2 ай бұрын
7 ай бұрын
7 ай бұрын
Пікірлер
@tonykeeton6526 16 сағат бұрын
Is there a template for locating the hole positions.
@MiniSplitSupplyHouse 4 сағат бұрын
For these there is not that’s why Dustin measures starting at 1:46 in the video
@SamuelGarcia-gt8ro 5 күн бұрын
Do you know how to switch the unit from Celsius to Fahrenheit. Ours was installed, and it automatically displayed the temperature in Celsius.
@MiniSplitSupplyHouse 4 сағат бұрын
Hello, some models will not switch If it will try the ⬆️ ⬇️ at the same time for 8 secs
@sarentopi1502 16 күн бұрын
This is an invalid training video. It doesn't show pressure test prior to vacuum. Sustaining vacuum does not guarantee a tiny leak is not present.
@MiniSplitSupplyHouse 14 күн бұрын
You’re right, we made a comment clarifying that this is not a true leak test, this is a good enough vacuum to clear the lines for us to guarantee your warranty when you shop direct with us 🙂
@riddecp.2224 17 күн бұрын
Is this unit powered inside through the header (wall plug)? Sorry, looking for an option where I have a full circuit breaker already.
@MiniSplitSupplyHouse 14 күн бұрын
Yes it is, no exterior power is needed. We have higher efficiency units available that require the disconnect at the outdoor only minisplitsupplyhouse.com/collections/ngtrade-mini-splits
@fredrenfro7710 19 күн бұрын
The entire system, head unit and compressor is powered by the inside 120 V wire?
@MiniSplitSupplyHouse 14 күн бұрын
Yes
@johnjackson224 21 күн бұрын
Does anyone have that brackets (inside one) dimensions or an install template?
@MiniSplitSupplyHouse 20 күн бұрын
These kits do not come with an indoor template that’s why we measure to get the accurate placement for the hole
@MiniSplitSupplyHouse 20 күн бұрын
I (Megan) will see about getting the dimensions for you
@jjmonty8090 23 күн бұрын
Good video…love the views of both sides. Easiest video to understand from all I’ve watched. From what I know you aren’t supposed to crank down really tight on the flare fitting because you will crack them. This is true for the vacuum pump too because there is a plastic o ring that gets hyper compressed and ruined if tightened too much. Also the coils need to be coiled horizontally as to not allow a build up of oil in the loops. Great vid
@MiniSplitSupplyHouse 14 күн бұрын
Glad it was helpful, the oil trap has been disproved by engineers, I don’t have the link available now but I will look for it. We coil the excess lines vertically with no issues.
@jjmonty8090 14 күн бұрын
@@MiniSplitSupplyHouse Awesome! Thanks for the update!
@anthonygarraud9812 28 күн бұрын
Good video
@sethshuman6027 Ай бұрын
Yes , it was helpful, thankyou
@MiniSplitSupplyHouse Ай бұрын
Hello, this video was made July 2022 we’ve learned a lot since then, pulling a vacuum like this is not a true leak test! We do require our customers follow this step to clear the indoor unit and lines of any air, moisture, potential contaminants that can affect the outdoor unit. You can always reach out if you have additional questions 480-338-6197 Dustin 573-410-2769 Megan MINI SPLIT SUPPLY ROLLA MISSOURI
@caru3257 Ай бұрын
I washed a mini split coil where the homeowner had run the equipment when a renovation had takennplace. What a nightmare.
@MiniSplitSupplyHouse Ай бұрын
We always discourage installing before the space is complete! The horrors we’ve seen from careless installs or people not understanding the equipment the way we’ve dedicated ourselves to is haunting 😥
@Bryan.Nguyen Ай бұрын
Do you know how many seers is this unit?
@MiniSplitSupplyHouse Ай бұрын
12/13 SEER All systems imported from Mexico that use indoor power only are low seer systems
@redneckpackrat Ай бұрын
Excellent video. Thanks. Only one question, for clarification.... did you start the unit BEFORE you released the refrigerant? Wouldn't that build up an awful amount of head pressure in it, or is this a more-sophisticated compressor than the old 1990s dinosaurs using R22 that I've monkeyed with in the past?
@MiniSplitSupplyHouse Ай бұрын
We do make sure they power up before we release the refrigerant into the system, you can call Dustin 480-338-6197 for a better explanation on why we do this 🙂
@redneckpackrat Ай бұрын
@@MiniSplitSupplyHouse I did just that earlier this evening, and Dustin did an excellent job of describing his process and reasoning for it. I'll be doing it that way when my adapter shows up and I can evacuate the lines and evaporator! Sure wish I'd come across this vid before making my purchase, it'd've definitely been made through y'all if at all possible!
@ChrisSpencer-mr1he Ай бұрын
Thinking about purchasing two of these and wondering what outside temp will it work down to in winter weather and still heat inside? Thanks
@MiniSplitSupplyHouse Ай бұрын
We’ve found they will still produce heat at negative temperatures, they lose their BTU output the colder it gets so we size for the heat load at cold temps not the AC
@jtheadturner Ай бұрын
Do you have any videos on the comfortotal 220v installation?
@MiniSplitSupplyHouse Ай бұрын
We do not the install process is the same for all Confortotal unless you have a F MODEL 24000 those are designed to have outdoor power 480-388-6197 Dustin for tech support
@caseymacgill3428 Ай бұрын
Do you have a unit that I can plug into the inside outlet that has a longer line set? I would like to do a second floor installation.
@MiniSplitSupplyHouse Ай бұрын
Hi Casey all Confortotal come with 12’ Lineset kits, when you need longer lines we recommend getting them from a supply house. The units are Precharged up to 25’ if you plan to go longer it is most likely you’ll need it charged for the added length for optimal performance.
@caseymacgill3428 Ай бұрын
@@MiniSplitSupplyHouse Can you recommend a place for me to order a 30 ft line?
@petrobull2560 Ай бұрын
Great video!👍
@MiniSplitSupplyHouse Ай бұрын
Thank you!
@SetitesTechAdventures Ай бұрын
So this unit gets power from a plug indoors instead of outdoors? Is that the case for the NG too?
@MiniSplitSupplyHouse Ай бұрын
The Confortotal is indoor only the NG is not like that, it is opposite power at the compressor only via disconnect
@fredturner1767 Ай бұрын
Great Video! I am considering installing one of these in an RV. I was trying to see on the video, is it possible to run the lines and drain tube out the side of the head unit instead of the back as long as the drain tube is at an downward angle? I would like to run the lines inside the coach and out through the floor to the compressor which would be mounted on a stand in front of the trailer. The lines would run under the trailer and thus not seen until they come up to the compressor.
@MiniSplitSupplyHouse Ай бұрын
Yes you can I’m trying to share a picture but it only wants to let me upload a video you’re welcome to text me and I can send you some photos 573-410-2769
@MiniSplitSupplyHouse Ай бұрын
These kits come with 12’ lines
@crescobar124 Ай бұрын
I have a question... I installed one in my house and I followed all the steps in the manual and the video as well and my compressor only turned on for a few minutes and the fan only turned on when I put it in fan mode. Do you know why is that happening
@MiniSplitSupplyHouse Ай бұрын
There could be many reasons What is the temperature set at, try turning it all the way down in AC mode and letting it run If it is at temp it will not think it needs to kick on
@shitzUnotz 2 ай бұрын
This 110V confortotal systems is designed to be wired to a quick disconnect outside by the compressor, right? I noticed you used a plug-in cord that looked like it was connected to the head unit. I don't want that I just need to make sure that is not how this system works before I buy it.
@MiniSplitSupplyHouse 2 ай бұрын
It is not designed to wire into a disconnect, it’s only power source is that gray extension from the air handler that’s why these are considered “DIY” We do offer the style of unit you’re asking about the brand is NG minisplitsupplyhouse.com 5 year warranty direct by us
@ernestwilson5591 2 ай бұрын
One thing I missed or it wasn't shown in your video your head unit had a power cord attached? Did you attach that, or did it come with that? Now I am confused, I just bought an Everwell mini split (very similar to the one in your video) and the electrical cover on the condenser has two holes in for power/signal cables, so I was assuming that I had to have an electrician to hook me up some outside power for the condenser unit. It is a 110v system, the handbook that came with it is worthless, that is why I have been watching so many you tube videos. Can someone help with this? Thanks.
@MiniSplitSupplyHouse 2 ай бұрын
Hi Ernest, I’m glad you found us. This unit comes with the power cord from the air handler that’s why people call them “DIY” Your Everwell most likely needs power at the compressor - Megan Mini Split Supply 573-410-2769
@ernestwilson5591 2 ай бұрын
@@MiniSplitSupplyHouse Hi Megan, thanks so much for help.
@MichaelMutai 2 ай бұрын
How much is your 9000btu Confortotal mini split
@MiniSplitSupplyHouse 2 ай бұрын
minisplitsupplyhouse.com/products/9000-btu-standard-model
@huntergcarswell 2 ай бұрын
This was amazing
@MiniSplitSupplyHouse 2 ай бұрын
🙏
@platinumf2505 2 ай бұрын
I have a confortotal that won’t cool was freezing and another one that blows cool but not cold. Been trying to get the contractor that installed them to come out for months. Would you say it’s probably Freon leak
@meganrunyon4498 2 ай бұрын
Yes that’s been our experience. 9 times out of 10 it is a Freon leak with the issues you’ve mentioned. what state are you located in?
@jessevasquez8323 2 ай бұрын
Awesome video. I talked to Maegan on phone and she walked me through on setting the remote control and converting the Celsius to Fahrenheit in a couple of easy steps she was very professional and I would advice anyone to call their supply house for any questions. Highly Recommendations. Thanks Maegan!
@MiniSplitSupplyHouse Ай бұрын
We’re always here to help 🙂
@rojeliom2389 3 ай бұрын
Where's the fuse located?
@davidhankins5708 3 ай бұрын
No fuse. IT is a 110 volt plug in unit. Inside handler plugs into wall outlet and provides power to outside compressor.
@MiniSplitSupplyHouse 2 ай бұрын
David is right! If your local codes require a disconnect you can feed the power cord out with the Lineset and wire it that way
@Blammoification 3 ай бұрын
thank you
@MiniSplitSupplyHouse 2 ай бұрын
You're welcome!
@prepsolar787 3 ай бұрын
awesome i just went and check your store going to order two from you soon
@MiniSplitSupplyHouse 2 ай бұрын
Awesome! Thanks for checking us out! We’ll see you soon, we offer Free Delivery when you’re ready and know what you need let us know and we’ll bring it to you!