It’s unloackable by removing diodes. 4, which open all frequencies for tx and rx
@crazycats10017 күн бұрын
Ok, if you are capable doing, please do so. I am not.
@chv632ci17 күн бұрын
@@crazycats100 well I didn’t know if I was, and I literally just tried. Took me 10 minutes. Well I still have to put it back together but still done. Many KZbin tutorials on how to do it
@crazycats10017 күн бұрын
Paying $400 more for US version is better than the risk of killing $1000 Japanese version by trying to mod (for me). I have bad eyesight. Not to mention you can't get warranty.
@khiladigamer533918 күн бұрын
Thank you brother for this video i followed your instructions and install it but now i also want windows 10 back for my use so you can tell me how i install windows 10 without deleting it
@crazycats10018 күн бұрын
I might do some research. But my suggestion is to buy a used PC. I never understand why people limit themselves to just own one new PC. I bought a lot of used PCs and except a few they were fine.
@crazycats10018 күн бұрын
There are a lot of videos explaining the procedure. Here is one: kzbin.info/www/bejne/fZOZXpSviNxsncU This one assumes you have Windows 10 installed and want to add Bliss OS.
@khiladigamer533918 күн бұрын
@@crazycats100 thank you very much sir
@magpack920 күн бұрын
Thank you for the full image!
@crazycats10017 күн бұрын
New update is available here.
@magpack916 күн бұрын
@@crazycats100 Awesome! Thank you so much for the update and letting me know.
@jindrichkucera672121 күн бұрын
Yes 📡
@sonarfreq21 күн бұрын
I'm curious... if you power the keystep with a power adaptor and not via the Micro USB port, will the Micro USB port then supply power and MIDI to the JT-4000 (to eliminate the need for the MIDI Host device then)?
@crazycats10021 күн бұрын
After I read you comment, I actually tried that but it did not work.
@sonarfreq21 күн бұрын
@@crazycats100 Ah ok, well thank you for trying anyway!
@magwhyte21 күн бұрын
Do you know if anyone has made a full SD image of this version?
@crazycats10021 күн бұрын
Yes, that will be me. Check the description later.
@magwhyte21 күн бұрын
@@crazycats100 Thank you, you are awesome 👍
@crazycats10021 күн бұрын
You may want to keep the older firmware. There may be bugs. There was a bug in a version released yesterday but the developer quickly fixed it and released it as the same version today.
@4x6fk23 күн бұрын
First, let me bless your work. I'm always fascinate from the knowledge,curiosity and talent, of amateur radio people, that promote our hobby. so if it will Fly' why not ...😄 Again, GOOD LUCK, and keep share. 73's +++
@4x6fk23 күн бұрын
This is great! Keep with it. I'm waiting for the final version... :)🙏👍
@crazycats10023 күн бұрын
What are you expecting from the final version? See X6100 fly? Sorry, I couldn't resist. Thank you. You won't know how encouraging.
@zigajanzekovic205623 күн бұрын
works with the bluetooth app on the phone
@zigajanzekovic205623 күн бұрын
hello Thank you for showing us the work of DremNik, it is true that the program is experimental and works with a few settings
@crazycats10023 күн бұрын
Are you running the firmware? That makes you 5th known user in the world.
@zigajanzekovic205623 күн бұрын
testing and looking for screen settings.
@emilfranciscamazuelaАй бұрын
I get a Relocation failed: unsupported, failed to load image: unsupported, start_image() retuned unsupported errors when trying to boot to the USB installer. is there a fix to this?
@crazycats100Ай бұрын
Try using different version of OS. I did trial and error multiple times to get to work with my PC. Use good quality USB flash drive. Reformat USB flash and recreate the installer and try again.
@paulherson4948Ай бұрын
Don't think I'll be updating......
@crazycats100Ай бұрын
OK, it's your choice. I like the latest sBitx 64 bit Field Day Patch 1.
@superiortechnology6769Ай бұрын
Thank ❤
@Raku777Ай бұрын
Thanks for sharing this. I am inspired to do this with my JT-4000 and a MIDI out from one of my keyboard synths.
@richonguzmanАй бұрын
nice! 73 CA2RXU
@naitey7Ай бұрын
you save my life ty💗🧎
@Raku777Ай бұрын
Thanks for sharing. It did help.
@ginociancio1Ай бұрын
I like what you mean are doing it but I get confused I can't hear you so and is very important to me can you please up the volume a little bit but and I can send you and show with the vidio where you are putting the wires in the keystep I will appreciate it thanks 👍apaa
@crazycats100Ай бұрын
MIDI OUT of Keystep goes to MIDI IN of UMH-21. USB Host of UMH-21 goes to USB of JT. Sorry about the sound. I didn't think anyone watch it. I need fund to buy a good mic. Anything costs money I am doing it for free. No money is coming from KZbin.
@nehanichikahuakАй бұрын
Hi, do you have a good link to buy the wolf please....?
@crazycats100Ай бұрын
No. You need to take $1,000 risk. Make sure the vendor accepts free returns.
@LiveWire_GuyАй бұрын
Amazon has been showing the 6100 for $517 which is not that much more than the G90. This seams like a good deal as Amazon's price the premium for the 6200 is up to $282. You could almost buy the 6100 and an MCHF radio together for the price of the 6200. Or, move to the Yaesu FT710 without the speaker for $880 from R&L which is only $80 more than the Xiegu. I had an order in for the 6200 which I cancelled. It's a sexy radio asking for Japanese pricing but with cheap makeup. The 6100 seams like a very well priced radio for $517. If you want portable, how can you go wrong at that price?
@crazycats100Ай бұрын
I am not encouraging people to purchase X6100. If that's not obvious, that's my failure. As an owner, I've had so much headache with this radio. I am suggesting to do thorough research of the product you are about to buy. Xiegu quality control is hit or miss. Sexiness does not help actual QSOs either.
@LiveWire_GuyАй бұрын
@@crazycats100 amazon now has the 6100 for $490. It’s hard to ignore at that price.
@LiveWire_GuyАй бұрын
Actually, I just saw it for $465. That’s a steal.
@crazycats100Ай бұрын
I wasn't seeing that price. OK, that's business price. My company won't allow me to buy it. Anyway, I won't call buying X6100 a bargain at any price. Brand new IC-705 for $1,000? That's bargain or steal if it's in fully-working condition. This is an owner of both radios speaking. X6100 - a lot of trouble, IC-705 - trouble free.
@LiveWire_GuyАй бұрын
@@crazycats100 Yeah but the best price on the 705 that I've seen is $1340 from DX Eng. That means you buy the 6100 at $450 and the FT-710Field for $880 totaling $1330, which is still $10 cheaper than the 705. Granted you don't get qrp 2m/440 in that configuration, but you do have everything else and a 100W base station that is pretty small that you don't have to put at risk with outdoor POTA operations. To each his own. The 705 is an awesome radio. But, given all the SDRs at about $350 running Thetis or the large selection of open source hijacked-by-China running at $400 such as the MegaCheapHF (MCHF) M0NKA derivatives or even the ultra cool Russian TX-500, it's hard to justify the Icom at current pricing. Now if they dropped the 705 pricing to compete with the FT-710... then game on.
@qiyukeiove15882 ай бұрын
Where I can find the avaliable motion dive .tokyo software?
@crazycats1002 ай бұрын
You can't. It's very old software and the publisher never had downloadable software for existing users. You may not know but the software only works with the hardware connected.
@anamorphica68632 ай бұрын
Thank you, your a life saver :) . i was getting slightly irritated... I have had a keystep37 for nearly 2 weeks and a roland s-1 abit longer. Not been able to make a sound together. i bought 2 different midi cables, i already had one type. none of my cables worked. Found a usb c cable, took me a few goes to figure out i had to set the midi through as well but after that music nirvana. I will probably take a hacksaw and a multimeter and a soldering to one of the cables once I'm less agitated as sometimes i won't need the computer i hope. thanks again.😀
@HopeInChristYT2 ай бұрын
Make a video on how to use with pc
@crazycats1002 ай бұрын
There is nothing to it. You use an app such as Midi Tools or MIDI-Ox to virtually connect Keystep to JT.
@HopeInChristYT2 ай бұрын
@@crazycats100 i tried that but it didnt wanna show up hMM might be my keyboard
@crazycats1002 ай бұрын
Make sure to install correct keyboard device driver for your OS.
@herbertaguiar59682 ай бұрын
🤖 🤖. 🤖 🤖 🤖. 🎎👘🈴🎎
@yungerallenelectricalcontr64152 ай бұрын
I can't seem to remove the older version. How did you do so?
@crazycats1002 ай бұрын
sudo apt remove wsjtx
@Matt-qq8dh2 ай бұрын
Thank you for the video. I see that no ACC cable is needed. That's great. Will this work on the Xiegu G90? Thanks again for the video.
@crazycats1002 ай бұрын
Likely, but since I do not own G90, I am not able to confirm whether it works.
@Matt-qq8dh2 ай бұрын
@@crazycats100 Thank you for your quick reply. I'll give it a try if I decide to do this. Got it that you own the Xiegu X6100 not the G90. Thanks again.
@mohamedboubekri57942 ай бұрын
Anyway, thanks a lot, i have also GPT and so much problems, MBR just install flash, here you go :p
@mohamedboubekri57942 ай бұрын
Wtf, why you have formated the basic disk, he are holding the windows os no ? 😂😂
@crazycats1002 ай бұрын
Because I hate Windows. No, that disk was given by somebody else and I didn't bother format it before recording the video. Besides, I have too many Windows PCs.
@32herz2 ай бұрын
it works just fine! Just make sure you don't use FW800 card with 800-400 cable, FW800 never worked in windows and is running on ancient broken driver. You should fetch FW card with via vt63xx series chip, it runs on VIA's own drivers raether than the Win XP-era microsoft FireWire driver. ✌
@qbqbqdbq3 ай бұрын
The midi support on this unit is really bad. Doesn't transmit any breath or velocity information.
@crazycats1003 ай бұрын
That sucks. Even the Casio DH-100 had velocity and aftertouch.
@adamg1zhd3 ай бұрын
I'm getting Command 'make' not found but can be installed withl apt install make
@crazycats1003 ай бұрын
run "sudo apt install make" to install make. I reviewed my write-up and it's there. That means you didn't follow the instruction exactly. If you miss any command, it won't work.
@ETERERADIOASCOLTO24 ай бұрын
ci fosse un pirlone che l'antenna stilo la tiri fuori prendendola dal basso...tirano dall'alto e la richiudono spingendo dall'alto....' Ahhh...sob...sigh...mi si è spezzato lo stilo...sigh'...
@marianoplopeseanu8396Ай бұрын
😂😂😂
@GregTI3GB4 ай бұрын
why not implement MARS mod for those TX frequencies out of range?
@crazycats1004 ай бұрын
If you are capable, go ahead. The point is that those vendors do not disclose the frequency differences and take advantage of those who thought they got great bargain.
@propagating-radio5 ай бұрын
I really like my SBitx. Lots of fun to use!
@crazycats1005 ай бұрын
good to know. thanks
@Hank_W6IR5 ай бұрын
Bought mine last year at Hamvention. I'm still questioning whether I should have kept the 6100 and sold this. I'll be interested to see what you have to say.
@crazycats1004 ай бұрын
Just received sBitx. I would still keep X6100. They serve different purposes.
@luigiprovencher5 ай бұрын
Fot to put your camera on macro mode.
@luigiprovencher5 ай бұрын
That's how it came? Or did you unwrap anything that was in that box?
@crazycats1005 ай бұрын
It's a few days after the box came. The case had to be assembled before it's usable.
@luigiprovencher5 ай бұрын
@@crazycats100 Okay. Good.
@dah_ditdit_dahdah5 ай бұрын
is there an updated link? thanks- Tim
@crazycats1005 ай бұрын
yes, the link is updated, but the image is more than a year old. nobody is using X6100 armbian except to entertain friends
@dah_ditdit_dahdah5 ай бұрын
@@crazycats100 Downloading now thank you!
@crazycats1005 ай бұрын
I don't do CW but just got your name.
@kennethrussell56045 ай бұрын
Slightly confused here lol I’m not too good at computers and technical stuff. So you essentially put the r1cbuv20.0 file on the sd card, then copied the tgz file to the same sd card?
@crazycats1005 ай бұрын
Yes. You copy the tgz to a particular location, not just anywhere. When you turn on the radio, the patch is automatically applied, which makes it version 0.20.1.
@kennethrussell56045 ай бұрын
@@crazycats100thank you had a hard time keeping up with the video without you talking lol, I got it now🎉
5 ай бұрын
Thnx fer the vid. Did you manage to enter a 6 character locator? I just managed to put a 4 char locator.
@crazycats1005 ай бұрын
I put 6 but it shows only 4. It's for FT8 TX so 4 char is all you need.
@nicodemuspapadopoulos47085 ай бұрын
Thank you for the video and the introduction to MIDITools. I'd also like to use MIDIOx, but it does not play well with Windows 10. I am looking forward to using MIDITools. I am saddened that Roland has not included CC07 (MIDI Volume) in the S-1. CC07 has been in all of their synths for nearly 40 years.
@crazycats1005 ай бұрын
MIDIOx works fine on my Win10 PCs. I totally forgot about it when I was making this video and looked for a MIDI monitor app and found MIDITools.
@ys1rs5 ай бұрын
😮what the….! I use the same radio, I have and play the same headless Bass Guitar (at church and have owned it for 30 years), except mine says Hohner and is red color, use a Lenovo Laptop with card reader, love cats (have two), enjoy my X6100 and use Oleg’s firmware. In my case, have an Inovato Linux mini-computer and installing was very easy. Next time, if there is a new upgrade (doubt it), will know how to do it from Windows. Thanks for sharing! 73 YS1RS
@crazycats1005 ай бұрын
howdy brother!
@R1CBU5 ай бұрын
Thanks a lot! 73!
@Kinetic796 ай бұрын
I haven’t done this yet, but thanks for this. Do you have to have an active developer account? I had Xcode installed in the past for iOS app development, but I’m not longer doing that and it’s quite bloated in general, so I had uninstalled it.
@crazycats1006 ай бұрын
No. I did it without a developer account. You need an iCloud account.
@KE8ODY-WV-Ares-Ham-Dad-3O46 ай бұрын
Mine won't even transmit my voice lmao
@davepickering9976 ай бұрын
Well at least there's no annoying childish background music. Audio talk over(not robot) would have been nice though 😊
@user-dc9wn5sg1f6 ай бұрын
This was very helpful. Thank you!
@OmarAboy6 ай бұрын
thank you!!! 😁
@timmyers34286 ай бұрын
I have Ham Clock running but if I shut the computer down I have to go back to Command Prompt to restart everything, is there a way to write a task schedule to handle that on log in to windows?
@crazycats1006 ай бұрын
See these videos. Someone already asked and I responded. kzbin.info/www/bejne/pHSpequPeK2kY6M kzbin.info/www/bejne/Z6ecdYKNfMxqlZY
@1947wastheyear6 ай бұрын
Hello, did you get the CAT to connect and if yes how did you do it ?? thanks Jim +