I just went through this. What an absolute nightmare to get that setup.

The. Music is distracting, not necessary

A 4" inch dust collection port is a pro, not a con. I have a Ridgid table saw with 2 1/2" dust port, and I would much rather be like yours....the smaller port restricts air flow. If you are going to use a smaller hose with a vacuum, the larger port doesn't hurt you except for having to get an adapter.

Nice build, and a nicely done video! The impeller appeared to come right off, with no problems. Is that accurate? Some folks apparently find that the impeller is “stuck” on the shaft and have a terrible time getting it out. Or was there anything in particular to get it out?

Seriously dangerous and potentially lethal. Speakon connectors are not designed or suitable for mains voltage, despite being rated at 30amps. The plastic parts of the connectors are not designed for prolonged mains voltage and will overheat, melt, catch fire, very much more quickly than the powercon or true 1 equivalents. Moreover, you have used them the wrong way around. The chassis connector you have soldered to the cable has live terminals that can easily be accessed when no tool is coupled. You have demonstrated a potentially lethal option for shortening cables, and you should take this video down.

Where did you get the adapter that goes from the motor housing to the 4 inch hose to the filter mount?

ughhhhh show me how it works !!!

could have used French cleat to mount motor and filter. Is that a 2 course power motor?

The lifetime tool thing is legitimate. I have the 18v cordless wet/dry vac from the first batch and the handle broke off. After sending in some pictures in they sent me a whole new unit!

Please,.... DROP that music to something else when you are fastwarding, ....just sayin.👍

Thanks I am gonna try this

It says the owners manual to us a 4 in dust collection system. I converted to a 2.5 in hose and it worked. I eventually upgraded to a 4 in hose and it was a night a day difference.

*One of my favorite ♪woodworking tools **MyBest.Tools** Light and easy to maneuver. Noise😄😄 level is a lot better than others I have tried. No cord makes it easy to grab and use. The clear base plate makes it easy to see ahead of what you are cutting. The electric brake is awesome. Glad to have this in my tool collection.*

Ouch. What was that music? 😬

Too many really, really, really's...5 times by halfway through you mention it comes with a round base and a square base. Too repetitive. Gather your thoughts for a smooth delivery before making a viedo.

3:02 way to much wobble on the Veritas dogs (or holes idk), i have the Parf MII and works great to.

Changing the bit is a little challenging

Where do you get these

My height adjustment never worked properly out of the box.

did this have any issues?

How did you manage to get that impeller off? Mine seems pretty stuck on.

I did it myself with the Woodprix plans. I think this is the best way to find out how to build it.

Music is way to anoying

Woodglut scripts contain most of the woodworking plans you can find.

Music choice is extremely annoying.

I just received this trim router, never owned one and am excited to see what I can do with it. Loved the review and he was right, the word 'really' was used excessively. As I was watching I couldn't help but smile, started it over and I counted 59 times he used the word 'really'. I might have missed counted on the really, really, really comments. ;-) all kidding aside I enjoyed this review and using Ridgid tools.

hey man have you had any issues with the motor bearings by mounting the motor like this?

Works great!

Off topic, but: I have a Ridgid 2424-1 table saw. When you are adjusting the PALS, are you tightening the hex screws with an allen wrench, that are on the side or the 3/8 inch nuts that hold the trunnion? That part is confusing. Thanks

I wonder how many Jay Bates Miter Stations are out there in the world!

I’d just use the damn thing as an air blower lol.

You’ve built a very functional router table extension for your Ridged 4512 table saw. I just bought a 4520. I’ll remove the left stamped extension and fill that space with my new router table. I was planing to make mine with two pieces of 3/4 quarter MDF glued together and then cut to size. My router will set on a router plate that will be recessed in the table. Of course the table must be sealed with spar varnish to prevent moister from contacting the MDF. I live in Georgia and my shop is in a guarded detached from the house. It get very humid here…In the end i may go with the 3/4 plywood. My router is a Freud 3 hp…might be a 3 1/4 hp it is now residing in the extension of my Ryobi BT 300 which is about to be retired… i also followed Sean does DIY on you tube, you both have very functional “ how to” videos, thank you very much..

Great tutorial. Please get rid of that music, it ruins the vid. Great job on that router table.

How did you attach the main filter/bag assembly to the 2x4 bracket support? I don't see screws, but I can't imagine it would be sturdy just resting on the 2x4s.

Dimensions?

Hi there, when I turn it on, light comes on and nothing else! Do you know what the problem is?

What is that filter looking thing on the top side of the bag?

On the Woodprix website, you buy access to thousands of projects once.

Seriously that's awesome

Very nice, but you can now pick up a premade top for under £45 delivered.

Great build. Everything was perfect and then you ruined it by putting in a Cam Newton jersey. I'm gonna build this and upgrade it with a Russell Wilson jersey. Thanks for posting the video.

Really though there really is something about every tool that really stands out to be something really not likeable. But really Ridged is a top product line that makes really great tools and a really good life time replacement warrant that's why all my power tools are Ridged. Really.

Good video awful music.

What fence do you have on your saw?

A power tool review where you don't show it in use or even turn it on? I guess so.

You could put a 1/4" quick release bit holder in your drill.

I just got this router delivered today. I have a Bosch 1617 kit, but wanted a compact router. and something portable I could use when I place my other router in the table. I took advantage of a deal that came with a 'free' 1/4 sander. I was also pleased that it came with the edge guide (pretty robust, too) and an actual bit, BUT (and it's kind of a BIG BUTT), the bit does not fit in the collet. it will not go in. AT ALL. It gets stuck once it touches the collet. I thought something was wrong with the collet, but I went to go grab 3 other different brand 1/4" bits and they slid in smoothly (normally) and bottomed out . I will be e-mailing and/or calling RIDGID to see if they can replace it, but it was a bummer right off the bat because I was looking forward to testing that flush trim bit. I am looking forward to getting a lot of from it, hopefully they can hook me up. Otherwise I will have to find a way to sand/grind down the shank uniformly until it fits. (Note to self, get some calipers). Good video. Thanks! ✌

What The Song Called

Wha'ts the overall width of this from far left to far right rail?

Go look at Home Depot in abs piping section they have a 2x4 reducer that works. I did on. Y craftsman saw and works great easy to plug in and remove if needed elsewhere