ari kardasis

Пікірлер

@tomkiehfuss Ай бұрын

Really cool! Great stuff! Love the drill lift mechanism. Love the dogs at the beginning of the video.

@joedance14 Ай бұрын

Noticed your video re table saw storage cabinet. Nice work! Especially what you did with the leveling feet. My workbench was too low, so I made new “feet” to go under the legs at each end. These feet protrude about 2.5-3 inches, front and rear. Drilled a hole down through each foot, so I could adjust the slotted leveling feet from above. I have also used “heavy duty leveling feet” that take an Allen wrench at the top of the stem. Similar to a cap screw. Later, I discovered “leveling mounts”, generally used for industrial equipment, and found one that would take a standard hex head bolt. Place table saw on wood 2x4 base, with Tnuts installed on underside. Slide the leveling mount beneath the table saw and install the bolt from the top. Much more durable than any commercial leveling foot, and easy to adjust from above. Best wishes!

@joedance14 Ай бұрын

Very nice build, interesting approach! So many things can be done with a “four bar planar linkage”. The architect’s lamp on my computer table, and the floor lamp by my chair are just examples. And links of unequal length can produce all kinds of motion. I’ve also seen people build workbenches with integrated jobsite saw or planer that pull out and lift into position using this same kind of linkage. Also saw the video of your camera stand. Got me to wondering if this could be used for a mobile base (table saw, assembly table, etc) with retractable casters. Stay safe!

@joedance14 Ай бұрын

Really nice build! In particular, I like a number of aspects: the integration of the dust separator, the use of HDPE blocks, the use of a lead screw & nut, the use of the pillow block bearings…Very nice! Questions: In the first video, a comment was made, something about the bearings not being perfect; could you clarify or expand on that please? Any suggestions or recommendations would be appreciated. Why use threaded rod and epoxy to secure the clamping blocks? Why not use Tnut and bolts? Or embedded nut and machine screw? Just wondering about the reasoning. One of the issues identified in the first video was the distance between the center of mass and the lead screw, but that still appears to be an issue. Would it make sense to add some weight on the opposite side of the lead screw, to balance things out? Or would that overload the motor? Or is that just not an issue in this design? I would love to see a follow-up. Thank-you so much for sharing this project! (PS: also noticed your table saw storage cabinet and bank of drawers videos - two projects I really need to build!)😊

@redslover5293 Ай бұрын

Great video! Really like the detail & your commentary as well. This is what I've been looking for for a while now. Do you sell the STL files?

@akardasis Ай бұрын

I don’t. You’re looking for the 3d printing files? I can give them to you if I can find them

@logicalblueberry Ай бұрын

Great video. How much space did you allow above the small spice jars? I'm making one of these shelves and trying to figure out the best spacing of the shelves. Thank you.

@eatdrinkwineguy 2 ай бұрын

Great idea. Might do this with mine.

@frosted1030 2 ай бұрын

Nice, however if you have a table saw and a bandsaw and all the rest, you would probably spend a bit on a good router lift. You have the space and money.

@binghamhumber 2 ай бұрын

what temperature are you using? I generally want to avoid that harsh blue tone some LEDs give you.

@JoshuaNorton-of4yz 3 ай бұрын

This series was awesome, thanks for sharing!

@Amendoin1964 3 ай бұрын

Very good. Congratulation.

@Vandebilt 3 ай бұрын

Nice build indeed. But I'm missing the Arduino code. Can I find it somewhere?

@akardasis 3 ай бұрын

github.com/kardasis/Motorized-Router-Lift-code

@tpsooner7816 3 ай бұрын

Really appreciate this series!

@wstibbs1 4 ай бұрын

Just what the doctor ordered. Thank you!

@boombloom282 4 ай бұрын

There is an easier way to do this...

@akardasis 4 ай бұрын

Do tell

@user-jc3qf6hl6x 4 ай бұрын

Do you have a list of the parts for the electrical part of your project? I have designed a lift and found a wiring diagram on youtube, but it didn't work and I burnt my control board up so I am going back to scratch on the motor lift part. Love what you did. Very Nice

@akardasis 4 ай бұрын

I’ve had a few requests for code and plans. I have it all but just need to get it together. I’ll let you know

@user-jc3qf6hl6x 4 ай бұрын

Would you be able to set automatic heights at 1/16, 1/4 etc for the router so all you had to do was push a button? I am new to Arduino's.@@akardasis

@jamesharris3192 4 ай бұрын

I've done this and what people don't know is...... the stink that's produced ....beautiful grinding though....

@akardasis 4 ай бұрын

these didn't stink! they were hard as all get up though. It took a while to get through

@jamesharris3192 4 ай бұрын

@@akardasis oh good. I'm glad. Amazing pattern inside though eh. Super.

@jamesharris3192 4 ай бұрын

Oh yes the shell is so tough eh. Surprising, nature at its toughest...

@mallorybates7118 4 ай бұрын

This was prettyyy cool.!

@fyanezc 4 ай бұрын

Great tips, food for thought thanks for sharing.

@akardasis 4 ай бұрын

Glad it was helpful!

@lightsonstorrs8267 4 ай бұрын

Is the code yours, is available to use.

@akardasis 4 ай бұрын

Happy to give you what I have. It’s not really battle tested but it does the job.

@mark2talk2u 4 ай бұрын

Nice build. Thanks for showing a potentially dangerous offcut.

@garyfreaney3274 5 ай бұрын

Excellent idea, thanks for sharing.

@moonolyth 5 ай бұрын

Oky doky purchase.😂😂

@ChillHopChimp 5 ай бұрын

How’s the setup treating you? Finally have money to actually build a large shop instead of my 8x10 shed. Trying to fill it with everything.

@akardasis 5 ай бұрын

it's actually great for the price. I don't do that much welding but when I do, it's all pretty much ready to go and it "just works"

@tomasdrbal5479 6 ай бұрын

Thanks for inpsiration and simple explanation! I found also this similar solution kzbin.info/www/bejne/m3Kbn3Wjd9WVg7M

@grndragon2443 6 ай бұрын

You having issues with your bulbs not lasting? I'm down to 2 good strips, 2 strips with some blinking LEDs and 12 dead after 2 years of use. Sadly beyond the warranty.

@akardasis 5 ай бұрын

No issues for me.

@guineverec123 6 ай бұрын

Love it!!

@Peter-976 7 ай бұрын

Actual build starts around 3:40 if you don't want to hear "why"

@ecaff9515 7 ай бұрын

Excellent tip...thank

@weissbornjr 7 ай бұрын

VERY nice. The simplicity of the lift design is awesome. And, I really love the motorization. Have you posted the code and such to github yet? If so, what is the repo name?

@akardasis 3 ай бұрын

github.com/kardasis/Motorized-Router-Lift-code

@agn855 7 ай бұрын

Would love to see a review of this from the @techingredients - channel! And yes, how pulling forces are adjusting once you're tuning a guitar

@dougtodd5793 8 ай бұрын

WOW, where can I guy purchase the completed motorization of your lift. I can build the lift, but have no clue when it comes to the electronics. Plus, I don't have a 3D printer. thanks, great work

@sam78882 8 ай бұрын

Can’t find a plate to fit my DEWALT router 4” diameter model DCW600B with its plunge base DMP612 any help I can get from you will be appreciated I’ve been all over and no one knows ! Thx

@CallmeSam00 9 ай бұрын

254th of an inch

@frankhouck4446 9 ай бұрын

Do you have ideas for a locking mechanism? Does the position move with vibration?

@akardasis 9 ай бұрын

I never really solved this. In the past I've used threaded rod and a T-nut and the friction was enough, but the lead screw on this was too loose.

@kenwhibley2493 9 ай бұрын

This is definitely one for the to do list!! Easy to scale to a Makita 700 series.

@antomarkic7190 9 ай бұрын

It's not repairing, but buying a new one and replacing it, dislike...

@desertdweller9548 4 ай бұрын

Agreed. Also no dial afterwards, no evidence it fixed anything. Replaced one POS chuck with another. Also installed it bass akwards. Put the arbor in the chuck then install the arbor next time. This is why nobody trusts KZbinrs.

@Spodokamono 9 ай бұрын

Very clever, i like this a lot. Super well made. I like the idea of automation as well. Looking forward to the next video. 👍👏👍👏

@DIYTipstricksandhacks 9 ай бұрын

Loving this, I want to build it myself without the motorised lift. My only concern is that the lead screws move so freely, the router will drop while using it. I need to figure a way of locking in the height.

@johnbauer3801 10 ай бұрын

how did you handle dust control?

@josephblack9870 11 ай бұрын

Can you make a router lift out of oak

@MsDurli Жыл бұрын

swiveling would be an option

@akardasis 11 ай бұрын

like a tilting feature? Super cool. I'm currently working on re-re-redesigning it (don't ask). Maybe I'll incorporate a tilt

@michaeljameson1046 Жыл бұрын

nice build

@akardasis Жыл бұрын

Thanks!

@peterschmidt9942 Жыл бұрын

Looks like you get a bit of snow there. Do you heat your workshop in any way? I literally hate going into mine unless its at least 10+ deg.

@akardasis Жыл бұрын

I use a propane torpedo heater, which I'm sure would get me in trouble with someone. I usually run in for 30 minutes or something before I go in and shut it off while I'm working. It's not perfect but it's ok. Some day I'll get real system in....

@peterschmidt9942 Жыл бұрын

@@akardasis I've thought of doing that too. I've got a fireplace in mine as well, but it takes a while to get the heat going...then it's too hot LOL

@howardhurley Жыл бұрын

Do you you use Osh Park? I saw the purple boards...I've wanted to do this for over a year. A couple additional things to think about, placing a zero sensor and adding a small switch to index by a 32nd, 16th, or 18th. Really good video. Congratulations!

@akardasis Жыл бұрын

I used JLCPCB. I actually left a connection point for a zero sensor but never hooked it up. The predefined step switches are a great idea.