Excellent problem solving guide. After changing the capacitor, my tumble dryer runs smoothly again. Thank you! PS. Same buzzing sound from the motor

Came out nice!

Thanks for video. My machine was very similar, it took only 10 minutes. I took out about half liter water, and then i blow dried about 5 minutes because disk was wet and there was lots of open cables. Now works great

Great stuff, thanks!

Worked brilliantly, thank you!

Posting on a dishwashing video would be the last I thought I would do... But your video is a life saver! Worked like a charm thanks for much 🙏

Where can i get a replacement of the back slat support. Ive tried getting them off other benches but they're either broken or missing.

Bear in mind that E15 is water detected in the base, where ever it has come from, e. g. dirty seal (as here), leaking sump or drainage pipe , leaking water inlet valve .

Thanks. I've fixed mine now thanks to this! Saved me a lot of money. Thank you.

Great video. Just got the e15 code after cleaning thecmachine. Think something left between the door seal. Will have a look at it tomorrow

Thank you. you are the only one who said to spin the drum. Bingo that was the problem.

Hi I also got E15 on Bosch silence plus, I got some water leak out while changing outlet pipe that was damaged by rodents, I think I got some water in there from that pipe, now everything is cleaned but code e15 persists, am thinking it could be some water splashed on other wires, or could it be some damaged wiring? Now left machine to dry at heating radiator, will see tomorrow if code persists when its dry.

All going well and entirely to sequence until I got to removing the pressure sensor. Firm pull just won’t come off. Of course you couldn’t show the actual removal as your hand covered it. Do you squeeze it, lift it from the back or front,left side, right side, straight up. It looks so flimsy don’t want to break any retaining clips. Help!

Many thanks, mate. It worked like a charm :) You saved the day! Greetings from Poland

it came out nice but i hated that purple. The original colour was much better for the legs

My dryer just kicked it, same problem with it just not spinning. Now I know what to do! Great video explaining things so articulately and safely ☆☆☆☆☆

I have the exact same dryer as you, with the exact same problem. Finding this video just when I was about to buy a new dryer seems like a sign of good things to come! I’m going to order the part now and have a go at fixing it. Thank you so much. Your video was very clear and easy to understand.

Thanks a ton man. This fixed the issue

This is why I love KZbin! My wife tells me that our 10 yr old Bosch Classixx washing machine is broken and is about to order a new one - I type in the error code and up pops this brilliant and extremely clear video. I remove the brushes and as predicted they are less than 1cm long - well worn. I order new set on Amazon at 5.99, refit and clear the error code. First wash is running next morning! Many thanks

Amazing video, thank you so much!

Thanks for this. With your instructions, I've managed to get our dishwasher back up and running 🎉🎉

Brilliant video, informtive and well shot. Just done my Bosch. It's a slimline so space is tight when trying to soak up the water but used the kitchen towel trick. The code has gone and just running a clean cycle. Thanks

Splendid video. You're a star. In my case I could hear the pump running even though the machine was not in use which I thought was weird but having understood the anti-flood feature it made sense. I couldn't see any obvious leaks so I hope the cause was in fact the minimal amount of gunk around the door seals. The only scary bit was removing the sensor as it's clipped in firmly but this is important to soak up the tiny amount of water which can cause the sensor switch to be activated.

My built-in Neff dishwasher broke down on New Year’s Eve and this video saved us an expensive call out/replacement. Thank you 😊

Worked great. Thanks!

Thanks! You saved as a repair bill.

Managed to eliminate E15 code on our NEFF dishwasher thanks to this video. It took a lot longer because our dishwasher is integrated with other kitchen units so I couldn't pull the unit out unless I broke of the skirting in front. Perhaps because of the skirting there was no white plastic cover to remove and I could remove the metal cover in front of the sensor and polystyrene disc without disturbing the skirting. After removing the water and putting back the sensor, insulation and metal cover I had trouble getting the door cover back on. I had to remove a wooden fascia from the door cover and then prop the top of the door open with a short section of wood in order to fit back the metal door cover and then re-attach the wooden fascia. After it was all put back, plugged in and functioning, my wife noticed a small piece of white plastic with a thin blue band on it that looked familiar to something I saw in the dishwasher innards earlier. I am unable to paste a photo of it here and hope it doesn't cause a problem later.

Just found this video after a quick search. The only thing I did different is I didn't take out the sensor I found that having it tipped back was enough that I could mop the back of the unit and so far so good. I currently have it on a quick wash to see .... fingers crossed 🤞

I used your tutorial to fix my mums Bosch with the error code E15- worked like a charm and is now happily running again! She’s delighted and I’m delighted I was able to help. Excellent clear instructions 👍👍

Thank you thank you thank you!!! Similar to other comments this video was so incredibly helpful and you showing how to remove the base plate was a life saver compared to other videos that completely skipped over how to remove it or just said "unclip it".

Thank you very much! 🙏🏻 in our home we have Siemens and it wrote E22 and everything was EXACTLY like you described, i even found a disgusting piece of fibery/stringy thing that i had to tear apart like in your video. Now everything works again. THANKS!!!

Thanks, your instructions helped me fix my Bosch Clasixx E:15 code, but I couldn't lift the clear switch block off the top of the disk no matter how hard I pulled, so I just had to use kitchen towel to soak up the water. Cleared the code anyway. Thanks again.

Thanks...all fixed

Thankyou - you saved Christmas. Well, Boxing Day, at least! This error came up at 2am on Boxing Day, along with the horrendous and scary sound of the pump which, if you dont know what it is, sounds like a machine about to explode! Since the cycle had finished, this video first of all gave me the confidence to go to bed, and in the morning, all tackled withon an hour. As someone else here said, the best tip was to really give that sensor a good pull - the tension is just plastic on plastic, not electrical connectors. My machine was a built-in Neff, and this definitely worked. Thanks again!

Thank you 🙏

Thank you. Helped me sort mine.

Perfectly explained and demonstrated! Took me 10 minutes start to finish; the error code is gone and the dishwasher is up and running again. Thank you!

Thank you so much for an excellent and informative video. Our dishwasher is working again!👏

🎉 man, you just saved my Christmas!

Brilliant, really clear. Worked a treat, problem solved on slightly different model Siemens built-in so a bit more fiddly to access the float. Thanks a million!

Thank you so much - Our dishwasher's E15 code was part of the 90% that could be fixed by cleaning the gunk around the gaskets and then soaking up the water beneath the styrofoam float. We've run 4 loads since the repair and no recurrence of the E15.

Thank you very much for such a helpful video. Done mine, just need some dirty dishes to test the fix. I'm making a curry this evening so hopefully all is now well!

Awesome, thanks

Thanks for a very good informative video. Our 6 year old Siemens iQ500 threw the E15 and the Siemens service engineer could find no fault other than the float having activated due to a small amount of water which he removed as in the video: this cost us £106 ! A week later and it threw the error again but I have fixed it following the instructions in your video. If it occurs again we will get a new dishwasher - tough not a Siemens, Bosch or Neff!

Copy what @postsilv71 said. Had this issue. Read F.21 as a drain issue. Check filter and drainage, all clear except for a 2p coin. Then I found your video specifically for a Bosch. Removed Motor, sure enough brushes were like in your video. Followed your link to Amazon, ordered Friday evening, arrived 8am Saturday morning. Fitted them as per video, put Motor back, followed the rest pattern, still had F.21 error. Done reset a few times then figured it was the other 10% causing F.21. Sunday decided to try and get door open to remove washing, couldn't find a way, then tried the reset again, voila error cleared. My machine is almost identical to the one you're working on, except my spin is not at 6 o'clock, more like 6.35, I have a rinse at 6 I think. Anyway, great work.

Brilliant video! Thanks so much, found plenty of old water in the base and resolved following your video and started working however now the dishwasher doesn’t dry the dishes, like the heater isn’t working??

I just fix mine ,same issue. U the best 😊

Amazing !! Thank you so much . I managed to fix my dishwasher having never done anything like this before . Brilliant instructions !!!

Fixed in 5 mins great advice from this guy who knows what he is doing 👍👍

It works ....😅thank u 🎉