You don’t say which way to turn the yellow thing to tighten vs loosen.

Why my overlock gets hard to sew And break the thread Not smooth sewing as its used to Can anaybody help me please

Thanks Kevin!! Very useful .. I save ALL your videos.

Thank you for sharing that information. I found it very helpful.

Thank you so much! That pedal was driving me crazy. Now it's possible to control the machine

I found some wash away tape on Amazon that I've ordered that will be useful when sewing our flat felled seams. Here is a link to it: amzn.to/3C5dabd

This video helped me fixed my grandma's machine, thank you so much, a gear shattered in mine and I could pull it apart and put back together but I couldn't figure out the timing, it's good that this video kinda shows genuinely how to work it out since I have a different machine

I have this same pedal on my necchi machine and this fixed it! Thank you so much for the detailed walkthrough

Should there be any tension in the bobbin? I have a used HD and I'm curious if I need to buy a new bobbin because even after tightening the yellow screw there is Zero tension on the bottom thread. Thanks for the nice video

Can’t actually see what you are doing. Readjust your camers

Have been really looking for a video on this sewing pattern and cannot find one. Will you be posting one? Can't wait to see!

Brand new to sewing I have the 4452. Got it to where I can practice some stitch’s and then it jammed up my needle was stuck and I had to take it all apart to fix it my guess is I didn’t put it back correctly because it jams up at my first stitch so I check the bobbin area again and each time it does the same. What am I doing wrong. What did I do. ?

this video rules

I’m just setting up my brand new Heavy Duty 4411 and the timing apparently is off. It’s not with the bobbin, though. There is a screw that attaches the upper threading arm and it’s hitting a metal plate that is part of the stationary metal post. I live out of 5he country and can’t find anyone who can repair this. Any suggestions?

Hello I have a singer HD6800c I can't get the fabric to feed through can you help me out with that? Thanks

Hello i just got a singer hd 6800c and the dog teeth aren't feeding the fabric through can you help me find out why.

Thank you so much for your video sir. I had just bought a 4423 in europe and was losing hope of being able to sew a straight line at any point, because of how fast it was going. Now it is 10 times easier. 🙏

I was altering a sleeve and and for some reason, I wasn't getting it and your video was helpful thanks alot

Do you know if the 6800 C and 6380 Hd use the same bobbin size? 15 or 15 J. I love the HD 6380. I am hoping I like the 6800 C as well

Hi there. I thank you so much for providing this content. Some of us can't afford to pay the price to service the machines. I'm sure it's worth it but it's out of my budget now. I want to oil and service by Singer HD6800C. However, I cannot figure out out how to start by remove the cover. Unfortunately, it doesn't have a top piece like this model. In addition, there are hardly any videos on my model at all on KZbin. Any chance to can provide direction on how to remove the cover? I have searched for the service manual and can't find it anywhere. Any help you can provide will be greatly appreciated.

Not all the included speed controls are built with that adjustment pot. There are many externally identical versions that are built with slightly different circuit versions inside, without including that adjustment control. It depends on which of their suppliers built the speed control for them at that time. The individual machines can get smoother running and easier to start up as the machines eventually wear in, as some are initially built pretty tight and clunky from the factory.

I am new to sewing and I dont think this brand sewing machine is good for beginners. I havent been able to sew because I cant manage to have the thread not give me issues I dont even know if there is truly a malfunction with the machine or its just me doing something wrong. I have had this for one week and am still not able to get it to work. It came with no manual. HD 44s.

Amazing. One question-- my top thread is not catching on the bobbin hook, but how do I know if my problem is needle height, hook timing, or both? I have a brand new Singer Heavy Duty that was working fine for the first 2 days I used it and on the third it got jammed up a little and when I cleared the jammed thread the timing was off. Thanks!!

Thank you!

This is a great top! I would love to see more Lutterloh and more about your industrial machines. I have a Singer 20-U and a Juki 9000 and they have made a believer out of me! 😄

Where is the sew along?

I have always cut my stretch binding across the grain rather than straight. But recently ordered the binding attachments for my serger and domestic machines and after watching your video on binding knits it makes more sense to cut it straight of grain. Thank you!

Thank you so much this vidéo Is very helpful

THANK YOU!!! I was so spoiled with my older machine (RIP) and never realized it. The replacement I got came with the bobbin thread too loose and suffice to say, You SAVED Christmas!! I'm running behind on getting presents out, but thanks to this video, we're back on track.❤

I put a link to the pocket fabric in the video description. I buy the 2.5 yards x 60 Inches. They come sealed in a zip lock plastic bag and it protects the fabric if it isn't used for a while.

Oh, I'll be doing a mock up pair first.

Thanks for review

Thank you. I was about ready to throw the whole machine trough the window. Having such simple issues when you are new to a machine can be infuriating. I got a new one for Christmas and it is not as easy to understand as my great grandmother's that I have been using for years now. Thank you.

I know this is eleven years old, but thank goodness you made it! I was in despair with my new overlocker that I could not work out how to thread, you have no idea how grateful I am! Thanks for all the details and showing us exactly what to do, I watched it and followed you and IT WORKED! Fantastic, I have always wanted an overlocker and now I can actually use it. It took me all afternoon but now I understand it which no other video showed. Best wishes and much gratitude from me in Australia 🙂

re 25:06 When you make set-screw adjustments to the timing, you should again watch it as you rotate it by hand, before you close it up.

Hi,I hope you could help me, I have hobby machine, with thicker fabric the bobbin does not spin. It only sews normally with very thin fabric...

Thank you so much. This is the only video I could understand and follow re: the holding right sides and pulling through. Lots of others presume you know how and do it all too quickly. 😊

I will no longer pay for my costs to be hemmed anymore

I was looking at the Singer HD 4432 but started hearing a lot of complaints about the pedal being too sensitive and making it hard to control it / make it go slower without modifying it. Do you know if the pedal on the ST371HD provides better control?

This machine is not made for leather. Why would anyone buy a walking foot or triple feed Consew, Juki or other big name at 5 times the price?

Quick question maybe someone can help with. I’m new to sewing, i came across an older singer 6215. I’m noticing when reverse stitching, the stitch length is much longer than it is going forward. Not sure if that’s intended, or if something is wrong with the machine itself (it’s from the 80s and sat in a closet for the last ~20 years. I’ll have a short stitch length set, but the moment I reverse stitch, it nearly doubles the stitch length only in reverse. Thanks in advance.

Thank you so much for posting this. You just helped me solve 1 part of my problem! Thanks Kevin! Any chance you might know why I am getting a lot of pulling resistance on my thread after I place my thread through through part 4+5 of my tension disks? (I have a Singer 6800C). I know I am threading correctly.. This is something new. Have an amazing day!

Thanks

Where did you get your pattern from?

So. What if my thread is bunching at the bottom. And not pulling my material through. (It stays stationary) And the tension on the machine is 0? I read somewhere that, that means my bobbin tension is too loose. I’ve tightened the bobbin a half turn. And it’s still bunching at the bottom.

I am using the 3 thread mode and the needle thread keeps getting unthreaded! I have changed the needle, original Singer, using high quality thread and, still the problem remains! What could it be??

I had to adjust my timing and i did that but when i put it all back together it now sews in reverse!! I cant figure out what i did =(

Hola, yo lo giré hasta el tope , porque en otras pocisiones sonaba así como se escucha en en video y pensé que no era bueno para la máquina, será así? Como que algo roza . Al girarlo totalmente no se escucha el ruido y la velocidad va en cuanto aprietes el pedal. Agradecida y espero que sirva mi aporte .

How can I adjust a similar scenario in a (TYPICAL brand) walking foot machine

Why is my hook not turning enough though I removed all the screws