Am5 is crap. DO NOT UPGRADE.

1.063v on the GPU is unnecessary. I know stock it will use that when boosting but you could run much cooler, quieter, and use less power if you tuned youre voltage. (Ctrl+F in MSI Afterburner) Most Nvidia cards I have had can usually be reduced to around 0.950v give or take at the same max boost frequency and this drastically reduces temps and power draw with zero drop in performance. A lot of times I can even undervolt and overclock at the same time by reducing the max voltage by roughly 0.100v and increasing the max frequency an extra 100 MHz.

Hello buddy.. i had to return my is-55 cause it wouldnt work with the b650i gigabyte aorus I ordered this one cause it says to be compatible.. how is the cooling?

Mad lad. The nh-p1 is bigger than sg13. I am considering corsair 2000d with the nh-p1

User friendly you say it's the worst app from msi

does it run all aaa games?

Hi, do you think this is better than wraith stealth stock cooler for ryzen 5 5600?

I've got the 4060ti Palit single fan in, the 4060 uses less power than the 1660, but the ti uses about 160w. which is epic, and a 57003xd only sub 65w CPU.

A nice cpu the same cpu i use but i regret not buying i5 12400f a bit cheaper msrp and a decent spec diff

It still doesn’t work for me 🫠

Is this cooler worth getting?

put that camera in manual focus mode, set it to infinite and as log as you don't go very near the lens (less than 1 meter) everything should be in focus !

What power adapter do you use?

You've identified what the result of the problem is, and figured out the workaround. But the cause of the problem still remains.

more shorts

Pull the cooler and do a repaste. See if that fixes the thermal problem. Those EVGA 1080Ti FTW3s do NOT run hot unless heavily overclocked. I could regularly push mine to over 2000Mhz without breaking a sweat before I did the hybrid kit to it, and then that same card did something like 2200-2250Mhz off the top of my head. That was like... 4 years ago though, so fuzzy memory is definitely a thing.

hey mate, ive seen some of your builds on facebook in the area, on marketplace, someone named andy lu is selling evga 1080tis for 240

If you have not already, disassemble the card and slap new thermal paste on, also spread it out in a thin, even, but fully covered coat with a old gift card or something. My buddy ended up in a similar situation as you, 3 years ago he bought a used EVGA 1080ti for $500 or so. The card would crash his PC in games or completely shut it off. I could replicate it on multiple PCs with it too. I tried everything on the software side including bios flashing. The fix for it ended up being a thermal issue, it likely had a bad hotspot that was not being reported in software. The factory paste application did not look too great either. Its totally worth a shot if you can't return it. As a last resort maybe even try reflowing the card in an old oven? The success rate is not very high and will vary but its worth a try too.

When you DO get into Windows, is the thing even recognized at all in something like Device Manager or something? I know you said that you flashed the VBIOS, but if I remember correctly that card has multiple VBIOS on it that can be changed by flipping a switch on the PCB. I've seen some of these cards that were used extensively for mining that had custom mining VBIOS loaded onto them and you need to get rid of that. I had an EVGA 1080Ti SC2 that I had to do that on and it FINALLY ended up working, but I had to make sure that the VBIOS that I loaded onto it was the correct on for that switch position. Don't know why it mattered on that card since I was told by several people that it shouldn't have mattered, but in that instance it did.

try a popos bootable usb w/ invidia drivers.

Why did EVGA stopped making GPU?

No PSU in tho, that takes up a lot of space

Cs2 uses more GPU usage than Csgo ever did, so no need to stress about high gpu temps, I run average at 60-70 degrees regardless of the video cards I have lying around. The 4790 still runs incredibly well a decade later.

Hi, I have the same motherboard. It seems that undervolting is not working due to the AI CEP. You may switch to 0x104 microcode for the undervolting. Hope it helps you.

yea ps1 controllers work perfectly on ps2's and i believe the ps1 memory cards work on ps2's as well

Who the hell play cs on high settings :( More fps matters more then graphics

How much do you sell them 4

Can you put some fan duct? Make low noise and lower temperature please 🙏

Are you using a voice over?

Thank you very much for the tutorial

This video sound mixing is COOKED

Just paid 175 us dollars.

I can’t even hear you my dude. Drop the audio to 1:4 of your voice and it will help you.

Oh no🙈

Tone down your MUSIC

My guy I can't with this video.. The music too loud and too distracting..

Glad i brought a amd laptop. I wanted to get 13gen😂😂😂

Can you turn the music up? I need to hear it even more!

Does this increase temps? My 13700 k has been running hotter recently

Music is louder than you, whole video is too loud tbh. How do you miss this?

Glad I bought 12 gen because 13 were not available in shop 😂😂

Glad I bought 12 gen because 13 were not available in shop 😂😂

is this voltage and oxidation issue only occur on 13 th and 14th gen desktop processor, or it happens on the mobile one as well?

u should do more shorts content because its easier to get bigger

preciate that

what's that wifi antenna?

Cool Video man! Keep it up!

I want to build in this case with the 3050 LP but your video where you drill out the rivets scares me a bit.

I think i'll be going for the same build soon. I just had to replace my motherboard and bought the gigabyte A520i. Current build is with ryzen 5 3600 and 1660 super. Will upgrade to 3060 as well and 5600 if possible. Might do metalfish case or something similar.