LargeeeScaleLife]

I have one of these to put in my TRX need to order another one for my summit

[@eckos2310]

I’m glad I found your video because I was looking at getting the same servo for my TRX4 Sport as well but do I need to get a BEC?

[@donelias1981]

I just upgraded to a Traxxas 400 and am impressed with the speed (haven't run it) but the transit time might be slower than this but operation appears quicker. All in all I like this direct real world comparison of servos and wondering how this would compare to the 2255.

[@ExocagedRC]

I've had both of the traxxas servos, believe it or not, the 330 tested stronger than the 400 one.

[@donelias1981]

Exocaged RC really? I could of saved a few bucks and a BEC and gone with the 330? The 400 is a night and day difference vs stock

[@NacGT4]

A small warning! Tried fitting this in an otherwise standard TRX4 Bronco with BEC and found that the servo lead was about 2 inches short. I could test but couldn't reseal the radio box. Extension leads arriving tomorrow!

[@1elaijah]

I have the 25kg coreless, it’s quiet and about twice the strength of stock trx4. Probably going after something stronger after this one earns its money in use first.

[@ExocagedRC]

1elaijah the stock trx4 servo is horribly weak

[@ryanwest150]

Which control angle did you get?

[@ka4172]

It would be nice which Servo "you" use the most and which breaks most under hard use crawler conditions till a year or which suvive the longest time.My most durabel i use was the JX 45 .

[@prestonsrc]

This is awesome! I was just looking to try the 35kg but didn't buy it lol.

[@GastonMaqueda]

You have the same set up than me. The kit its different, I have Tamiya CC-02

[@rcmigschannel]

Strong, plus nice and quiet 🤙🏼 awesome

[@ExocagedRC]

yeah no more Savox for me! LOL

[@Ferra3904]

Need to hook it up to your servo tester!

[@ExocagedRC]

I'm building up a new set of servos to do that. Got a few more to get before I do.

[@michaelleee3417]

Nice truck looks awesome

[@pauls1816]

could you please test the 70kg jx servo

[@alexd.r3519]

Si le instaló un UBEC ganaría más fuerza,ya que conecta directamente de la batería??? Tengo uno 30 kilos, el coche tiene un peso de 3,2 kg Y Aún llevando un hobbywing 1080 con todo el voltaje configurado para el servo le cuesta ...

[@grski900000000000000]

How do You run the Traxxas Shift Servos at a higher voltage from the ESC without frying them ? are you running them to the BEC ?? any help would be great as I Have the 1080 ESC and currently run it at the lower voltage so that I don't fry the Diff Lock Servos and Two Speed Servo (Like I did after Watching the RC Review Video Setup of his 1080 ESC / Expensive mistake ... love this channel Exo :)

[@ExocagedRC]

they are at 6v, I have a bypass on to power the steering servo at higher voltages

[@fernsolo]

Looks like a great servo for the price 👍

[@henryoak2001]

What control angle should I get for the tr4x?

[@raymtlee]

Can I use this 35kg servo for my TRX6 with a 3C 11.1v lipo battery?

[@daver18qc]

It's nice that these cheap servos do well, the only thing i have against them is you can't buy a Gear Set for them, so each time you strip a gear, you need a complete servo. This "disposable" mentality needs to stop sooner than later. That's why i'll go with a Savox or Hitec or Tactic or Hexfly unless the chinese start selling Gear Sets too.

[@ExocagedRC]

Right now I'm a big fan of Reefs servos, should have the new 555v2 soon.

[@dsdiesel8667]

Purdy sure Hexfly’s are just rebranded Zoskay’s?

[@madfpv3154]

Hey buddy good morning, I was thinking of upgrading to a reefs 500 on my sport. Did you have any issues with steering endpoints witj a aftermarket servo being you can't adjust endpoints on the sport?

[@weschambers7612]

Does this need a BEC?

[@sharkusd]

Hello for trx4 sport is better 180 ou 270?

[@paulclancy2404]

Hey I just got the 1080 hw for my capra , do I need bec to run 8 volts too?

[@ExocagedRC]

the 1080 will only put out 7.4v and yeah it should run it just fine

[@paulclancy2404]

@@ExocagedRC I thought so

[@paulclancy2404]

@@ExocagedRC so I add bec than I have option to run 8 ?

[@ExocagedRC]

Paul Clancy depends on the bec. The cheaper ones have a jumper to get either 6v or 7.4v. The castle like I use can go to 9v. Now keep in mind if you have a traxxas like shown you can only put 6v to the receiver and the micro servos. So to get HV to the steering servo you must bypass the receiver.

[@paulclancy2404]

@@ExocagedRC no I do have capra, tho I forgot I have the micro in there too thanks i guess still need to bypass to even run 7.2

[@RickJamesFPV]

Great video Sir. Subbed.

[@douglaselliott8298]

I'm glad you "tested" a non-competition class(that includes the braggart class) servo. There will always be precision weighted, carbon fiber shafted golf clubs and titanium frames for bicycles and motorcycles. But celestially priced items like that can lose as many enthusiasts as dollars made on their sale. I also found that one can find extremely powerful, exalted brand servos at a $30+ savings just for NOT being rated 'waterproof'. I got 444 Oz of torque and .14 speed at a rated 6.0 volts from a 'Name-brand' coreless for $30+ less than Traxxas's 400 and other BEC recommended boutique brands.

[@ExocagedRC]

yeah for sure I do gotta say I'm kinda getting spoiled with the high end servos like the Reefs RAW500. Issue is I'd have to take a loan out to put them in everything. LOL

[@sserna1077]

So for my gen8 would this 35kg better then a 25kg?

[@ExocagedRC]

I’d say yeah, but maybe not a HUGE amount. It’s a nice budget servo for sure and I still have this one in the Superlite.

[@cnnlt200]

Put a External bec on it. Internal bec cannot produce enough amps

[@ExocagedRC]

It has one on it

[@cnnlt200]

@@ExocagedRC oke I'm sorry🍺👍 I see it a cc 10a. Shouldn't skip so much of the vid haha

[@ExocagedRC]

Niels LoL yeah. When I do these types of videos I usually talk or show some tech.

[@wilberthchaconalfaro7690]

Nice video. What motor and tires are you using?

[@ExocagedRC]

Not sure on motor but those are the duratrax deepwoods tires.

[@tomandrews5392]

Is the servo plastic or metal gears?

[@ExocagedRC]

metal

[@nexus7138]

This DS3235 35kg servo is $19 on Aliexpress!

[@ExocagedRC]

I've never ordered from them

[@nexus7138]

@@ExocagedRC , Aliexpress is like china Ebay. Same principles. Platform for a lot of single vendors with payments regulated by the platform. I order from them a lot and the prices there are from few times to 10th of times cheaper. Just go and check this specific DS 35kg servo and see. There you can buy dirrectly from a lot of the OEM vendors.

[@ExocagedRC]

Nexus I’ll spend some time today and look them over. Thank you for the info on that.

[@TheRSTim]

Can this servo handle 8V?

[@ExocagedRC]

I was running it on 7.4 in this video, I've run the 20 and 25kg versions on 8v and they've done fine so I'd have to say yeah it would run fine.

[@henryoak2001]

Did you need a BEC for this servo?

[@ExocagedRC]

I did not

[@667Gurba]

I have two of these in my E Revo 2.0 and they are definitely not worth the money. @6v they are supposed to have 30kg torque so two should be enough for the E Revo but they are just not up to the job.

[@RCOff-Roaders]

Bro it safe to use 45kg 280° on trx4 f150 high trail?

[@ExocagedRC]

yep

[@martinmtb32]

Is the trx 4 brushless??

[@ExocagedRC]

I think that one was brushed in this video

[@Zachcamaj]

First