F-16C Viper PC/VR Setup for DCS - Episode 5

[@pd28cat]

"DCS is free to play"

[@KarmasGhosts]

😆....The lies! Thanks for stopping by!

[@frenchfry1479]

Free to "play" not free to enjoy lol

[@josephgraboskyhfcs]

You should do a tour of the cable management systems you used. Great setup!

[@KarmasGhosts]

Good idea, even though it's a temporary setup, maybe a few weeks max, I tried to make the cable management decent so I wouldn't snag them. I'll add it the Episode 6. Thanks for watching!

[@azayomi]

I subscribed! I am considering purchasing the F-16EX Viper Throttle you have shown. I just have the Thrustmaster Hotas Warthog at moment. It would just be fun to try a different throttle. Great setup!

[@KarmasGhosts]

Thank you, Thank you! I can't say it enough. Thanks for watching and subscribing! If you're a Viper fan it's a no brainer, the detents and the manipulation of the throttle going from off, to idle, afterburner is very satisfying. When I used the warthog throttle, I always ran out of fuel because I didn't have detents installed.

[@somethingorsomething315]

This is awesome honestly, I wonder how a MiG-21 setup would look possibly.

[@KarmasGhosts]

I have a setup for all the Red Air, because they have similar controls. Episode 6 will be the F-15C. If I get enough interest I will do the Migs. I have all the Modules, but I don't want to bore everyone with simular setups. Thanks for watching!

[@ze_Steiner]

That has to be one of the cleanest setup's i have ever seen. Just absolutely amazing dude !

[@KarmasGhosts]

Thank you, I'm in the process of making a quick F16C setup update video. Here's my Updated F/A-18C setup. kzbin.info/www/bejne/iYCnZ31qitVqp6csi=i_xMjuNVWsNU2oFt I have different setups for certain aircraft including helos! kzbin.info/aero/PL8p0UJlIHXACJ4Ge49IBmwjZu6a6UxO4g&si=4IEQogUYD_pvMlv9 If you have any questions, please ask! Thanks for watching!

[@skarbimirprokopek6512]

@@KarmasGhosts Thanks for the reply! I'll have a look at the new vid. But, your throttle sits basically in the middle of the plate. Did you have to bore new holes to fix it there?

[@KarmasGhosts]

@@skarbimirprokopek6512 It's 80% on the plate. No, I used industrial velcro. I have multiple onion 2s and warthog throttles that I swap between aircraft.

[@cenkcdemir]

looks very clean and neat. the only thing you need are real screens in the mfd's and a DED

[@KarmasGhosts]

Thank you! DED and screens aren't needed because I fly in VR. Thanks for watching!

[@jaydenchaulk889]

This is pretty cool. You should get winwing’s MFD’s so you can have actual screens to use.

[@KarmasGhosts]

I am getting Winwing's MIPs without the screens because I run DCS in VR. Thanks for watching!

[@AlexGingell]

How do you find the Tek Creations panel? Considering left/right side for F16.

[@KarmasGhosts]

Tekcreations panels are functional. The fit and finish can use improvement for how much they cost. The electronics/PCB look top notch, but the mechanics seems like DIY quality. The companies creating panels are small, so they can charge the premium price. I have been finding that I use the Tekcreations panels until someone makes a better one. For the ICP went from Tekcreations to simgears and their F18 UFC to WinWings'. Thanks for watching!

[@marcelubber]

Awesome setup

[@KarmasGhosts]

Thank you for watching! Please check out my other aircraft specific setups. kzbin.info/aero/PL8p0UJlIHXACJ4Ge49IBmwjZu6a6UxO4g&si=ANoqWoFnxXCfW-1o

[@Joshua-jf3df]

yo can you link me the setup for your gaming pc. case and type of cooling/fans you have. been trying to do a build with this kind of colorage

[@KarmasGhosts]

I don't have a video of my PC setup. But here's a link to a video with my updated PC setup in the description. kzbin.info/www/bejne/jGHKfYBraMyGbJY Thank you for stopping by. If you have any more questions, please ask.

[@Stanley-px3bt]

Amazing!

[@KarmasGhosts]

Thank you! If you're interested in cockpit setups other than the F-16C, please check out my other setups! kzbin.info/aero/PL8p0UJlIHXACJ4Ge49IBmwjZu6a6UxO4g&si=UxhTGUx9qGMOf0Vz

[@nosadk]

You should get the real simulator f16 base. Worth it!

[@KarmasGhosts]

Yes, I've been eyeing their grip and base. Looks like a good piece of kit.

[@bulletstop100]

Nice rig.

[@KarmasGhosts]

Thank you! I appreciate you taking the time to watch! I have other specific aircraft setups on my channel if you're interested. Here's the link : kzbin.info/aero/PL8p0UJlIHXACJ4Ge49IBmwjZu6a6UxO4g&si=3LuoZ1qKpv6zGXH5

[@FGCH03]

What did you use to mount the mfds on the foxx and monstertech mount ?

[@KarmasGhosts]

8020, 1010, 10 Series 1 Inch x 1 Inch T-Slotted Aluminum Extrusion DIY Extruded Linear Slot Bar Rail 80/20 (36" Long, Smooth, Clear Anodize) I rough cut the aluminum, then milled the ends to make sure the cut was square. Then used 90 degree brackets to attach them to the desk mounts.

[@bandrea610]

Sick sim pit

[@KarmasGhosts]

Thank you!

[@msohm322]

How do you look around? A joystick?

[@KarmasGhosts]

In VR all you have to do is look around, just like in real life except you have limited field of view. The control column/joystick is located on the right side of the pilot in the F-16, it's not a center stick. Thanks for watching!

[@witto88]

How much u paid for all of these? I want to get this setup too

[@KarmasGhosts]

I've listed all the companies and components in the video description for all of people that are interested in purchasing this setup! Here's my updated F-16C setup for 2023. kzbin.info/www/bejne/jGHKfYBraMyGbJYsi=SivOQ71XxUoaeY8m If you have any other questions, please ask! Thanks for watching!

[@witto88]

@@KarmasGhosts thanks ^^

[@chilledburrito]

how do you get to the right panel of buttons next to the joystick?

[@KarmasGhosts]

I just reach through. Thanks for stopping by!

[@chilledburrito]

@@KarmasGhosts no, thank you for posting this, looks really good by the way.

[@davidvlk5505]

how much did it cost ?

[@KarmasGhosts]

If you're interested in this setup, here's the updated F-16C setup. The companies and components are listed in the description. kzbin.info/www/bejne/jGHKfYBraMyGbJYsi=sB2Okw87n7UgMHz4 Thanks for watching!

[@FGCH03]

How did you mount winwing panels

[@KarmasGhosts]

The take off and combat ready panels can be mounted to the Monstertech Mount using the stock WinWing mounts. I separated them for spacing and used 4040 series M5 T Slot Nuts and M5 x 20 mm and M5 x 10 mm knurled thumbscrews to mount them. If you have anymore questions, feel free to reach out. Thanks for watching!

[@skarbimirprokopek6512]

@@KarmasGhosts Great setup! I just got my PTO2 and am trying to assembe it with the same throttle you have. Did you use a special mounting plate? My Orion 2 sits on a Monstertech table mount but there seems to be far less space than on your setup, my throttle sits much further forward.

[@KarmasGhosts]

@skarbimirprokopek6512 No, I'm just using the Monstertech Warthog plate, but I mounted it underneath of the aluminum extrusion instead of the traditional top. It gave me the room I needed. Here's my Updated F-16C setup that I uploaded last night. It might show it better. kzbin.info/www/bejne/jGHKfYBraMyGbJY Thanks for watching!

[@Buzzard23100]

Free game are the most expensive

[@KarmasGhosts]

Isn't that the truth! Thanks for stopping by!

[@happynappy8490]

Literally just serve at this point

[@KarmasGhosts]

Lol, I'm retired Navy! 23 years service. Been there done that! Thanks for watching!

[@happynappy8490]

@@KarmasGhosts That adds up

[@alvinhang8721]

Wouldn't it be cheaper buying a real jet?

[@KarmasGhosts]

Image if they were?! Thanks for stopping by!

[@kev4564]

jst get a vr headset

[@KarmasGhosts]

I do, That's why I like have a full cockpits for different aircraft. So it matches as much as possible with what I see in VR.

[@ILS_Aviation]

Bro why you got so much money save some for us dawg

[@KarmasGhosts]

😆 Thanks for stopping by!

[@c144gaming]

average dcs moment

[@KarmasGhosts]

Thanks for watching!

[@Ftalat]

Touch grass NOW!

[@KarmasGhosts]

😆