What about using CPU AIO liquid cooler for LED cooling ? Have somebody tried it ro replace original small heatsink ?

Can you tell me what screwdrivers did you use to open it

👍 36 db...4 fan artic p12 in my projector ,big work but now is quiet and no problème 1 years

How is the projector today? Did the fan manage to keep it sufficiently cool even with less voltage? I have the V630 and think that it has the same design of the fans, so I would build it again :)

30 fps?

Seemed like, when you took the inner black cover off, you could of just took out the fan. Why did you take out all the mirrors etc ?

It makes no sense that a manufacture of such pricey gadgets won't use quiet fans. I'm almost certain that they know they exist. I have a laser projector with four fans: two 95MM fans, one 105MM fan and another that's directly under the laser which looks to be a 60MM fan. Although I am not certain yet. I tried building a hush box but that didn't help. It simply trapped the heat. The noise was still there. I will mod mine as soon as I get those fans in on order. By the way, you can use a 4pin to 2pin adapter for the fans which keeps you from having to cut and solder.

Thanks for your video! Is it possible to make a completely silent cooling system, maybe by setting up a giant heatsink? Did someone ever try to do that? Thanks.

hab das gleiche setup nur leider noch ne gtx 1060(6gb)

Hi , what is the exact model of ram?

❤❤❤

Very interesting, but, a lot of trouble for most people. Put the projector on the ceiling a few feet or MORE behind you the further away the less noticeable the noise. The real problem with these projectors in the long run is not so much the noise-which will always be there, but DUST. They are not sealed so over time dust will invade the unit. The filter is OK but could BE A LOT BETTER. Perhaps a dual filter-now that would be an easier and important mod. Dust? It's EVERYWHERE. Why do you think they have CLEAN rooms in CPU manufacturing facilities? I wonder if running an ionizer in the projector room would help this?

I really wish your disassembly included more detail on how to take the cover off... it is NOT popping off as easily as you're showing it... the rear ports assembly are stuck fast!

What should be minimum rpms one needs to consider while purchasing new fan

Question: if I live somewhere cold...in your opinion could I get away with just snipping that fans cables? I would run it in a spacious cool area. I know this will shorten lifespan, but the noise is just too bad

Awesome Video, thank you for posting it. Wish I had seen it a little sooner, but its all good. My V600 recently died. No LED light on the Power button, no items power on when plugged in and button is pressed. Took it apart, Cleaned it (wasn't that bad) and reviewed the PSU. from what I could tell, it might not be giving power to the rest of the unit. Does anyone know where I could get a new board? Also, does anyone know if there's any parts of it that would force it to not start if X isn't powered on, similar to the LEDs of a TV?

Hello :) at first I want to excuse for my bad english. I also want to change the fan. I already bought the same fan. I want to ask you, where I can buy the filter.. Greetings from germany

So the MoBo doesn’t need a bios flash? Am curious as I just bought this board along with a Ryzen 7 3800X.

LOLOK3 hi . please DC-DC blower fan (8.5V) is obligate ? i possible juste fan change ?

LOLOK3 greetings from Edwards !!!

It does not let me enable Hdr10+. What can i do?

Fortnite pc

I definitely need to add a filter to mine. Love the image quality the V600 gives me but the internal gets dusty real quick

Great 👍👍👍 Good luck...

Mantab 👍👍👍

looks disgusting

Cool vid

Is it possible to remove the blower fan and replace it with a regular fan? I suppose in order to do this you would need to cut a hole in the side of the projector so the airflow is in the same direction. I’m not sure if a regular fan would produce enough airflow to keep everything cool. If it did, then that may be a great way to remove a significant amount of noice.

Hi guys i have Asus Rog Strix B450 E-Gaming motherboard in my motherboard can i put it sound card Sound BlasterX AE-5 Plus ? Thanks

Hi again, I'm just taking the time to do this right now :) I have a small issue tho, maybe you know this by the top of your head, Google wasn't really helpful. I'm looking really closely and saw that from the four cables in the new fan you have a Red, Yellow, Blue and GREEN cable, mine has Red, Yellow, Blue and BLACK Looks like you are completely cutting Blue and Green and connecting Yellow and Black ? Naturally, I'd just go for the RED and Black wire of my fan and wire them up with the red and black from the pin of the old fan. But you are going for the YELLOW (to red) and black Cable - Should I also go for my yellow instead of the Red? I'm trying to look this up with color coding on wires but it's just more confusing. Maybe you have a quick tip on this, otherwise I'll keep on googling :D Cheers

Nice video

warum verbaut man bitte noch SSD lach

Hey, I'm planning to do the same mod with the same projector. I saw there is a second fan you didn't change in this video, any idea if it's smart to change that one too or any specs on the second fan? Maybe it's also a source of annoying noise? ;) Also, why did you add the DC-DC 8.5 V, what does it do?

Hello, thanks to the video it is very informative. As other people on the comments, I am planning to do same thing on my different projector which is Wimius K1. I am just going to change outflow fan with Noctua fan. I have two question actually. I am going to use 3pin to 2pin adapter instead cutting 3pin cables, do you think it is okay? Secondly, what do you think about put some grease on inflow fan bearing. Would it reduce some noise? Thanks!

Does it still heat up when recording? how is the battery life performance so far

I was thinking the same build, but would it still work okay with the pro motherboard instead?

Wow nice work ❤️ I will try to change both fans and add pwm controll M18 has bad noise

lmfao its actually 4x zoom and they advertised it as 100x zoom even though thats just digital zoom

Great video! I am having trouble disassembling mine. I have taken the all of the screws out but still feels very secured near the ports. Any tips for getting the case off without breaking it?

Doesn't work on S20 even though KZbin app shows HDR

Clearly you didn’t watch the verge’s tutorial. Where’s the table?

Check if the LED are not being overdrived too. A lot of these chinese projectors uses 120W unjusted drivers to power 100, 80 or sometimes even 50W LEDs. Sometimes you need to change the precision trimpot to be able to set the right current

I want some advice. Is it worth it to get the X570 Aorus Pro or the Aorus Ultra over the Elite like yours?

I am color blind.

Is the x570 Aorus gigabyte wifi compatible with a 3060 ti graphics card?

Hey can I use aorus b450 wifi motherboard with this exact cpu and gpu? Please reply

Thanks for the Video, Currently i have a Excelvan CL720 Projector, and i did nearly the same modifications like you. Outtakefan Noctua NF9 + DC-DC Converter with Potentiometer to control the fan-speed from outside. For my Projector there were also a video to change the blower fan to an axial fan, with modification of the airflow (cone funnel), but this damagen my frenel lens or lcd panel (small black spot on one corner). I was also looking for an replacement for the axial fan, but without results. But during my optimization i recognized that the most noise came from the airflow, and not from the fan itself. My setting is also at 8.5V in the winter sometimes lower. Now it is functional and stable since 1 year, but the resolution 720p is not optimal to watch pictures from our Smartphones. Thats why i think about to change my projector to an Vankyo V630, because its a cheap Fullhd projector with the possibility to reduce the noise. Does anybody have problems after the modification?

Incredible my friend, I have the same projector model (branded AUN M18, but it's same stuff) and I replaced the original fan with the exact same model of noctua fan you used! I did this hack during the days of lockdown here in Italy, about 10 months ago and the projector still works great! Just I didn't touched the inlet blower because I wanted to avoid the possibility of overheating the lamp, limiting the blower speed as you did (if I understood well). Would like to find a quieter inlet blower as replacement, but it seems to not exist with the technical features of the original one. Anyway just installing the noctua is a great improvement in my opinion. It's really funny to see that in another part of the world a random guy like me did pretty much the same hack I did. Where are you from dear fellow?

awesome setup!!!!!!

shes beautiful