thanks for the tip :) it was really easy to remove a lego sticker from my lego box 👌🏻
@jstriker6232 жыл бұрын
Where do I buy guessoline? 😅 Great video... Thank you for posting. I'm calling it guessoline from now on 👍
@nathandenson74352 жыл бұрын
Tried it and it worked. Thanks a lot 😁
@rjzuldany41172 жыл бұрын
I don't have hair dryer
@Mooredacity2 жыл бұрын
Yesterday was a frustrating day. Saw your video this morning and read comments. 5 minutes with diesel did the trick. Your blood's worth bottling.
@audrybella64052 жыл бұрын
I thought about doing exactly this but was reluctant (afraid that I might damage something in the process...) to do so until I came across your video and all the associated positive comments on how well this procedure worked to clear your oiler. I do like the suggestion to use diesel instead of regular gas both from a safety standpoint and from a lubrication standpoint. Thanks for taking the time to share this solution with THE WORLD!!!!
@jhh2432 жыл бұрын
Great video, thank you for the knowledge!
@oriel2292 жыл бұрын
Used this procedure on a Echo 360 which had stopped oiling the blade, resulting in a jammed nose sprocket . I firstly sucked out the emptied oil tank using a wet and dry vacuum. Then I filled the oil tank with white spirit, as opposed to risking gasoline, and revved it until the spirit appeared. Emptied oil tank again and let it drain for an hour to evaporate any residue of spirit. Running the machine head without the chain the oil appears to be feeding through, so we shall see when I've lubed the sprocket. A jamming sprocket was the thing that started me off on this. I'll let you know if it works.
@TWJfdsa3 жыл бұрын
thanks, mine caught my x-wife on fire- no more child support payments! maybe I shouldn't have started it on her while she slept.....
@raymondcava46693 жыл бұрын
Your next video illuminate the music it’s very distracting for want to listen to musical turn on the radio.
@CombatFusionMartialArts3 жыл бұрын
Worked a treat, many thanks.
@walterbuller91713 жыл бұрын
I tried this. Guess what? After sloshing around some lacquer thinner inside the oil reservoir, I poured it out, then stuck an air gun inside the reservoir opening to dry out the thinner and hopefully blow out any remaining trash. A shiny piece of something blew out and settled to the floor. I picked it up. It was a large piece of one of those round foil covers that you have to push through when you open the cap on a new gallon pail of bar and chain oil. It must have fallen inside the reservoir during a fill-up. I went ahead and turned the oil dispensing screw on the bottom of this Echo CS-490 all the way to the left just to be sure the chain is getting properly lubed. Thanks so much.
@jesseguymon20833 жыл бұрын
Sounds like a fire hazard. Diesel would be safer
@ryanshaw86633 жыл бұрын
This worked like magic, thank you!!
@blazeboucher69313 жыл бұрын
Thanks so much I got to go buy a new chainsaw because mine literally melted the cover right off works great line was clogged up like crazy
@BurtBowers3 жыл бұрын
That's ah lot of loud tinker bell music you"re playing it drowned out you"re voice couple times.
@michaelbutler55783 жыл бұрын
This worked absolutely perfect for me,problem is fixed at last 👍
@clintainsworth48673 жыл бұрын
Vert helpful worked a treat
@1Branch63 жыл бұрын
A Hair dryer that plays reggae music while you dry your hair. A box that plays music when you remove labels Btw that's cool way to to do it.
@terryallen44073 жыл бұрын
Dude! I wish I could buy you a beer! I did this for my Husqvarna 450 Rancher and it worked like a charm! Appreciate the video, thanks a million!
@stalix19793 жыл бұрын
Worked a charm, thanks for the tip!
@wooshkabeeba1323 жыл бұрын
noticed this was a husqvarna 450, they have automatic oilers, I had to bore my pump out to 1/8" that helped more in addition to your procedure
@berwickbasketballlightning94914 жыл бұрын
cheers mate, worked first time!
@MrTimestops4 жыл бұрын
Worked great, was dreading taking the clutch assembly apart to get to the oil pump and line. Thanks!
@d.s77414 жыл бұрын
holy rollers... it worked! Thank you sir!
@AltonRowell-gb1lb4 жыл бұрын
It's a husqvarna 450 man. The only cure is to carry a 1 gallon bucket of oil and dipping your bar in it.
@coder0104 жыл бұрын
Thx, I did everything on my Remington and your soul ur ion solve my problem, thx!
@kenthompson65394 жыл бұрын
Petrol too dangerous I have tried kerosene but as yet not working!!!
@metaldetectingwithlugnut4 жыл бұрын
Great idea. I used a mixture of PB Blaster and SeaFoam instead of gas. It cut through the clogging gunk in a few seconds. Thanks.
@oldman10264 жыл бұрын
This is chain shaw repair video, but I cannöt anderstand why the Music Concert !
@_kimiadventures4 жыл бұрын
I’m ready to set my 🤬 house on fire to stop this 🤬 smoke alarm chirping. I’ve changed the battery I’ve dusted it, I’ve turned the mains on & off OMFG 🤬🤯
@7xh4 жыл бұрын
Ochre Clay chill chill
@maxdragon154 жыл бұрын
I tried this, then my chainsaw caught on fire and burnt the tree down. Saved me a ton of time! Thanks!
@bentonrodeheaver25964 жыл бұрын
I had tears from laughing about the tree dilemma. Guess I'm not the only one with buzzard luck!
@glennryzebol44723 жыл бұрын
That was funny as hell bro.
@g-asplendidsavage17002 жыл бұрын
KABOOM😂
@Sirskibumsalot4 жыл бұрын
Yea I just cleaned mine out by spraying carb cleaner into that oil port and its working great now ....but your idea sounds great too , might have to do that every once inahwile just to keep that oil line flowing ...I have a husky 445 .
@stephentheron33825 жыл бұрын
Awesome just did this and it worked your video really helped
@robeftyearian87605 жыл бұрын
I'm going to try tgat
@rodkoehler5 жыл бұрын
Gonna try this on my Husky 455 tomorrow--sounds so much smarter than the youtube video the guy from Texas did. But I'm really curious about your accent--where are you from?
@bigmac30065 жыл бұрын
The music needs to be way louder.
@eagleriver9005 жыл бұрын
New chainsaw owner.. found this, tried it, worked like a charm, took ten mins, thanks man!!
@charleshines61555 жыл бұрын
I have a 40 volt saw that is not oiling. That is why I am here. Are the oiling mechanisms the same on gas and battery powered ones?
@incubusfan42115 жыл бұрын
Thank you for this. I was about to throw mine away, and it's been a damned work horse. I tried air, shop vac, pressure washer...nothing. This works.
@KerryVialpandomwb5 жыл бұрын
wish me luck.. just came home with new oil pump and she still doing the same thing.. no oil.. its clean hole is clean..bar is clean.. so what the heck.. watched lots of video.. and i think i am going to put a little gas and marvel mystery oil in it.. and hope i don't catch anything on fire.. fire chief is my neighbor.lol.....but.. have a question maybe some one might help here with.. suppose i need a gear or something else replaced.. when i got a new oil pump.and what about spraying with some carb cleaner in oil tank and not running it.. too flammable?.
@EnduroJSSwe5 жыл бұрын
thanks. going to do this to my old 55. but im going to use diesel instead of gasoline! :)
@my2centz1965 жыл бұрын
Awesome thanks! I've rinsed my oil tank out with gas but never ran it. My saw started burning the bar the last time I used it and I found out it wasn't pumping oil so I cleaned it out and still nothing cleaned it out again and used motor oil and it came out but not as fast as thin oil should but I was afraid to run it with gas in the tank not sure if it would eat the plastic components of the oil pump
@craigweis16755 жыл бұрын
Clean with gasoline? Well O.K. 'Like solvents dissolve like dirt.' Makes sense to me. Could use Marvelous Mystery Oil [MMO], WD-40, diesel fuel oil, or gas.
@kevinryan36675 жыл бұрын
my old 50 did not have an adjustment screw- this procedure worked PERFECT. GREAT VIDEO.
@Tree-feller5 жыл бұрын
Wow... that is a nice sounding chainsaw :) I imagine that once you get the bar and the chain on there you'll have the whole orchestra going LOL Thanks for posting the video!