Aa said before, never tap on the outer race. If you put the bearing in a toaster oven on broil @350° for 10 minutes it will usually push on by hand. You will need heat resistant gloves. Nice work by the way.
@KentForrest25 күн бұрын
Thanks for this. I have the same issue and will follow your fix.
@SivaFolsom25 күн бұрын
Good luck. Please update if you were able to repair the threads.
@KentForrest23 күн бұрын
@@SivaFolsomworked perfectly and took 10 minutes including the removing and replacing the wheel. Thanks man!
@SivaFolsom23 күн бұрын
@@KentForrest Awesome! Glad it worked out very well for you.
@adamrecktenwald802925 күн бұрын
Thx for this - really helped!
@SivaFolsom25 күн бұрын
Glad you found this useful.
@user-dr6ih7rm5w26 күн бұрын
❤
@Neopiece007Ай бұрын
Excellent Video & Very Detailed. Thank you so much for this video.
@SivaFolsomАй бұрын
I'm glad you found this useful.
@armcyn5Ай бұрын
And thanks for the video
@armcyn5Ай бұрын
Does the metal damage of the pool or rust in the pool
@SivaFolsomАй бұрын
It worked for few weeks and started to rust. Looking for a galvanized version.
What position does it fail in? Like say it blows the fuse in your 12 volt port. What happens does it just leave you with your car stuck in the air
@SivaFolsomАй бұрын
You can supply power using a 110v to 12v converter. It doesn't come down without power.
@1Samuel1524Ай бұрын
@@SivaFolsom that was a concern of mine. Because I've had a 12-volt Port blow its fuse with inopportune timing in the past. Just makes me wonder about those kind of things now.
@SivaFolsomАй бұрын
@@1Samuel1524 I agree. I always have a backup method available before using it.
@jameshuang1496Ай бұрын
Hey, thanks so much for this video. My base switch reads about 1000ohms in the closed position, whereas the other blue switch reads about zero. I don't have a beeping multi meter so I'm wondering if my readings mean my base blue switch is faulty. If so, do you have any recommendations on how to replace it?
@SivaFolsomАй бұрын
If you are getting that high resistance in closed position, it's very likely the switch is bad. Your resistance should be 0. You can buy the OEM microswitch from Honda or buy aftermarket version from Amazon and modify to fit. www.amazon.com/gp/product/B01ABIPV5Y/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
@jameshuang1496Ай бұрын
@@SivaFolsom Thanks, just ordered one from digikey. I also cleaned up all the linkages like you said, but have a quick question. I took off the electric motor to clean it and was wondering if that gear on the motor is supposed to spin freely? Because it would not budge and I did not want to force it too much. Curious if you know.
@SivaFolsomАй бұрын
@@jameshuang1496 The gear didn't spin freely on mine also. Supplied power to the motor terminals to test.
@adolg4049Ай бұрын
I have 2032
@SF-hc2fvАй бұрын
Nice video👍. I just ordered the damper retro kit for my ZTech from RetroZone based on your installation instruction. My setup is similar , but I have a two wire, but can to 3 wire. My syncron motors just went out on a 22 year old system. I didn't like the idea of replacing it with an OEM motor that was always drawing power. Seemed very wasteful and inefficient .
@SivaFolsomАй бұрын
Good luck with your install. It’s pretty straightforward.
@veyzeebbx4862 ай бұрын
I wish you weren't whispering. Otherwise, it would be a lot easier to understand what you're saying.
@SivaFolsom2 ай бұрын
Thanks for the feedback. I'll pay more attention and make sure the audio is good enough while editing.
@tf96232 ай бұрын
Thank you so much for posting this. I've ordered parts and should knock this out in a couple of days thanks to you. I have one question: what size (4/6/8 inches) bearing puller are you using? Thank you in advance.
@SivaFolsom2 ай бұрын
It's the 6 inch puller from Harborfreight. www.harborfreight.com/three-jaw-puller-set-3-piece-63953.html
@tf96232 ай бұрын
@@SivaFolsom Thank you sir. I'm equipped now.
@SivaFolsom2 ай бұрын
@@tf9623 Good luck.
@rodrigogloria67662 ай бұрын
How did you get the drive motor out? Should it spin by hand? I’m wondering if I have to change the drive motor bearings
@SivaFolsom2 ай бұрын
Yes, you should be able to spin it by hand.
@colinregan73802 ай бұрын
Dont you clean it out after tapping ?
@SivaFolsom2 ай бұрын
Yes, I did
@marcelomeirelesdasilva42432 ай бұрын
What is the key number used to loosen the nut that holds the oil cooler?
@SivaFolsom2 ай бұрын
27mm
@marcelomeirelesdasilva42432 ай бұрын
@@SivaFolsom Thank you for the information.
@SivaFolsom2 ай бұрын
@@marcelomeirelesdasilva4243 You are welcome
@GrujicicFamily2 ай бұрын
Thank you for recording this video, I just finished fixing my pump, you saved me $2000 for a new pump, really appreciate it!
@SivaFolsom2 ай бұрын
Glad you found my video useful!
@TDRMentol3 ай бұрын
🎉cheers good video
@bervotten3 ай бұрын
Which fuses you tapped into for powering the wolf box?
@SivaFolsom3 ай бұрын
I think it was fuse #8 (unused) and received power only when the key was in accessory position.
@AndryRobles3 ай бұрын
Which fuse do you recommend for powering even when key is not in car. For park monitor
@SivaFolsom3 ай бұрын
@@AndryRobles Use the fuse for Door Lock (I think it's Fuse #25)
@AndryRobles3 ай бұрын
@@SivaFolsom thank you
@SivaFolsom3 ай бұрын
@@AndryRobles Glad to be able to help
@felit99914 ай бұрын
There’s no sbc system on these brakes? Or is the car battery disconnected to work on them? I was thinking of doing this myself with a friend but I was scared off by the sbc. And ended up just paying for it
@SivaFolsom4 ай бұрын
C240 doesn't SBC brakes.
@scowell5 ай бұрын
I bought the switches from DigiKey in USA... but I did not need them! Like yours they were fine... but the mechanism had locked up from the old dead grease. WD40 freed the mechanism and 3in1 oil lubricated it. I removed the motor and was able to exercise the mechanism through all functions... the motor is there to pull the final door closure in. I put my window bracket opposite what you showed... but it seems to work OK, the windows don't go down all the way anyway. Finally, the door won't pop all the way open using the fob... it seems to hang... but with the handle it opens fine (the handle gives it that last tug to clear the latch) and it closes nicely.
@destro51245 ай бұрын
what I connected wrong, I have an SRS error
@SivaFolsom5 ай бұрын
SRS may come on if the battery is low or the passenger seat occupancy sensor is either lose or disconnected.
@davidsyked94205 ай бұрын
What is the price of the lift rack
@SivaFolsom5 ай бұрын
Got it from Costco for about $1599.9 + tax (including Truck Adapters).
@moerav5 ай бұрын
I’m having the same issue. I tested the impeller motor and wheel motor by taking it apart and when providing power, it did not move. Might just need to replace it by getting the brand new motor compartment.
@EddieRiff5 ай бұрын
What tool and how did you unclip the fuel lines? Did you depressurise the system and if so...how?
@SivaFolsom5 ай бұрын
I used a plier to disconnect the fuel line There are tools available on Amazon that work on most cars. Didn't depressurize the line.
@polloloci215 ай бұрын
Nice- it also helps to use a little bit of lubricant as you do this.
@SivaFolsom5 ай бұрын
Thanks!
@MatterLabz6 ай бұрын
Thank you for taking the time to document and share what you learned here. This was a big help on my installation.
@SivaFolsom6 ай бұрын
I'm glad my video helped you out!
@mixertrixer6 ай бұрын
is this a automatic transmission?
@SivaFolsom6 ай бұрын
No, manual transmission
@mixertrixer6 ай бұрын
okey thanks @@SivaFolsom
@SivaFolsom6 ай бұрын
You are welcome@@mixertrixer
@brittmorries36956 ай бұрын
Thanks Siva, for taking the time to record and post this. Super helpful!
@SivaFolsom6 ай бұрын
I'm glad you found this useful!
@CashewCashy6 ай бұрын
If you could please post a video explaining how to actually install the unit that would be awesome. Is it simply, once having the old one out, to unplug the old and plug in the new? If I heard correctly, the only reason you needed to set your own ground was for the radio correct? If I don’t plan to use the radio, just cds or Bluetooth or aux cord, do I still need to set a ground?
@SivaFolsom6 ай бұрын
I got the kit from Crutchfield and it comes with all the kit needed and instructions. It's very simple. Ground connection is needed for the unit to function.
@CashewCashy6 ай бұрын
I wish you showed how you took out the old one and how you installed the new one. Why edit out the most important part of the video?
@SivaFolsom6 ай бұрын
I was just starting out recording my installation and didn't record everything. Sorry.
@z.muslim6 ай бұрын
Is it okay doing this without flush the radiator? is it not a problem if some air enter in the system?
@SivaFolsom6 ай бұрын
My recommendation is to drain the coolant, replace and flush the system. You can do it without flushing the system, but make sure to properly bleed the system.
@user-wg1xn2pt2u7 ай бұрын
Thank you. This was perfect
@SivaFolsom7 ай бұрын
Glad you found it useful.
@thotpolice52447 ай бұрын
I also have a golf mk4 with the same pioneer radio but i cant a bracket for it anywhere.If you could send me a link of it it would be greatly appreciate 🙏
@SivaFolsom7 ай бұрын
Here you go. www.amazon.com/gp/product/B000FE7Q5I/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
@mthabisindlovu26307 ай бұрын
Hie everyone I need help i have a golf 4 The engine starts but dies when I Rev it
@SivaFolsom7 ай бұрын
Check for clogged fuel filter, air filter and MAF (Mass Air Flow) sensor.
@royalriders44097 ай бұрын
Skoda superb 2011model tap size please
@SivaFolsom5 ай бұрын
It's probably similar to what I used TAP 14x1.5mm)
@royalriders44097 ай бұрын
What is the size of tap bit please
@SivaFolsom5 ай бұрын
TAP size 14-1.5mm plug
@salihkoker15267 ай бұрын
My Honda says left power sliding door base position switch. Do you know the part number or numbers I need to get?
@ismaelhernandez73927 ай бұрын
What size separator is the one you used i think i got the wrong size
@SivaFolsomАй бұрын
Sorry for the delay. Here's the tool I used. www.amazon.com/YUAN-23pcs-Bearing-Removal-Installation/dp/B075N1FRDL/ref=sr_1_27?crid=D2618VGJMSU&dib=eyJ2IjoiMSJ9.bOQzmDscK583kV7soMbwnDcmfZGV8ULyqHhtKewFhlP2-Xj05vCzTK-YDMgaTErKe7OdyR7jXih2n75OT9CVPMMxhzCaB9xqI3z34gZalilUKZHSilaStWu7UpPgDPh9t_qaDN0AboZ_RkASH28JjoCwp13vbWVv28f8Y1a1RSkYVwCMh7MbunVkeWhTqWhcJvOsihCs35II8iR7IgPz_s6JlElRb2AEvL3A3Z-kVn8fiSksS_79c-YObjzRu13H8WFzzg1JnQvmxYuj5WXCT_QwmXpV3kE60QGmIXH2_LM.D8RrM53XPAPqrkbhttpwhNPtWtNzj4EliBKTxh8Gbmo&dib_tag=se&keywords=wheel+bearing+removal+tool&qid=1719186395&sprefix=wheel+bear%2Caps%2C184&sr=8-27
@sylusellis32988 ай бұрын
You didn’t show how much oil to put in
@SivaFolsom8 ай бұрын
It's about 5.7 quarts (5.4 liters)
@abdons.velazquez62008 ай бұрын
👍
@willtoulan8 ай бұрын
Great video thank you
@SivaFolsom8 ай бұрын
You are welcome.
@niteraven73338 ай бұрын
Ever had an issue trying to remove that bolt? I can't get her off and I'm using an impact wrench with long extension from driver side
@SivaFolsom8 ай бұрын
Yes, spray a liberal amount of PB Blaster penetraing oil or something similar and let it soak overnight. Then, it should come off. Good luck.
@user-tq6wm2un8t8 ай бұрын
The 2008-2010 model does not have this filter
@SivaFolsom8 ай бұрын
Heard it's inside the transmission bell housing. Thanks for pointing it out. Updated the title.