Lol😂

@@facetious_1 what’s so funny

@@facetious_1 ? 😂 what

Did u mean removing the drive gear from the crank itself,?

They are known to stop pumping oil causing no oil mixed with your fuel damaging your motor. If you mix in a container you are guaranteed oil and fuel, peace of mind. Hope this helps.

I bought vaccum plugs @ Autozone

No it was just a plug and play.

@eldorado5766 oh cool! So I just bought a 2006 malib, but I got it for cheap because of the power steering problem. I heard chevy did a recal on it, so I'm gonna see if they will do it for free. If not, I am going to try the same thing as you. Thanks a lot for this video and the response:)

I don't I bought mine from geekparts. $300

Thank you.

You are welcome i have been working on it for over 3 year's I have more time than money. Lol Have fun on you restoration and post videos as you go.

Do you have any videos of your boat. Would be cool too see your restoration as you go.

@@eldorado5766 i was set to pick up the boat next week, but i was informed last night that the previous owner decided to keep the boat to restore with his son's, much like i was going to do. Now it's on to searching another

@@HaxPotato wasn't ment to be. but I'm sure you and your Son will find one and when you guy's do would be cool to see them videos. Thanks for watching my videos👍

It was shaking and would loose power on steering wheel.

And not a year later had to replace it again.

Thanks I'll be selling the Maxx I have,No dip stick,no power steering fluid¿Ground week drive¿3 striking yourrrr out 👉

This!

I'm thinking of going out this Friday to try out a new motor it's a 55hp chrysler I picked up for $20 thanks for watching.

Lol right. Man that was funny moment.

Thanks im uploading two more videos. You are going to laugh.

Its an easy fix if you have the tool's and patience.

That's cool welcome. Do you have any pictures.

@@eldorado5766 yes sir

What should i look for?

I said power instead of electric motor?

Replace the motor it comes with a new sensor.

@@eldorado5766 do I have to remove the entire column?

@@sonricsesvel4596 yes it's not hard at all.

@@eldorado5766 thanks for your prompt respond I have seen videos that said that needs to be reprogrammed.

@@sonricsesvel4596 it allready comes programmed it's a plug and play. I bought it from partsGeek

Hey I'm working on my brothers truck trying to find the problem on his engine. But other than that I'm good the Lonstar is parked collecting dust wating for parts too rebuild the out board. How you been.

@@eldorado5766 I've been good brother just hanging in there one day at a time and enjoy my time with my family and still getting out there on the waters with my Lonestar and lately the past 6 months the engines been good to me thank God ever since this new guy I meant worked on it and he did an amazing job. It's only forty horses but that's all I need I don't really go fast I like to cruise alone and post up and fish and catch. Maybe I can call you one evening bro and we can catch up about the El Dorados.👍🐟

@@moralestexasfishing5583 that's good bro. familia and fishing. Most defenetley keep them videos coming brother.👍👍

You have too replace the same part i did. Hope it helps.👍

I will try too soder it. And i will be ordering my parts from marine out boards.

Look up your part number at Marine engine. Com then check it on eBay you'll probably get a better deal. When you check the part number on eBay check it with the zero in front of the number and without the 0 in front of the number. You'll be surprised at what comes up!

@@THISOLDOUTBOARD1 i sure will thanks.👍

That's crazy. I'm just getting off work i will try too up load a new video. 👍👍

I up loade the video this morning. The engine and the head's where not hot at all. They wher warm i kep on touching them. To make sure it did not over heat. I did buying a 55 gallon to put engine in. and it stayed just as warm.👍thank you🍻

@@eldorado5766 👍

Thank you im going to do a rebuilt on the 1964 Evinrude 75hp water pump seals.

@@eldorado5766 Sounds good !

Y si carnal. So I am going to leave it on.👍

@@eldorado5766 Estodo carnal.My rucca does the same jales bro and i make it work,Se Valeh👊

Thank you I'm trying. 👍

Thanks that is going to be my back up incase i lose the main motor that I'm still working on.

Thank you. I havent had time too put up the pictures of it painted.

Thank you. I picked it up for $500 with 75hp evinrude.

@@eldorado5766 wow. Love deals like that

@@THISOLDOUTBOARD1 the guy i bought it from hauls trash from houses and the owner told him to give him $50 dollar's and the boat is yours with all the trash in it. Lol

@@eldorado5766 wow

You know i was doing alot of research and whent with just primer and rustolium paint and i will be puting it in salt water to see how it will hold up. I don't know how good it will hold but i will find out.

@@eldorado5766 I understand. I am going with Rustoleum as well... if the self etch primer is too much you can wipe the hull with a mild acid before you prime too. You can get pool acid at Home Depot for like $10 just be careful, wear googles and glove (that stuff burns, ask me how I know lol) It opens up the pores in the aluminum and gives the primer something to grab onto. When I did a 14ft. I used rustoleum but added hardener from Tractor supply - gives it a harder, shinier finish.

Thanks. Do you have any picture's or video's of your project.

@@eldorado5766 I will see what I can find. So far I've just replaced a lot of the floor with 1/2" maple ply, stainless screws and Thompson's watersealed it. And working on stripping paint from the trailer tounge to show there is no Vin so I can get title from California highway patrol... The guy I bought it from had title for the boat but not the trailer. Gotta do tires and lights next so I can get legal. It's a big project, doing it with and for my little one. 😀 The trailer is an original Lonestar Roadmaster though.

Nice can't wait too see all the progress. 👍

Hey Dennis Mariner. I did use very little paint remover. But it just fall off with that scraper i was using. Check out my other Video's on the Boat and if you have any Questions i will gladly answer them. Thanks for watching.👍🍻

Do you have any picture's of the Boat?

@@eldorado5766 , Hey El Dorado I'm gonna shoot some Video of my 1960 Lone Star ElDorado 18' and try downloading it to show ya ,I'll keep ya posted on it

@@dennismariner4897 can't wait too see it.👍👍 i have to up load video of how the paint job came out i used RED & WHITE to give it that old classic 50s 60s Look.

@@eldorado5766 ,Hey look me up on U-Tube Dennis Mariner I shot a short Video of my Old Lone Star ElDorado I have

Will do. 👍

Thank you brother. I'm going with red and white, and yes i kind of figuerd you wher going to do the Taxas colors👍put that big Star on top. Man it will look nice, can't wait to see it. I'm glad you guy's are enjoying my videos.

I will be uploading videos as i go stay tune.👍

Thank you brother maybe we can meet half way and do some fishing and Spear fishing that would be awesome!!🚤👍🍻

Sorry brother for the late responce. My first time doing a rebuild on an out board. i order a rebuild kit for the carburator once i do that it should stay on. Can't wait to get it in the water. So that is going to be my back up motor. Stay tune i have more to up load. 👍🍻