xTHEYCALLMExGx

Пікірлер

@KingVincemoto Ай бұрын

I wish you could have discussed how much to shave down on the plastic

@elizabethrose9655 2 ай бұрын

I dont understand how with the wire what did you do with the wire?

@GhadSpeed 2 ай бұрын

Yeah bro I reinstalled everything and I have zero tension to my clutch lever

@angelcarlos2209 Ай бұрын

Did you figure anything out

@GhadSpeed Ай бұрын

@@angelcarlos2209yeah it was the arm that goes into your clutch case and it locks into the shaft rod.

@Txefo 2 ай бұрын

Hi, I love your channel! I’ve watched several videos because I also have a Kawasaki Ninja 400, and I really like the red fairing. Could you tell me where you bought it? Is it from AliExpress? Regards.

@xTHEYCALLMExGx 2 ай бұрын

Thank you and the fairings are OEM. Its a color from the 2001 models

@Txefo 2 ай бұрын

@@xTHEYCALLMExGx Thanks for the quick reply. But, could you tell me where to buy them? In which store or website? Regards

@PandaOG89 3 ай бұрын

Do you have a video on the Norton risers? I was thinking about getting a set and was wondering if I should get them or buy a set of rear sets. I’m leaning towards the Norton risers.

@xTHEYCALLMExGx 3 ай бұрын

I can make one. Since there’s not many or any on it.

@PandaOG89 3 ай бұрын

@@xTHEYCALLMExGx That’d be dope! There’s really not. Thanks for the videos and reply!

@fathah7205 3 ай бұрын

Yo i gotta er4n and absolutely minimal details and reviews on the internet lol 😵‍💫 love the bike tho ❤

@UltraTricksByRony 3 ай бұрын

I watched your channel deeply, I found that your channel is not going viral So I can help you in this regard,Hope you will reply to the message.

@Michenseki 4 ай бұрын

Although I got my M1 enforcement when I was 18, for various reasons, I never ended up getting a bike. As a lifelong stick shift driver, I still want to learn to ride, but I’m now 35. Am I too old now? Haha…

@xTHEYCALLMExGx 4 ай бұрын

To make you feel a little better. I started riding in May 18th, of 2021. It was also When I first bought my 2021 Ninja 400 with 0 miles. I am now 36 as of July 16th. You're still good. If you want to ride, then go get that bike! My friend's parents just started riding not too long ago either. They're in their 40's. They also have no riding experience. But they wanted to ride because of their daughter and me going on adventures. Now we have "family rides".

@arousemedia 4 ай бұрын

Love it !!

@jerryglennie5375 5 ай бұрын

If you still want to use loctite for the rotors go with the blue.... 243? Its more of a gel but it does help prevent most bolts from vibrating out of places without risking a permanent fastener lock. Small tools woll be the most you'll need

@xTHEYCALLMExGx 5 ай бұрын

Yeah I'm definitely going to be using blue. Even the guys from the local motorcycle repair shop here was absolutely confused on why red was used. It's a maintenance part that will be replaced. Just blue and torqued to spec is all it's going to be needed.

@brzo 5 ай бұрын

Would this work for the Ninja 300?

@jerryglennie5375 5 ай бұрын

Hey G if I remember right the 400 wheels are aluminum? If so find a small map gas torch and focus it on the bolt itself to prevent distorting the threads and warping the rim.

@xTHEYCALLMExGx 5 ай бұрын

I’ll give that a shot when I get the new wheel mounted. Because that wheel is still good to use. Would like to salvage it instead of thrashing it.

@KingVincemoto 5 ай бұрын

Ayy bro how much did you get ur domino grip? I cant find a real domino grip and R6 tube out here in the Philippines bro it sucks!😢

@xTHEYCALLMExGx 5 ай бұрын

I bought mine for like $20USD. The R6 grip I found on Ebay from a 2008 for like...$20USD? I can't imagine how hard it would be to find parts in the Philippines. Especially high quality brand name parts.

@KingVincemoto 5 ай бұрын

Ride safe brother

@KingVincemoto 5 ай бұрын

Bro yu got people out here in the Philippines??? Thats wassup bro!

@xTHEYCALLMExGx 5 ай бұрын

I do. Will be actually trying to buy a bike so I can ride in the Philippines. Deciding on the Kawasaki ZX25R, Honda CBR250RR, or a Kawasaki Ninja 400. Still deciding.

@KingVincemoto 5 ай бұрын

@@xTHEYCALLMExGx I would recommend getting a Ninja400 so u can get on the freeway

@xTHEYCALLMExGx 5 ай бұрын

@KingVincemoto yeah I saw that when I was there last year. 400cc minimum. But….there’s a chance I may just get a 600 or 1000 😝. But I will have multiple bikes when I’m there. Since I’ll have a house there.

@CrunchDramaNetwork 6 ай бұрын

This may sound dumb, but what's the difference? Clip ons vs stock

@xTHEYCALLMExGx 5 ай бұрын

Not dumb at all. The aftermarket clip-ons will give you more adjustability and cheaper to replace. Cheaper as in, you can just replace individual components of the aftermarket clips on instead of the whole set like the stock clip-ons. If I dropped the bike and bent the stock clip-on, I would have to pay $105 for a brand new OEM. If I dropped the bike with the Woodcraft clip-ons like in the video, I just have to replace the actual bar for $11-$15.

@CrunchDramaNetwork 6 ай бұрын

I have a 500, brand new. I'm very, very new. Like only 20 miles new. Well yesterday I tried to blip the throttle and it almost ended in a disaster! It threw me back and almost popped a wheelie. It's a scary, but I didn't panic and saved the bike

@xTHEYCALLMExGx 5 ай бұрын

Give it some time for the bike to break in first. It's very good that you didn't panic. Calm panic is better than full on panic. Give it little blips at a time if you're downshifting until you find the right amount to make the downshift smooth. Low speed and low gears will require more blipping than saying going from 6th to 5th from what I can tell you. But you're gonna have to go on feel with that one. You'll find it.

@josh_ari 6 ай бұрын

The major downside to an ecu reflash on a new bike is the voiding of your warranty

@dirkguzman7955 6 ай бұрын

P r o m o s m ☀️

@JuuustYeet 6 ай бұрын

would it be possible to trim/sand the throttle tube instead of the housing? I'm a bit nervous about modifying OEM parts

@xTHEYCALLMExGx 6 ай бұрын

You can try. The OEM part that you're sanding will be more preferred and it's really not that much to take off and the housing will still be 100% functional. You're only sanding enough to make sure the tube clears the housing's inner track to prevent the throttle from sticking. But if you get an earlier R6 throttle tube. You don't have to modify anything. I got the 2008 R6 tube due to being bigger in the cam and offer more benefit (meaning less effort to go full throttle). That requires modifying. I believe the 2006-2007 is the one you don't need to modify.

@irvingacosta7853 7 ай бұрын

Where did you order the throttle tube from?

@xTHEYCALLMExGx 6 ай бұрын

I actually looked up the part number for a 2008 R6 throttle tube. You can also order it from Norton Motorsports.

@irvingacosta7853 6 ай бұрын

@@xTHEYCALLMExGx yes I liked it up! Messed up the first time I got the r6s then I order the right one the 2008 r6 and let me tell ya” my 400 ninja it’s more responsive I love it. Next thing I want to do is speed stacks any recommendations

@xTHEYCALLMExGx 6 ай бұрын

@irvingacosta7853 I’m going for TST’s velocity stacks as they give more top end compared to the Norton Motorsports stacks which gives the 400 power across the powerband.

@irvingacosta7853 6 ай бұрын

@@xTHEYCALLMExGx will I need dyno orflas after swapping the stack??

@ForeignLifestylestory 7 ай бұрын

can i get my ecu flashed there to.. im still in the Philippines.. i can bring my ecu when i go back to the states

@ForeignLifestylestory 7 ай бұрын

i got the same on my falcon 400cc...i hate riding in the city.. my dead spot is between 2000k and 3000k

@diegosaldarriaga3615 7 ай бұрын

Hello bro, good contribution, did the accelerator become somewhat hard or rough after changing?

@StroomG 7 ай бұрын

Hey can you give use a side profile shot of your ninja 400 with the aggressive clip ons? Would love to see the ergonomics from the side; even a fly by would be super cool!

@shidoshii1474 7 ай бұрын

pretty coo exp. I still have not had a chance to attend this event yet going on many years now.... This is the year to do it for me... thanks for sharing.

@evanfinley2198 7 ай бұрын

also got barnet clutch coming in mail.. how did u determine clutch pack order

@allahjoseph 7 ай бұрын

These should come pre-drilled, but thats straight lol

@kharri2476 7 ай бұрын

Great video highlighting tank grips, but riding and drinking totally don’t blend. That was my big lesson in motorcycle safety course🤔.

@xTHEYCALLMExGx 7 ай бұрын

Thank you and yes. You are right. But I always sober up after finding a new food establishment. Always a couple cups of water and at least an hour before heading out again. Even with my insane tolerance levels…I don’t want to risk it. I rode and drank before and it was not a fun time and got an ear full from my roommate.

@Ashfurxx 8 ай бұрын

Hey bro idk of you remember me, but i had the 8thgen we used to talk alot. I got i to bikes and after watching your vids i ended ip getting a ninja 400!

@xTHEYCALLMExGx 7 ай бұрын

Now I do. Didn’t recognize you. Hopefully you’ll learn and have the Ninja 400 teach you. It has a lot of lessons to teach you about turns and riding fast. Don’t let the 45hp and 110mph speed limit (GPS accurate) fool you. I outridden friends on the back roads and they are on 600s and litre bikes.

@DaggRevs 8 ай бұрын

I love that red paint! Damn! Nice video 👍

@xTHEYCALLMExGx 7 ай бұрын

Thank you!

@draguniseffect 8 ай бұрын

Ive only ridden a 50cc scooter so far. But I'll add to 9:12 with train tracks; especially if they curve on a curved road.

@xTHEYCALLMExGx 7 ай бұрын

Definitely a much different experience when riding in the rain!

@fookemon3326 8 ай бұрын

New rider here (dont have a bike yet) planning on getting a 400 but i dont really like the color schemes out of factory. How did you get a red one??

@xTHEYCALLMExGx 8 ай бұрын

The Passion Red scheme is from the 2021 year. Each manufacturer releases two or three colors for each year.

@cantbeserious9802 8 ай бұрын

What parts did you upgrade to for the clutch?

@xTHEYCALLMExGx 7 ай бұрын

I upgraded the friction plates, the steel plates, and the clutch springs. The factory clutch is just no good once you start getting used to your bike.

@KingVincemoto 5 ай бұрын

I feel like my bike is not as punchy off the line or I might just be trippin or I probably got used to the power of the bike! I dunno

@xTHEYCALLMExGx 5 ай бұрын

@KingVincemoto the stock gearing is set for a balance of acceleration and top speed. I’ve recently done a +1 in the rear sprocket. Contemplating on making a video about it. Bike is a lot more punchy compared to stock gearing. I can power wheelie in 1st gear.

@KingVincemoto 5 ай бұрын

@@xTHEYCALLMExGxyou should bro!

@inglesdiretoaoponto2852 8 ай бұрын

Nice riding! Cheers from Brazil!

@xTHEYCALLMExGx 7 ай бұрын

Thank you! Cheers from Washington state!

@tysoncott7402 8 ай бұрын

Looks like a super fun day/ride, have a great riding season 👍🏍️

@xTHEYCALLMExGx 7 ай бұрын

It was fun and a rideable 65°F weather!

@phillyrepresenter 8 ай бұрын

Yooo I live here!!! Been wanting to buy a ninja 400 for a while because I work on orcas! Thanks for the video!

@xTHEYCALLMExGx 7 ай бұрын

Sorry for the late reply but it’s a great commuter bike and a great bike to carve up the backroads. Hope the video helped!

@phillyrepresenter 7 ай бұрын

@@xTHEYCALLMExGx The video def helps and I plan on taking a class in the near future. I’ve been looking online but I have not seen any of the ninja 400 for sale around the area. Do you have any recommendations on where to look?

@xTHEYCALLMExGx 7 ай бұрын

@phillyrepresenter they’re out there. It’s just that the Ninja 500 (essentially a 450cc) is taking over and replacing the 400. You can blame Euro Emissions. So if you can’t find a 400, a CF Moto 450 is the next best choice or if you want to stick with Kawasaki, you can go for the Ninja 500 or the ZX4RR.

@Freedomone153 8 ай бұрын

Not looking ahead

@pancakesallday7047 9 ай бұрын

Awesome video bro!!! Some good laughs with great info 😂

@CTr6928 9 ай бұрын

Came from reddit, keep it up :))

@xTHEYCALLMExGx 9 ай бұрын

Thank you. Might start making videos again.

@cartergermano 10 ай бұрын

gonna get a ninja 300 this summer, rlly nervous, at a stop light can i stay in first gear and im also scared about stalling all the time

@xTHEYCALLMExGx 9 ай бұрын

You got this. You don’t have to be in 1st gear at a stop light. I go to neutral once the vehicle behind me has come to a complete stop. You’ll stall at first, maybe a lot, depending on who you are. But you’ll get the confidence in time. Take your time and get used to the riding.

@shibapatrol801 11 ай бұрын

I would argue that a good set of rear sets are more important that the ECU flash tbh. Stock rear sets are set so low, if you take a corner that has positive camber you risk scraping the footpeg pin (not really sure what it's called) and it really messes with your confidence taking corners. Throttle tube mod is also another one I'm not entirely sure makes all that much of a difference (having done it myself) Another school of thought is that wider range of motion means that the rider has better input control of the bike and thus makes adding small increments of throttle easier in situations like cornering.

@alp3781 11 ай бұрын

I own the HJC 90S Carbon for 2 years now and I love it. Great helmet for the price. Very lite too. I use to be a Shoei guy and I switched.

@jxncel 11 ай бұрын

i would love to put this beautifull cap on my ninja 400, but there's some evil ppl that would put shi in my tank to mess my day so i can't do that rn great video tho♥

@sebastianfernandez7459 Жыл бұрын

Eso no da ninguna carga aerodinámica😅😂😂

@lovingmylifeasIage6741 Жыл бұрын

I had a 2021 MT07. I traded it in on the ZX4RR. I just love this bike so much better. When I get out on it with a full tank of gas, I don't want to stop until the gas light comes on. I've only had it for about a month and still haven't had it flashed or a different exhaust. I did get frame sliders and a radiator guard. The stock tune is ok for me because I'm never taking it to the track and it is just fine on my curvy country roads. I'll drop down a couple of gears and pass anything that I need to pass. When it gets up to 11k it kind of hits a power band like in a 2 cycle. Just love riding it around town and in the country.

@arousemedia Жыл бұрын

loved this !!

@Jerry26crazy Жыл бұрын

Link to helmet gloves Bro, you laid this video down but you forgot the most important piece of information; the link to the clutch and plates! Can you drop those too?

@kwicksandz Жыл бұрын

ive been shpping around for a second bike and the z900 seems like a good option for a modern sportyish bike with ABS. dont trust myself on a gsxr 750 or r6 and z900 is cheaper and more available than a zx6r

Ең жақсы KZbin

Пікірлер