3 ай бұрын
5 ай бұрын
5 ай бұрын
5 ай бұрын
5 ай бұрын
6 ай бұрын
6 ай бұрын
6 ай бұрын
6 ай бұрын
9 ай бұрын
Пікірлер
@Snattle_Rake 2 күн бұрын
How did the grip hold up on you guys? I had the the same fitment "issues" on my Hogue grip and it broke after 15 rounds! The installation went exactly how you two showed in the video. I'm concerned the same thing is going to happen when I receive my second one, and I'm not sure how to prevent that in case I did something wrong.
@58Alpha 2 күн бұрын
hmm, that is quite interesting. How did it break, the wood split? I am sure Hogue would have a warranty. For us, the grip has not broken or anything, it's still really nice and secured.
@Snattle_Rake 2 күн бұрын
@@58Alpha It did split at the grain. Directly under the trigger guard. I've already contacted Hogue and they are sending a replacement. I'm just concerned about the same thing happening to my second one as nothing significant was different between what I did and what was done in this video. The grain was a little different from all the other grips I've seen though. The entire grip had parallel grains, as opposed to others where the spot under the trigger guard loops around. If I'm not mistaken, that strengthens the wood overall
@58Alpha 2 күн бұрын
@@Snattle_Rake Ah, then I would focus more on that grip design than how you installed it. I'm sure the 2nd grip will do better then.
@homayoonjoudat3713 2 күн бұрын
Nice job! but could we get the power for the monitors from sources other than the main circuit breaker panel ... like from the plugs on the wall?
@58Alpha 2 күн бұрын
From an individual plug? That's gonna be different since many outlets are on the same circuit, and you could check the whole circuit that runs the plug you are curious about. Other than that, I'd recommend something like this which I use for individual plugs: amzn.to/3SebDEG I've used this for a couple years now and it's been awesome.
@hemlock1013 4 күн бұрын
Zsr ammo correct curious making sure this stuff is safe?
@Tatu223 5 күн бұрын
Thank you best info 😎✌🏻
@58Alpha 4 күн бұрын
Awesome, glad someone took something from this video.
@Tatu223 4 күн бұрын
@@58Alpha found it really is a 12 shot not 20 jams after 12
@58Alpha 4 күн бұрын
@@Tatu223 haha 😅 true sometimes. Idk if that's just the nature of a CO2 gun or not
@Tatu223 4 күн бұрын
@@58Alpha I’m good with it just learning so ccw in my future lol
@StatisticallyScrewed 5 күн бұрын
Just randomly plugging and unplugging harnesses 😂
@58Alpha 4 күн бұрын
Sometimes trial and error helps hahhaa
@StatisticallyScrewed 4 күн бұрын
@@58AlphaOn new electronics it's dangerous. Pulling harnesses and unplugging while the unit is powered on can cause serious issues. Got lucky. I'm recording a new installation video for the manufacturer right now. They are using your link for their tech support. Lol
@58Alpha 4 күн бұрын
@@StatisticallyScrewed oh nice haha good luck, I had so many issues. I do not generally do so much plug and unplugged, let me know how it goes.
@58Alpha 4 күн бұрын
@@StatisticallyScrewed this video is long just to expose all the problems and issues I had. With Phoenix automotive, that unit was so much simpler to install.
@StatisticallyScrewed 4 күн бұрын
@@58Alphayou dont run this unit anymore ?
@clintonfella9195 10 күн бұрын
One of the most under rated guns. I love mine far more than my Glock.
@58Alpha 10 күн бұрын
100% man. Sold the only Glock I had too.
@BaseballFan-hw7nx 10 күн бұрын
Thank you for the video. It helped a lot. Do you remember you had Error Code #3 with this problem? Mine is an exactly same model as yours and has the same problem now (water in it) with Error #3.
@58Alpha 10 күн бұрын
Oh man. The exact error number I cannot remember. I'm sorry. Whatever I had in the video is the error..I'm not sure if I mentioned it.
@horuseyez77 10 күн бұрын
Well done video 👍 thanks
@58Alpha 10 күн бұрын
Glad it was helpful!
@TheWilferch 10 күн бұрын
How do you fit the closure plate on your main panel?....seeing that the new meter panel alongside has 2 wire-tunnel projections placed right over the flange-face?
@58Alpha 10 күн бұрын
I actually made a cut out for it with a Dremel
@User-hv5wm 11 күн бұрын
If you google it says lithium lasts way longer than Duracell in EVERY SINGLE device except a flashlight lol. But yeh energizer lithium is by far the best battery on the market.
@MrAlfredoloera 11 күн бұрын
Thank you for the video, does your factory back up camera work with the new unit?
@58Alpha 10 күн бұрын
Yes, the backup camera does work, plug and play. It was easy.
@Robert-kb8rl 11 күн бұрын
It’s a short-barreled shotgun - who cares about sights?
@58Alpha 11 күн бұрын
Umm it's standard size and you still have to aim a shotgun
@dat-1959 12 күн бұрын
Thank you
@58Alpha 11 күн бұрын
You're welcome
@dat-1959 12 күн бұрын
It was good but
@58Alpha 11 күн бұрын
But what?
@ryanfletcher317 13 күн бұрын
very helpful data! ty
@58Alpha 13 күн бұрын
Thanks, I'm glad you got some helpful info from it!
@ryanfletcher317 13 күн бұрын
what ammo have you found that has better (lower) recoil? Is there an ammo that you prefer that is better then this one? (low recoil, low weight and high speed) Thanks!
@58Alpha 13 күн бұрын
Yes, the ammo I found that I like the best for low recoil is Defender Pro Series. It is not high speed though, I use it for competition. It will be hard to find a low weight, high speed round that has low recoil. But I have various youtube videos testing for recoil on 9mm rounds if you want to check them out. kzbin.info/www/bejne/kIWWh4SrotWag9k
@ryanfletcher317 13 күн бұрын
@@58Alpha excellent! Ty for the advice!
@TheWilferch 14 күн бұрын
Nice install.....especially since you are "reading" each 120V leg of your city 240V supply. Question: now that you are monitorong the 2 x 120V legs on city power......why didn't you use a duplicate set of 2 meters for the generator? In my view, the "health" of each individual generator 120V leg might be more important to check if it's good....compared to the need to check each 120V leg of city power.....no ?
@58Alpha 10 күн бұрын
That's a good point but I figured I'd want to know the total voltage at the generator and I also don't use the generator every day.
@chillmonkey6782 14 күн бұрын
Those flowers are relaxing lol
@andrewgonzales4278 14 күн бұрын
Did you by chance measure the ammo? I need less than 1.5 inches long for my cz lol
@58Alpha 13 күн бұрын
Hmm. The length of the bullet and casing? I didn't measure it, why do you have to be 1.5" or less for a CZ?
@Bowfella 15 күн бұрын
1100 for a 200gr is still not even close to a fully loaded 10mm. I get the cheapest 200gr blazers I can find and even they go 1070fps.
@lynnkramer1211 15 күн бұрын
You might could devise a sling holster to strap it to across your chest. Here's the thing, you need to have a minimum of 10-20 miles.
@larryjanson4011 15 күн бұрын
in cal this gun is a felony. called a short barrel shotgun. set it up in ONLY 45 colt i could buy one. neet gun maybe in other chambering. but the new penalty tax of 11% on-top of the other fees and taxes-yes you get to pay a tax on other taxes-.
@sikcobra 17 күн бұрын
Tf? Did I miss the KSG part? Did he shoot it? 😂
@58Alpha 16 күн бұрын
No KSG Shooting in this video, was used as a prop.
@sikcobra 16 күн бұрын
@@58Alpha yeah, see the description now, my bad
@jodyshutt1911 18 күн бұрын
Have you ever realized when you hold you catching glove in the position you carry your ,you have very limited down ward motion an quickness to catch a 100 mile per hour shot. JUST WONDERING. 😂
@58Alpha 17 күн бұрын
Ah that's interesting. Which point of the video did you see that so I can reference it? I wish I could play against some 100mph slapshots though. No one is shooting that fast in my league.
@dogman_ 19 күн бұрын
Rule of thumb. 22lr pistols or rifles are ammo picky. It might run in one pistol, but that doesn't mean the next pistol is going to like it.
@58Alpha 19 күн бұрын
Yep, that is true. I find that Norma Tac22 is terrible in this gun, but the ammo is great in other platforms.
@hoot1141 19 күн бұрын
You may have said it but I skipped around a little bit. What holster are you using?
@58Alpha 19 күн бұрын
I am using this holster that I got from Sig's website when I ordered the X5 X-change Kit www.sigsauer.com/320-xfive-owb-comp-tac-holster.html
@hoot1141 18 күн бұрын
@@58Alpha Ooohhh, it’s a Comp Tac holster. Awesome. Thanks man.
@58Alpha 18 күн бұрын
@@hoot1141 yep, simple and works great! Great attachments and adjustable retention
@renelopez2244 19 күн бұрын
I'd like to see that pistol set up with a LPVO. Maybe a trigger job and hand load 45lc ammo. Make it a budget bench rest pistol or hunting pistol
@brudamiranda3314 20 күн бұрын
Cool video! Good testing! I just have the d60. I used it once wiped it down and stored it it's a beefy mag
@58Alpha 20 күн бұрын
Yeah, in that case, I think i'd go with the vertical option from ATI Schmeisser actually. But if the drum works better for you, do it!
@antonlaswan9091 21 күн бұрын
lol the into bumper
@58Alpha 21 күн бұрын
lol what? the Bumper?
@babacloanta1470 22 күн бұрын
❤ Excellent video !!! 🤗👍I intend to modify a 9mm fcu into a 10mm fcu but i have a technical question for you all. Does anybody know what's the exact dimension of the Sig P320 Xten ejector ?!? Is it the same dimension with the 45 acp ejector ?
@58Alpha 21 күн бұрын
I'm glad someone found the video useful. I have some calipers that I could measure the X-Ten Ejector, but what would you like to know, what measuring points?
@JohnGagliano-l3r 24 күн бұрын
Steal casing never in my guns each to their own
@58Alpha 24 күн бұрын
If your gun is made of softer steel than steel cased ammo and is going to get ruined by steel cased ammo, well then you got a cheap gun. But you're right, to each their own.
@danielv.9236 25 күн бұрын
still working ?? recommend?
@58Alpha 24 күн бұрын
Both still work or what exactly is your question referring to?
@Renrondog 26 күн бұрын
Why am I watching somebody that doesn't even know the "Rust" is a primer sealer installed by the factory? I'm out......
@58Alpha 26 күн бұрын
why isn't it consistent and why didn't I see the "PrImEr SeAlAnT" at the store when I bought it?
@FilmJunkieOutdoors 27 күн бұрын
Does not come with cherry bombs now. Actually pissed
@58Alpha 27 күн бұрын
Yeah, I saw that, that freaking blows...i'm glad I got in on it in November then. I'm quite new to Suppressors, so I lucked out. Saw the deal and said let's try it. I found some cheap cherry bombs at Optics Planet and Primary Arms. Hope that helps! I used coupon codes too.
@p.scottrice8235 29 күн бұрын
Can it interfere with calls on an iPhone? Thanks!!
@58Alpha 29 күн бұрын
What do you mean?
@p.scottrice8235 28 күн бұрын
@@58Alpha Can I make and receive calls from my iPhone like I do now with the OEM head unit? Is there any issues with ApplePlay? The screen looks great but what are the cons?
@58Alpha 28 күн бұрын
@@p.scottrice8235 I have some cons I mentioned in the comments section here but there aren't any issues with using the iPhone with the unit to make calls.
@insanogeddon 29 күн бұрын
Better with TSS Turkey Shot and after a shot you can press the release and whip the gun barrel down and the breech will open and kick the cartridge out. Bonus points if you catch it!
@jguest09 Ай бұрын
When the bolt is locked to the rear does the piston slide up and down cause mine does
@58Alpha Ай бұрын
We have noticed it does love but I'd have to check, it's my friends gun so I'm not 100% positive
@andrewfong4216 Ай бұрын
I wanted to see a demo of the WX radio function. We use MURS radios in my scout troop, and I want one that also has a Wx radio so I don't have to carry my ham radio also.
@58Alpha Ай бұрын
Sorry about that, but yes this has Wx function. I just don't use it really.
@ericdustin658 Ай бұрын
I would not make a habit of having rounds in the gun if you aren't shooting! Always have the gun clear/cold if youre not on the line!~ Best of luck
@58Alpha Ай бұрын
I'm filming a video here and being aware of firearm safety. I'm not on the line in a competition, in which case, you're right, I am always clearing the firearm completely.
@BlackButterflyAmmunition Ай бұрын
Awsome video! I honestly felt that same way when I developed this load a few months ago. Sooooo much fun shoot and made me like my .308 again! Thanks again for the great video and let us know next time so we can send you some sweet SC Honey to try with our ammo! Nick The Owner
@58Alpha Ай бұрын
Hey no worries! I liked the ammo so much, I already made a 2nd order that's arrived. I'll let ya know about the honey! I'll probably plan a couple more videos with the ammo too once I get things settled in with the rifle like the scope and stuff.
@BlackButterflyAmmunition Ай бұрын
Is that the 26” bolt?
@58Alpha Ай бұрын
@@BlackButterflyAmmunition yes, 26" bolt action palmettostatearmory.com/steyr-arms-pro-tactical-308-win-bolt-action-rifle-26-barrel-black-56-343g-3g.html
@BlackButterflyAmmunition Ай бұрын
@@58Alpha I’m adding your video to our product page to drive some traffic to you. Teamwork makes the dream work! 😂
@58Alpha Ай бұрын
@@BlackButterflyAmmunition Oh nice, thank you very much! Glad I found your ammo too! Hope you get a lot of sales, it's pretty good stuff.
@icanfly2677 Ай бұрын
Notice your gun is 30 degrees to the left of the center? Now, when you pivot right, you will drive past center & lose time correcting. Also, how can you carry like that for real world?
@58Alpha Ай бұрын
Well the video was made when I was quite new to steel challenge. I don't get what you mean though for 30degrees left of center, can you tell me where in the video you're referencing? Also, I don't carry like this in the real world, it's only for competition purposes
@icanfly2677 Ай бұрын
@58Alpha To me, if your hands are up, you're practicing for real world? Why change things? If the muzzle does not come out straight, it has to be corrected. More often, over corrected taking time to align. When you draw these days, what's your barrel facing? Do it slow & have a look.
@icanfly2677 Ай бұрын
@58Alpha I hate to be a Monday morning quarterback. I teach competition shooting & often, there are just small adjustments to make someone faster. Please understand I am not criticizing. I admire your goal & the fact you post videos. This was steel challange. In IDPA, the holster aligns with the seam of your pants. Just some good advice, friend. Keep up the good work.
@58Alpha Ай бұрын
@@icanfly2677 Ah I know what you mean, you mean it's 30degrees on my belt. Yeah, in steel challenge, it's not limited to having to be exactly aligned with the seam of my pants. When I was thinking real world, I thought you are meaning conceal carrying, which I carry AIWB. I have the gun holstered in this location on my belt so that my hands get quicker on/to the gun. I appreciate the insight of your feedback, always trying to find things to improve upon. This video is now getting a bit older and so I would change some things in this video if I had to do it over again.
@someramdomguy99 Ай бұрын
Is it necessary to completely take the firearm apart or would it be fine field striped?
@58Alpha Ай бұрын
Field strip is fine as long as you get all the water out afterwards or displace the water by doing ultrasonic lubrication
@JimiGosu Ай бұрын
I've seen it shot accurately at 30 yards with iron sights. Your red dot may be misleading you.
@58Alpha Ай бұрын
Yeah, I am thinking the same thing.
@THaughton 15 күн бұрын
@@58Alpha I haven't personally shot this firearm but I've seen others do very well with it with just the stock sights. Even to 50 yards or better. I'm fairly sure I wouldn't do that well at that kind of distance but it's nice to know that that's possible.
@cs2816 Ай бұрын
Once you drain the oil, take the ValvoMax off. How much leftover oil comes out? The threads look like they extend into the oil pan. So, maybe a cup of old oil stays in the pan?
@58Alpha Ай бұрын
Interesting take. But I don't think it leaves behind a cup of oil, the drain plug is the same length as the original drain plug.
@forrestthompson7209 Ай бұрын
No body gonna talk about the intro song? 😂😂
@DDDYLN Ай бұрын
For a woods/black bear pistol, I'm currently trying to decide between the Sig P320 XTEN, and the discontinued Springfield XD-M OSP 10mm 4.5" Threaded (5.3" barrel length). Those are the only two TRUE full size 10mm pistols, that seem like theyd be okay to CC. I currently have a Gen 4 Glock 40, and a bunch of of really heavy 10mm 1911's. The G40 is really only suitable fir chest carry, or OWB carry.
@58Alpha Ай бұрын
Ya a sig x-ten for my body size would be tough to conceal AIWB which is how I prefer. But open carry with a jacket is completely doable as CC
@DDDYLN Ай бұрын
This is pretty good range ammo. I love how most tests of 10mm ammo, are typically from the G20. Then the tester goes into a tirade about how weak the ammo is, without ever mentioning that the numbers on the box are for 5 in barrels, not 4.6"!
@58Alpha Ай бұрын
Exactly 💯 good point
@ramenramrod Ай бұрын
4:58 Thank you so much for demonstrating! That was a burning question I had for this charger before I bought it. 🙏🏽
@58Alpha Ай бұрын
Glad I could help!
@janstrehl9420 Ай бұрын
Energizer better
Ай бұрын
Energizer Ultimate Lithium is for slow drain devices like smoke detectors, and so ill-suited to high drain applications like a flashlight. In that case, seek Ni-MH rechargeables or an 18650 Li-ion (NMC) flashlight because throwing away alkaline batteries all the time gets to be expensive and wasteful.