Жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
3 жыл бұрын
Пікірлер
@Foxkitos2020 6 күн бұрын
Hey mate, thanks for the video. Any idea why if I stream with stream labs with my quest 3 stutters? I’m missing a settings?
@KarmasGhosts 3 күн бұрын
May I ask you PC specifications? Because VR alone takes alot of processing power. Some streamers will have one very high end PC or some have a secondary PC to stream the footage. I've tried both and opted to use a High End PC. Best way to see if you're PC CPU bottle neck is monitor when you're in VR and streaming. If it's close 100% all the time then lower your settings as low as you can. If it's still high then you might need upgrade your PC. RAM, CPU, etc. Thank you for stopping by.
@Foxkitos2020 3 күн бұрын
@@KarmasGhosts hello, thanks for your help. I’ll check that but I have a decent rig. I7 14700 64gb ram Rtx 4090
@BennyThompson-s5s 8 күн бұрын
I have recently purchased the Trex -700 Nitro pro helicopter can you suggest me which engine suits best YS91 SR or OSmax 105HZ
@KarmasGhosts 6 күн бұрын
I can't speak on OS engines. I haven't flown them. YS91 SR -3DS engine is very reliable. Never had a hard time to start. I never did 3D flying with my 700. So I didn't see the lack of power. YS have 120s that mount on to 91 pattern. You should look into the 120s. Is there a reason you're looking into the older YS91 SR engines?
@KarmasGhosts 6 күн бұрын
Thank you for stopping by!
@Madness-709 22 күн бұрын
Did you get most of that stuff on winwing?
@KarmasGhosts 20 күн бұрын
Combination of Winwing, Virpil, Thrustmaster, and TekCreations. Thank you for stopping by! Here's a link for the full video with list of components in the description.
@KarmasGhosts 20 күн бұрын
kzbin.info/www/bejne/bZLMnaerr5Kbg6ssi=2KOCrmEqDC8scbQs
@AquaBourne Ай бұрын
This is why I keep losing dogfights… 😂
@KarmasGhosts Ай бұрын
😆 Thanks for the laugh and thanks for watching!
@mtfunit12 Ай бұрын
what are the specs i want to get one my self😅
@KarmasGhosts Ай бұрын
Thanks for watching! Here's a link to the full video and thr companies and components are listed in the description. kzbin.info/www/bejne/gn29gnmqidimd9Usi=STe5ElHwVYykqjVC
@KarmasGhosts Ай бұрын
The components are also listed in the description of this short.
@NoSteponSnek69 2 ай бұрын
Well Done, tip of the cap!!
@KarmasGhosts 2 ай бұрын
Thanks, why did you change your name, J? To troll ED and Razbam. Hahah
@davidhobbs8343 2 ай бұрын
Way cool 😊
@KarmasGhosts 2 ай бұрын
It was pretty awesome to catch them here in the States. Thanks for watching.
@wilhelmw9149 2 ай бұрын
Bro built a whole cock pit i thought i knew what it meant to be an f14 main but like jon snow i knew nothing
@inkwolfartandbuildingstudi3223 2 ай бұрын
Nice MH-60R rescue, love everything rotary
@KarmasGhosts 2 ай бұрын
Yeah, I wish Eagle Dynamics would make this for real. Thanks for stopping by!
@inkwolfartandbuildingstudi3223 2 ай бұрын
@@KarmasGhosts no problem
@nidahk2316 2 ай бұрын
Just buy a plane at that point 😂
@KarmasGhosts 2 ай бұрын
I wish! 😆 Thanks for watching!
@Pug-76 2 ай бұрын
so are you finding the right buttons with muscle memory alone? I tried to align the in game untraleap hands but its just not working for me.. either the left hand is off, or the right one is.. on top of that if the game detects your hands, you cant use the mouse to click on the other stuff in the cockpit.
@KarmasGhosts 2 ай бұрын
No, I'm not finding the buttons/switches with muscle memory alone. I try to acquire the hardware to match the specific cockpit that I'm flying. Then, I align the panels/controls with the VR image by adjusting the mounts. So when I reach out for a switch/button that I see VR, I will feel it in real life. Thanks for watching!
@robertd57i989 4 ай бұрын
Thats really awesome. I with they would just do the left and right quarter panels so you dont have the hook and the landing gear all in one panel. Kinda takes away from the realism
@KarmasGhosts 4 ай бұрын
Yeah, I wish they did also. That's why I don't use the hook lever on the left side and installed a separate lever on the right for the hook. That way, work flow is good to go for carrier landings. It keeps the immersion. Thanks for watching!
@robertd57i989 4 ай бұрын
@@KarmasGhosts any time man. Yeah i sent an email to them inquiring about them making Left and Right Vertical panels. We will see what happens.
@HRNTTWK 4 ай бұрын
What USB hub are you using to plug all of that in? Purchased one recently and it didn't work out well for me. Currently only running Warthog setup, rudder pedals, cougar MFDs, and VR headset. As well as keyboard and mouse.
@KarmasGhosts 4 ай бұрын
I use a combination of a powered J5 create 7-Port USB 3.0 Hub and (2) Sabrent 4-Port USB 3.0 Hub. Thanks for stopping by!
@OKCSPEED 5 ай бұрын
People take dcs too far
@KarmasGhosts 5 ай бұрын
I take all my hobbies to this extreme.
@Error_404_Account_Deleted 5 ай бұрын
Only thing he needs now is taste in music
@KarmasGhosts 5 ай бұрын
Lol...I know I know. The music I originally posted wasn't available on KZbin. I just picked a the semi popular from the time.
@showtimemahomesttv6320 5 ай бұрын
Great song choice, great airframe.
@KarmasGhosts 5 ай бұрын
Thank you and yes it is! Thanks for watching.
@2amProFilms 6 ай бұрын
Why get the entire cockpit setup if your going to use VR though?
@KarmasGhosts 6 ай бұрын
It's very immersive when what you see in VR aligns with the physical controls and switches. Also, workflow is more efficient when you don't have to use a mouse or motion controllers. Basically it's like flying. It's so immersive that I have multiple setups for specific aircraft. I won't fly another way. Thanks for watching.
@BalesongKnifes 6 ай бұрын
YOOOOOOO
@stephenmcrae3883 6 ай бұрын
Nice setup. Questions....1. What commands do you have setup for the throttles on start (over the hump)? 2. I have the WingWing MIP setup, I am having a problem setting up DCS Kneeboard. It wants to use one of the MFD's which is much too small. Did you use a work around? Thanks Again
@KarmasGhosts 6 ай бұрын
For question 1. I use the Winwing Super Taurus ‐ I bound the Left and Right throttle over the hump (which Winwing designates as "buttons" 31 and 30) with Left and Right throttle to idle in the F/A-18C in DCS. 2. I have the Phoenix Version (No screens) of the MIP because I fly in VR. Thank you for watching and stopping by to ask questions.
@BalesongKnifes 6 ай бұрын
That is sooooo sick!!!!!!
@KarmasGhosts 6 ай бұрын
Thanks for watching!
@BalesongKnifes 6 ай бұрын
@@KarmasGhosts AND YOU REPLYED TOO OMG 😱
@SocccerRecharge 6 ай бұрын
How much does it cost around ?
@KarmasGhosts 6 ай бұрын
Thanks for watching! If you're interested in this setup all the companies and components are listed in the video description. Thanks, again for stopping by!
@OctiCupsGaming 6 ай бұрын
How do you get on with finding specific buttons/switches with the VR headset on? I’m debating something like the MIP and Quest 3 vs PointCtrl or a kneeboard mouse.
@KarmasGhosts 6 ай бұрын
I try and have a cockpit that's almost 1:1 with the plane that I'm flying. Also I have a mounting system that I can adjust/align the physical control with what I see in VR. The downside is that it's expensive, and the setup is around 10-15 mins to switch out cockpit components when I want to fly a different aircraft. But the immersion is worth it by not using a keyboard or mouse. Thanks for watching and stopping by!
@jakesvrfightclubnetwork3718 6 ай бұрын
how do I get this mod for the Huey?
@KarmasGhosts 6 ай бұрын
I have only seen the mod for the UH/MH-60. Unfortunately. Thanks for stopping by!
@longez360 6 ай бұрын
Outstanding. I assume if using the non phoenix standard 18 MIP, it would still interface with VR, albeit at greater cost and with MIP screens that would not be viewable with the VR headset on?
@KarmasGhosts 6 ай бұрын
I'm using the Phoenix MIP without the screens for VR users. I'm not sure how the Top Gun MIP interfaces with a VR headset. Thanks for watching!
@WolfTail_26 6 ай бұрын
I thought you were about to get infront of your kill then you get karma
@KarmasGhosts 6 ай бұрын
Lol...that would have been a more interesting short!
@WolfTail_26 6 ай бұрын
@@KarmasGhosts Lol
@tomwills9058 7 ай бұрын
How were tou able to mount both your panels?
@KarmasGhosts 7 ай бұрын
Which two panels were you asking about? The Winwing PTO and PCR or the tekcreations UFC and Hud control panel?
@tomwills9058 7 ай бұрын
@@KarmasGhosts the PTO and PCR, i would like to have mine mounted in a similar way to yours but I’m not sure how. Are you using monster tech mounts?
@KarmasGhosts 7 ай бұрын
@tomwills9058 Yes, I'm using the Monstertech Table Mounts Long Version. I just used the stock winwing mounts, and I ordered thumb screws to use with the T slot nuts to attach it to the mounts. Thanks for watching!
@tomwills9058 7 ай бұрын
@@KarmasGhostswould it be possible for you to link the products you used to mount your PTO and PCR panel? Because i’m not certain how many thumb screws, T bolts etc; to order. Thanks
@tomwills9058 7 ай бұрын
T slot nuts*
@ChristinanathanWesterfie-pr4jj 7 ай бұрын
I finally found this...the Short is addictive!!! Cheers!!
@KarmasGhosts 7 ай бұрын
Thanks! I appreciate you watching the short and stopping by!
@mexicannewspresenter 7 ай бұрын
brother why u using a f 18 flight stick for an apache setup?
@KarmasGhosts 7 ай бұрын
I use Thrustmaster F18 stick because it covers all the controls of the Apache until Virpil's Apache Flight Stick comes out. Thanks for watching!
@errol6788 7 ай бұрын
Great muscle memory. Unbelievable !!!
@KarmasGhosts 7 ай бұрын
Nah...I'm cheating. This older setup for the Hornet is nearly 1 to 1 and the mounting setup allows me to align the controls in VR. So if I reach out in VR, the physical controls will be there at my fingertips! Thanks for watching!
@philkock1696 7 ай бұрын
How much cost this
@KarmasGhosts 7 ай бұрын
If you're interested in this setup, all the companies and components are listed in the description. Here's a link to my full video listing all the components. kzbin.info/www/bejne/bZLMnaerr5Kbg6ssi=oXPgk5TkysfqZC1j Thanks for watching.
@xtc6106 7 ай бұрын
Where did you get the 6x6 mfd ?
@KarmasGhosts 7 ай бұрын
Total Controls makes the AH-64 MFDs they are 8.4x8.4 inches. Here's the link. totalcontrols.eu/product/apache-mpd-frames-with-desk-mounts/ Thanks for stopping by!
@anomalouswarthog 7 ай бұрын
How tf do you afford this stuff?
@KarmasGhosts 7 ай бұрын
Thanks for watching!
@szyszka1283 7 ай бұрын
Where did you buy the buttons for the ACM panel?
@KarmasGhosts 7 ай бұрын
All the buttons were included when I bought the ACM panel from TekCreations. They only thing I installed were the ACM Button and Master Arm covers and reed switches, so the covers would activate the covers in DCS. Thanks for watching.
@mayacakil 8 ай бұрын
Noise! I'm planning to buy control panel. Virpil or Winwing. Which one would you recommend for Black Shark. One more question, is collective a real game changer? I currently use normal throttle.
@KarmasGhosts 8 ай бұрын
For control panels for the blackshark, Virpil. It's difficult to find a used Winwing Combat Ready Panel for a general purpose panel. I think a collective is very immersive, especially with the specific grip for the helo! Thanks for stopping by!
@dantetrend3215 8 ай бұрын
WinWing Super Taurus F/A-18 Throttle
@KarmasGhosts 8 ай бұрын
You're not a fan of the Super Taurus? Thanks for watching!
@dantetrend3215 8 ай бұрын
@@KarmasGhosts Sure I am ! Of course I love it, I just wish I had the time to buy one. I'm looking forward to the future throttle
@szyszka1283 8 ай бұрын
Hey man i was wondering, where do you fire flares in your setup? (Im asking because i dont see any Chaff/flare button on the throttle)
@KarmasGhosts 8 ай бұрын
On the F16 the chaff and flares are controlled on the flight stick. 4 way switch on the left side of the stick. It's called the Countermeasures Management Switch. Thanks for watching.
@szyszka1283 8 ай бұрын
@@KarmasGhosts Thanks
@robweiler6711 8 ай бұрын
very impressive!
@KarmasGhosts 8 ай бұрын
Thanks, please standby for Episode 7 of my DCS setups! Thanks for watching.
@Feintgames 8 ай бұрын
I tried to winch down a rescue guy but he just went through the ground. I wish the auto hover worked better. Trying to juggle all of the rescue controls in VR is hard.
@jakesvrfightclubnetwork3718 6 ай бұрын
Where can I get this mission / mod?
@WILEY104 8 ай бұрын
do you fly permantley erect?
@WILEY104 8 ай бұрын
you have a hornet set up to.....Bob Saget
@Feintgames 8 ай бұрын
Is this VR or TrackIR? I'm trying to capture VR effectively but I'm afraid of a lot of frame drop. My 2080TI is staining already.
@KarmasGhosts 8 ай бұрын
This is VR with a RTX4090. Thanks for watching!
@Feintgames 8 ай бұрын
That boat is flying!
@KarmasGhosts 8 ай бұрын
It was hauling ass! Thanks for stopping by again!
@DiebruinKameel 8 ай бұрын
What jet is this?
@KarmasGhosts 8 ай бұрын
T-45C Goshawk. Thanks for watching.
@franktothemax 8 ай бұрын
Bro you’re leveling up at light speed with all of this. Love to see it.
@KarmasGhosts 8 ай бұрын
Thanks, Frank!
@CraigWhargoul 9 ай бұрын
Wow bro..... arma?
@KarmasGhosts 9 ай бұрын
No, DCS...Digital Combat Simulator from Eagle Dynamics! Thanks for watching!
@_.king9._102 8 ай бұрын
That’s awesome man, I’m actually making my own functional TEDAC for my setup.
@KarmasGhosts 8 ай бұрын
@_.king9._102 Now, That's awesome! I don't have space for a proper 3D printer. I've been looking at The Komodo TEDAC.
@_.king9._102 8 ай бұрын
@@KarmasGhosts thats what i was going to look into until i read some reviews and found out the circuit board layouts and materials they used i could use too. it is still not a bad one the only real issue is thats like the only one available to public consumers not just commercial sales lol
@SilasTangAndreasen 9 ай бұрын
pc specs?
@KarmasGhosts 9 ай бұрын
The PC specs are in the description. Thanks for watching!
@albertm105 9 ай бұрын
🔥
@KarmasGhosts 9 ай бұрын
Thanks for watching!
@Simpit_4848 9 ай бұрын
Great setup
@KarmasGhosts 9 ай бұрын
Thank you!
@warriyu4878 9 ай бұрын
ayo that transition was smooth as all hell man. clean ass rig to
@KarmasGhosts 9 ай бұрын
Thanks! I appreciate you watching!
@albertm105 9 ай бұрын
😎
@KarmasGhosts 9 ай бұрын
Thanks for watching!
@WaterComputer 9 ай бұрын
Can’t the virpul grip work with the warthog base?
@KarmasGhosts 9 ай бұрын
Yes, they fit on Thrustmaster Warthog Bases but some functionality lost.