Alright so, I do have a different valve but I bought it on purpose. I wanted a 3 way valve that way I can pull bleach, then change it to water to flush out the system to make it last longer. I do have a red, black , white, green, yellow. Which it came with wiring diagram but trying to understand it is a little tricky. Does anyone have the 3 way valve that can help?!
@johncollins404621 күн бұрын
Ok, so this is an annual cleaning of a metal roof using SH and there is no corrosion problems on the metal sheeting or the hardware? I'm curious.
@allproexteriorservicesllc533821 күн бұрын
Nothing after about 5 years of cleaning it. Wash on!
@johncollins404621 күн бұрын
@@allproexteriorservicesllc5338 Interesting. Thanks for the reply!
@KJfreshh6922 күн бұрын
My issue is I have to take off my downstream injector because no matter the tip I use it still continues to pull . I mostly use the m5 twist to apply and to rinse but I have to go back to trailer and turn it off, unhook the injector, hook the jumper hose back to the reel and start the unit then rinse. It’s a lot to do and waste time. I’m trying to figure out what to do to where I can apply SH/soap/degreaser etc.. then rinse
@allproexteriorservicesllc533821 күн бұрын
This down stream box will work & the Flow Pro will work. It has saved us a bunch of time when we were down streaming for sure. Thanks
@raymondwright387622 күн бұрын
I have a question how come you don’t actually show your full face on camera
@allproexteriorservicesllc533821 күн бұрын
I never thought about & mostly when filming I am on the job looking around. Steadily moving! Thanks
@salaahedd865025 күн бұрын
For the pressure washer, can I use an air compressor because I don't have a water source?
@allproexteriorservicesllc533821 күн бұрын
I don't think so. I think the water creates the suction from the flow. I am not certain & you may want to confirm with Pressure Washer Products. Thanks
@richardpowers420026 күн бұрын
All Pro!!! How’s that thing working out?
@allproexteriorservicesllc533826 күн бұрын
Loving it! Very dependable & the air compressor comes in handy. Thanks
@ChaseWhite-c6nАй бұрын
I've had the same issue with mine. I replaced the seal and still having the same leak with the brand new seal... just curious, did your leak stop all together after replacing yours?
@allproexteriorservicesllc5338Ай бұрын
We have not had any problems since changing the seal. You may want to use some RTV sealant. Be sure to clean the area with brake cleaner first. Thanks
@BCNTRАй бұрын
Can't believe Matthew McConaughey narrates pw videos😂
@allproexteriorservicesllc5338Ай бұрын
I just need a little of his money!! LOL Thanks
@WindowstewАй бұрын
Thanks for all your videos great job!
@brentbrowningАй бұрын
Hey, All Pro. Quick Question, why the 1/4 inch for the soap? does it draw less percent, saving soap? Thank you for the video and info!
@allproexteriorservicesllc5338Ай бұрын
Because you do not want too much soap. Remember, the more the soap the more you will need to rinse. Thanks
@brentbrowningАй бұрын
@@allproexteriorservicesllc5338 ah! Makes sense. Thanks for taking time to reply.
@rondo_with_it5946Ай бұрын
Really helpful stuff, thanks!
@kylecrisman9230Ай бұрын
I bought one two years ago it’s done me well I took the bar off the front so I could easily fit my 250 foot of 1/2 in.
@allproexteriorservicesllc5338Ай бұрын
I was able to squeeze close to 300; of 1/2" hose on the reel. Thanks
@kylecrisman9230Ай бұрын
@@allproexteriorservicesllc5338I don’t always roll my hose up the neatest haha
@FamiliaGuevaraАй бұрын
Can you share a shopping list?
@allproexteriorservicesllc5338Ай бұрын
I do not have a part list unfortunately. Thanks
@Marty-zd2lmАй бұрын
I have 3 on my trailer love them. I visited their facility in Sanford and got excellent treatment !! The swivel comes with a rebuild kit and easy to do! Don’t forget to register the warranty lol. 1” manifold kicks and you will really happy when you finally get the hose hooked up hahaha. No fun! Wiring is fun. Read the directions. It’s not body grounded. It’s battery grounded so I daisy chained my 3 and works awesome.
@allproexteriorservicesllc5338Ай бұрын
I was able to get it mounted & need to upload the video. I did not get a rebuild kit for my swivel in the box. Loving it so far. Thanks
@Marty-zd2lmАй бұрын
Weird. My swivel came in a box and had a new I think o ring..I’ll have to check what it was. Their reels are made in house in Sanford fl right down to bending the aluminum and cnc cutting the mantas. They are world wide ! Love the 1” manifolds and they are short lol
@allproexteriorservicesllc5338Ай бұрын
@@Marty-zd2lm I forgot to mention my manifold is 3/4". Maybe they changed something in production. Keep me posted. Thanks
@Marty-zd2lmАй бұрын
You’re correct it is 3/4” swivel my bad. There are o rings in the swivel that can be replaced quickly by just pulling the snap ring. One is rubber and one is a wear plastic split o ring that’s like a bearing material. Might just be a kit now you have to order. The way these are built tho dag gone thing should last forever lol
@newviewncАй бұрын
Dude. Lifetime warranty?! What’s that mean… if anything breaks on it, they replace it? Surely there is a stipulation on what it covers no??
@allproexteriorservicesllc5338Ай бұрын
@@newviewnc I don’t think it covers a wearable item unless it is defective. Thanks
@josevargas8482Ай бұрын
North Georgia Airless has 3/4 hose reels
@allproexteriorservicesllc5338Ай бұрын
@@josevargas8482 They have a new brand but didn’t have any 18” options. The Titans did not have any stainless steel manifold options. Thanks
@derekgregory3040Ай бұрын
300 ft 1/2” ag hose fits but it is tight
@allproexteriorservicesllc5338Ай бұрын
@@derekgregory3040 That was my biggest concern but it works. Thanks
@truthseeker1532Ай бұрын
I’ve had my Stingray for over a year now and love it. When you realize it has hose guides built in, as well as stackable, plus 3/4” manifold, the price really isn’t that much!
@allproexteriorservicesllc5338Ай бұрын
@@truthseeker1532 Agreed. I use to be able to get Hannay reels for about $800 with free shipping. Now the shipping makes close top the same price. Thanks
@shaferspressurewashing8911Ай бұрын
Great video explaining everything. How much is it?
Congrats. Looking good me man. You do know that you can modify just about anything. And if not, just buy a fire truck. Everything I own is practically modified. You just have to have a go.
@allproexteriorservicesllc5338Ай бұрын
@@tomalley798 Sounds like me modding everything. If there is a will then there is a way. Thanks
@TheFreshRinseАй бұрын
Looking good brother!
@allproexteriorservicesllc5338Ай бұрын
Thanks Mike!!
@northjerseykevin409Ай бұрын
Roughly how many GPM does something like that throw out? That was the first real demonstration of a pump like that. Looking good.
@allproexteriorservicesllc5338Ай бұрын
@@northjerseykevin409 I never tested the GPM yet, but plan to in the near future. I will try to drop a video soon. Thanks
@northjerseykevin409Ай бұрын
Great videos. Do you do much flat work? What soft wash pup do you recommend and if you do do flat work what do you use for that? Thanks.
@allproexteriorservicesllc5338Ай бұрын
Not really too much flat work. We use the AODD for post treatments when we do flat work. Thanks
@northjerseykevin409Ай бұрын
That AR is awesome. Does anything else come close or is that the one to get?
@allproexteriorservicesllc5338Ай бұрын
AR45 is a beast. the P40 comet is an alternative. Thanks
@bigreds9188Ай бұрын
Hey Herb how's it going. It's Steve up here in NJ. I still got this brand new air diaphragm pump if your interested 😁😁
@TheGravygunАй бұрын
How much?
@bigreds9188Ай бұрын
@@TheGravygun thanks for the response. Looking to get $600 there selling for over $900. It's brand new. I'm in New Jersey. You?
@bigreds9188Ай бұрын
@@TheGravygunI can send you pictures if you like. And ship it also if you're not local to me.
@TheGravygunАй бұрын
You need to pull your truck up past the driveway just saying
@allproexteriorservicesllc5338Ай бұрын
Normally I do, but it worked out on this job. Thanks
@tomalley798Ай бұрын
Bleach proof cameras! Where do I get one 😳
@parentsvskids9129Ай бұрын
All pro baby
@northjerseykevin3915Ай бұрын
AR = all right
@mikeree7375Ай бұрын
Excellent as usual
@Marty-zd2lmАй бұрын
Love me some Arnold Palmer. Now I gotta try the lite. No negative comments here. Amazing how “smart” people are when it comes to not their business. You do you bro a make that cheese !
@justinsigman6795Ай бұрын
Bro you’re the best on KZbin. The hell with them haters. I look forward for your videos
@allproexteriorservicesllc5338Ай бұрын
Thanks my dude!
@arnierider7096Ай бұрын
Haven't seen you for a bit, Glad to see your back ,great video video.
@robertfrancisco7750Ай бұрын
I bypassed the gun on my surface cleaner about two years ago because it went bad and kept it that way because it had better flow.
@allproexteriorservicesllc5338Ай бұрын
Agreed on the additional flow
@Player__UnknownАй бұрын
@@allproexteriorservicesllc5338 I wonder if using a DN10 ball valve instead of the trigger would boost the flow? That way you can shut the water off if need be.
@allproexteriorservicesllc5338Ай бұрын
@@Player__Unknown It felt like the flow did improve. Is was a little odd that it would not stop when off the trigger LOL. Just a change in habit. Thanks
@tomalley798Ай бұрын
Not after the footage, just the yarn.
@newerareptilez1379Ай бұрын
great video.
@northjerseykevin3915Ай бұрын
Great video. I often wonder if I could make them myself. Especially when I see the prices online and don’t know how they get away with those prices….. I guess some people can’t build things them selves. Thanks again for the video
@allproexteriorservicesllc5338Ай бұрын
Very easy to build. But agree with the prices online. Thanks
@Grime2Prime2 ай бұрын
What oil do you use in the crankcase?
@allproexteriorservicesllc53382 ай бұрын
We us 30W non detergent oil only in the AR45 pump. Thanks
@peteroconnell18162 ай бұрын
excellent, got me out of my problem . thank you.
@justinsmudde25542 ай бұрын
Great Vid! Thanks bubba
@justinsmudde25542 ай бұрын
It’s drawing 100% more water than chems.
@justinsmudde25542 ай бұрын
Ball valve using 50% more than metering valve!
@RodderTV2 ай бұрын
Can you tell me what type of connection your using to 12 volt battery.
@allproexteriorservicesllc53382 ай бұрын
I used ring terminals to connect to the battery. Thanks
@RodderTV2 ай бұрын
Good. I have all the components.. I need to get a small 12 volt battery. Any advice??? What wire size from battery to wireless unit??? Thank you
@allproexteriorservicesllc53382 ай бұрын
@@RodderTV Maybe a lawn mower battery & 14 or 16 gauge wire should.
@Matt-r3f2 ай бұрын
Im scared to death to let my run without spraying
@allproexteriorservicesllc53382 ай бұрын
I have been off the gun for 10-20 minutes before with no problems. We try not to let off the gun & spray it often while waiting. Thanks
@newwavepressure64782 ай бұрын
Gotta hit it with that hot sauce
@HenryDixon-g6g2 ай бұрын
Great video question I want to change my unloader to a Gp K7 to take away the kick when the trigger is engaged, I am running a Honda GX 690 3000psi pressure washer. At idle what I should see on my gauge? and what should I see when the trigger is in gauged thanks
@allproexteriorservicesllc53382 ай бұрын
Thanks! On the trigger, you should see close to what the pump is rated for. I do not remember the pressure when off the trigger.
@Kyle-ev4fk2 ай бұрын
I didn't see the stucco. How long would it take you to do a two story 3300sqft house? With exterior window cleaning?
@allproexteriorservicesllc53382 ай бұрын
They hd some stucco on the front. A lot of variables on the 3300 sqft house questions. Thanks
@KasonandJosh2 ай бұрын
With the check valve do you have to keep them up right? Or can they be sideways and still work fine?
@allproexteriorservicesllc53382 ай бұрын
You can mount them upright or sideways. Thanks
@tomalley7982 ай бұрын
Pretreat is not a must, but I find that it allows you to move along, especially when it’s a big area. I’ve tried both ways and definitely saves time. Therefore I alway pre and post. ✌️
@backyardgrillmaster29102 ай бұрын
I have one question in in excuse me if I don't know how much water can flow through their can I use a can I change out the quarter inch is that half inch Barb's on there just asking I don't know that's why I'm asking thank you for your time if you can if you answer this I know the videos 3 years old
@allproexteriorservicesllc53382 ай бұрын
You can use 1/2" to 1/4" barb fittings. Not sure if that is what you are wanting to do. Thanks
@backyardgrillmaster29102 ай бұрын
Yes thank you for your time. Love the videos
@backyardgrillmaster29102 ай бұрын
I bought a soapbox for $500 they came with a is for downstreaming injector for the 4 gallons in a power washer but if you just change out the half inch barbs I can use it I can use it for my software 12-volt and Save 750 then buying another one for my Software System I don't mind changing the barbs out from for the soft wash to the downstream for the power washer for the that just doesn't make any sense in my opinion I have two soap boxes that does the exact same thing thank you for your information