Good morning, I bought an intelliconnect box and I am not able to connect to intellicoinnect via the access point to connect it to my Wi-Fi network. I followed the steps in your guide, I placed the intelliconnect next to the router to ensure I have a good Wi-Fi signal. When I try to find the intelliconnect link via my iPhone it does not appear. I closed the IntelliConnect brake, restarted my router, restarted my iPhone, nothing worked. However, the green light on the intelliconnect flashes. The interliconnect antenna is well connected to the side. I have tried several times to close the breaker and reopen it and I am still not able to connect the intelliconnect to my Wi-Fi network. My Wi-Fi network is 2.4 GHz. I would like your help to resolve the problem. Is it possible that the intelliconnect I purchased is defective? Thanking you in advance. PS, if you have a technical service that can correspond in French, that would be appreciated.
@Vessoul4 күн бұрын
Great walk through. 👍🏽
@RayVrodray12 күн бұрын
Followed your instructions and now living happily ever after! Thanks!
@johnp547412 күн бұрын
I can change the light colors and different intellibrite light shows on the app but not able to get the flickering red light back on the Magic Bowl that looks like a fire. It was working before I started changing colors in the app.
@VRFDeshi14 күн бұрын
What issues can not having the air bleed screen create?
@libsrthecause18 күн бұрын
Nothing but TROUBLE from this system. Can't run the ignorant thing manually can't get thru to customer service its a 5k upgrade down the drain. What junk
@charlesromney18 күн бұрын
The intellibrite 5G is not the same as the Architectural series?
@Pentairpool17 күн бұрын
The IntelliBrite Architectural Series is the direct replacement to the IntelliBrite 5G. It is up to 60% brighter and up to 50% more energy efficient compared to the IntelliBrite 5G. To learn more, we recommend contacting a Pentair Pool dealer. You can find one near you, here: www.pentair.com/en-us/find-a-dealer/pool-spa.html
@charlesromney17 күн бұрын
@@Pentairpool Thanks for the info. 👍
@unacharmer22 күн бұрын
spends mor time doing wheelies than cleaning I swear
@user-cu1dx5ex4iАй бұрын
I just wanted a good overview about this product because I am thinking about adding one to my Pentair pump. Not informative and irritating to watch with his corny presentation. Not funny!
@ENTOBYMUSICАй бұрын
Totally done wrong ,the seals are being installed wrong and the pump will leak.
@2l84me8Ай бұрын
My filter lid will not come or no matter what I do. I already removed the black ring, but the two halves refuse to come apart.
@jayortiz8617Ай бұрын
Thank you. Please continue to add more educational videos so that safety and proper use of the equipment can be best achieved.
@deldeekАй бұрын
How can we connect to a wireless network ? It keeps spinning and won’t find my network or any network ? Also when creating an account it goes no where and it times out !
@PentairpoolАй бұрын
Hello, The IntelliCenter doesn't link up with a wireless network; instead, it connects to the network via an Ethernet cable. This connection is established either by directly plugging into your router or by using the 900Mz Wireless Ethernet Link kit, which transmits a virtual Ethernet signal from an indoor to an outdoor antenna. For more information, we recommend reaching out to a Pentair Pool dealer near you. You can find a list of Pentair Pool dealers near you, here: www.pentair.com/en-us/find-a-dealer/pool-spa.html
@deldeekАй бұрын
@@Pentairpool I see , I am able to connect to Ethernet using the kit , but again when attempting to create an account it times out can’t finish this setup thus I am not able to even login to the app for remote functionality 😢! What am I missing here ? Thanks again !
@PSIstudios13 күн бұрын
@@Pentairpool if the intellicenter doesnt link up to a wireless network, why is that option right there in the menu? and why did I just see a video showing how to do it??
@bsctfaАй бұрын
Great, clear, instructive video. The presenter doesn't pretend to be a "TV host" with useless time wasting blather. The tutorial was perfectly suited for this repair job. I followed the steps and procedures exactly as the video demonstrates. The repairs worked perfectly. Thank you.
@amysequeira2540Ай бұрын
It’s absolutely not intuitive.
@twaterman7622Ай бұрын
Century centurion pool pump leaking. How to fix century pump
@bigtimer6834Ай бұрын
Zack! Pentair really needs to step its game up and partner with Philips Hue for your pool lights. When I as a pool owner spend thousands of dollars for a backyard getaway I want options and 6 colors out of your microbrite pool light isn’t cutting it with no options of custom colors or the ability to individually change each light which probably could be fixed with a simple update within the app with labeling each light with a name. When purchasing a Philips hue color light bulb I get the choice of 16million colors this should be a top priority in 2024 for Pentair. People want options not a set preset colors or modes by Pentair you should leave the creativity to the consumer. I really hope you read this and consider what I am saying. I am not the only one who feels this way and should be addressed.
@falsedragon33Ай бұрын
Your chemical reaction is wrong. H20 is not produced in this. It only comes into play as a solution, when the Hydrogen and Chlorine dissolve in the water, and at the cathode when the 2 negative elections get converted. Below is the correct reactions. * Salt (sodium chloride, NaCl) dissolves in the pool water, forming sodium ions (Na+) and chloride ions (Cl-): NaCl → Na+ + Cl- * At the anode (positive electrode), chloride ions lose electrons (undergo oxidation) and form chlorine gas (Cl2): 2Cl- → Cl2 + 2e- * At the cathode (negative electrode), water is reduced to form hydrogen gas (H2) and hydroxide ions (OH-): 2H2O + 2e- → H2 + 2OH- * The chlorine gas either dissolves in the water or reacts with water to form hypochlorous acid (HOCl) and hydrochloric acid (HCl): Cl2 + H2O → HOCl + HCl In the end you are left with hypochlorous acid (HOCl), a very powerful disinfectant, some Hydrochloric Acid (Muriatic for those who must use that silly name), Hydrogen that will off gas, and the 2 Hydroxide ions. Might want to let people know the Hydroxide ions will raise the Ph, and also buffer it. I always found this a great side effect.
@DeanO-019Ай бұрын
Would be great if you could redo this and add what everything means. Like what's the difference between a Flow or Speed and what you recommend for the different settings based upon size of pool, type, etc.
@user-nx4ko3nk1b2 ай бұрын
How do you fix it from not turning on
@NicholeSonMabale2 ай бұрын
Whats size of the shaftseal? 5/8 or 3/4!
@spersonify3 ай бұрын
You didn’t address one of the most difficult aspects… getting the cartridge off the insert.
@reneegreen59192 ай бұрын
Did u find the answer to your question? I am unable to separate the cartridge from the insert.
@thechambersfamily50782 ай бұрын
Why is it so hard to get the lid off and on again? It is really challenging for me 6:17
@lindanorvigАй бұрын
@@thechambersfamily5078 totally agree with you
@NADOGS11Ай бұрын
I agree, sometimes this is near impossible! I have had to use a screwdriver to loosen the filter at the bottom, but this is not an easy process. Any tips?
@spersonifyАй бұрын
I do get it apart, but I have to use a rubber mallet and bang around it for a while. Then it is still a challenge but eventually comes off
@carlosaceves81863 ай бұрын
☆☆☆☆☆
@kevingray86163 ай бұрын
The new one-piece trunnion on the clamp (the part the bolt goes through) is superior to the old design. THANK YOU for addressing this issue.
@qua-Oliver3 ай бұрын
Muy interesante la información, y bastante fácil de hacer, conexión completa paso a paso y programación; visita mi canal
@lg82154 ай бұрын
How do you add a regular single speed pump? Only devices it shows are Bluetooth devices.
@chillywilly96114 ай бұрын
Thanks dude you’re the best
@rickbuckskin93854 ай бұрын
In the wiring it say L1 an L2 L2 has a post fir a wire but L1 doesn't , but it has a screw. On the old one both had a post to hook up Will this work if I put the wire on the screw
@denisejuergens41455 ай бұрын
My pentair box says revealing white or warm white- we cannot get it to change to warm white as the box says. Our pool builder states others have said the same thing. What’s the trick?
@bobbybaker55116 ай бұрын
Great instructions and good safety procedures. Very appreciated. Everything went as planned. Only thing I would add is use long-sleeve shirt. Fiberglass tank is itching my arms. Other than that, well done.
@danielduran32656 ай бұрын
The shaft seal needs silicone? If so which silicone can we use? I did everything as shown but still have a leak around the shaft seal.
@lannysalisbury66453 ай бұрын
I use GE100% waterproof silicone 2.8 Oz tube. Use the silicone and wait 24 hours before starting the pump.
@jrviade853 ай бұрын
😂 silly boy lol 😂
@frankpv81827 ай бұрын
Penterrible!!!!! I’m a service tech and have been for yrs this is not worth the 3k they want for it
@gregorybrown65397 ай бұрын
That's simple. How does app work.
@user-ue1mi7qw2z7 ай бұрын
You made it look to easy- everything seemed good except your shortcut on the drain valve. The drain valve on bottom has 2" x 3" rounded nut with a 5/8 nut in middle.Which one do you actually turn, and is it counter clockwise? Both are more than hand tight, so I am not sure. My guess is the bigger one, but I'll need a strap wrench.
@Pentairpool7 ай бұрын
Hi Mark, The drain valve has standard threading and will loosen when turned counter-clockwise. You may need to use a set of channel lock plyers to loosen the drain plug. We recommend cleaning the O-ring on the drain plug to ensure there is no debris on the mating surface of the bottom of the filter or the threads the drain plug threads into. You may also want to apply a small amount of a water-based lubricant on the drain plug and hand tighten it. For additional assistance, please contact our support team: www.pentair.com/en-us/education-support/contact-us/pool-spa-equipment-customer-service.html
@nelupopa7977 ай бұрын
Last time when I attempted to clean the filters, the cartridges came out with the bottom manifold. After I washed the cartridges, I wasn't able to push back the bottom manifold where it was. The O ring prevented that. I tried to push harder, still no chance. What shod I do?
@Pentairpool7 ай бұрын
Hello, For this issue you will need to contact your pool professional to ensure the bottom manifold gets seated properly and to check for any possible broken parts. For assistance finding a local pool professional near you, please reach out to us here: www.pentair.com/en-us/education-support/contact-us/pool-spa-equipment-customer-service.html
@user-sr7kz1zk1y8 ай бұрын
Probably a stupid question, but I am new at this salt cell stuff, and I've just inherited the job of maintaining our two pools at the place I live. When everything is working correctly, should I be able to check the chlorine level with a standard test kit? I tested the water today and saw no color for the test. Is that normal, or do I have a problem with the salt cells? thank you
@user-el8uv8hw6d8 ай бұрын
I have been extremely disappointed in the dorado. The plastic is cheaply made compared to the great white vacuum. For how much it cost it should of held up much better. Put a new skirt on too, Not working great at all, 2 years old. Pentair products seem to be going downhill. Just replaced whole system with same Pentair producs about 2 years ago after the initial install in 2007, not 1 problem. Already had to replace the filter cartridge container top due to small crack and difficulty to get the lid on and off. It is still difficult. Pentair what is going on with the company. Your older products were made so much better. Very sad.
@user-jw3vj2vi8w9 ай бұрын
Now this is a helpfull video.. how about one that tell us how to wire devices to it, a heater, pool lights, other devices that I connect?
@shaunasenechal518510 ай бұрын
What position should the handvalve be when the pump is on
@suryaprabhakarsingh570010 ай бұрын
[8/31, 18:42] Needinvsource: Very good because of your contact I was worried my money is not coming I send the link it can't be joined now you have to help me [8/31, 18:46] Needinvsource: Devi is not online since many days no support in pentair now if you provide proper support I can build my big team
@sewerswan842210 ай бұрын
Try doing this in the field
@arat380710 ай бұрын
very easy to do all he is doing on a new pump and sitting on a Bench.
@almamia22910 ай бұрын
This product is junk. Don't buy it, it gets stuck in the drain.
@OHMICOIHO11 ай бұрын
What micro farad for 2hp max e pro Running capacitor?
@Currn11 ай бұрын
Worst pool heater you can buy. Do your research!
@user-vf4js4mf3n11 ай бұрын
the app is not user friendly
@sherresturm81911 ай бұрын
pentair is the WORST USER UNFRIENDLY POOL SYSTEM THERE IS. THE MANUALS TELL YOU NOTHING ON HOW TO UPDATE FIRMWARE OR DO THE WIFI OR WHAT ANTENNA NEEDS TO BE USED . IN FACT THERE IS NO HOW TO ON ANYTHING IN THE "USER" MANUAL AND THE WEBSITE DOESN'T EVEN HAVE A SEARCH ENGINE, ONLY AN INDEX THAT WILL NOT GET TO ANY "HOW TO" AT ALL. IF YOU CALL PENTAIR YOU WANT AUTOMATION AND THEN IF YOU ARE LUCKY , AFTER AN HR YOU MITE BE ABLE TO SPEAK WITH SOME ONE . DONT TRY AND USE THE CALLYOU BACK THEY WILL HOLD YOUR PLACE IN LINE,,,, THEY DON'T CALL BACK