i wanna buy this car wheels and more tuned 575hp is this good engine
@poncoolride2 күн бұрын
Have you tried a high stall converter yet?
@Nd_72Күн бұрын
Gettin one made now
@averageyoutuber_48723 күн бұрын
where did you get your front bumper
@gustavodragonario71785 күн бұрын
You talk too much dude 😑
@Nd_724 күн бұрын
well then lol ummm sorry
@naptamisprime7 күн бұрын
I have a m113k I'm putting in a r170 03 slk230 will this fit?
@Nd_722 күн бұрын
they make some for that but the v6 ones will not
@kurtkaster56667 күн бұрын
Seeing and hearing all the wires and cables and such snagging on that SC as it's yanked out triggers my OCD bigtime.
@take18428 күн бұрын
Hey did you have paddle shifters already? Because i was hoping since i already have paddle shifters after i solder the wires on the kit to the original paddle wires ut would just work.
@naptamisprime9 күн бұрын
How do i order this i tried looking them up and couldn't find them
@Nd_729 күн бұрын
look up Vano V-Tech Javarashvili on facebook and tell him you saw my video he will set you up
@georgedouvikas144010 күн бұрын
yo quick question about coilover swap. Could i just plug the hydralic lines that go to abc struts and use abc pump still instead of converting to the ml350 ppump?
@Nd_729 күн бұрын
yes
@gregoryoganisyan10 күн бұрын
@ND_72 Hey where can I buy a used ECU I want to put a blower on my e500
@ThatE55Kid50911 күн бұрын
If my supercharger is making noises when I took it off the car is it okay to put it back on or should I just buy a new one
@itsdoom789212 күн бұрын
So technically i can get a normal N/A m112 and slap a 32 amg supercharger on it and its gonna be the same as a 32 amg? Like same horsepower and all....will it be as reliable?
@Nd_7212 күн бұрын
it will be faster with the same boost but you cant add 30psi to a n/a motor but you can on a K one
@itsdoom789211 күн бұрын
@@Nd_72 sounds good looks like im just gonna source a m112k. Also is it okay to source a m112k with a little over 100k i think it would i heard they can last well past 200k miles
@jamesjmluke121712 күн бұрын
Good job. My SL55 only has 33k and has a slight wobble, throwing the belt off on hard pulls. Did you consider a same diameter aftermarket pully, maybe lighter and stronger? I cant believe mine is failing with low milage.
@Nd_7212 күн бұрын
The rubber still can be blown out at that low of miles
@khalidmohammed642812 күн бұрын
Did you drop the tire psi?
@Nd_7212 күн бұрын
nope
@gregoryoganisyan13 күн бұрын
So all you did is just bolt it on a supercharged?
@Nd_7213 күн бұрын
yep I made a how to video on it
@frias228713 күн бұрын
Good job bro 👍
@Nd_7213 күн бұрын
I got more coming soon
@phil2505113 күн бұрын
😜😝👍👍👍👍👍👍
@Ricky50scJustalil6cylinder13 күн бұрын
Love your videos man just be careful with that weight that can badly hurt you in case of accident
@Nd_7213 күн бұрын
i want to mount it more safe soon. but this is for testing
@smsunder13 күн бұрын
Very cool! I like the Dragy mount you're making...what is the price?
@Nd_7213 күн бұрын
they are 25 shipped in the us
@Nd_7213 күн бұрын
hit me up on instagram
@poncoolride13 күн бұрын
The video we have all been waiting for!
@Nd_7213 күн бұрын
happy to be told that
@poncoolride12 күн бұрын
@@Nd_72 I'm trying to decide whether I want to put a supercharger on my 320, or buy a AMG 32, or maybe a SL55 AMG. Mostly I want to drag race. This death cart is definitely cool. Any advice what I should do?
@Nd_7212 күн бұрын
@@poncoolride if you find a cheap sl55 do that But I will say this the m112k set up is wayyyy easier to work on
@poncoolride12 күн бұрын
@@Nd_72how possible is it to run 10's in the SL55?
@Nd_7212 күн бұрын
@@poncoolride you can run 10 sec in all 3 set ups on stock blower
@Streetwerxgarage14 күн бұрын
Had the same problem I brought the part and it didn’t fix anything. I just got my brand new bosch alternator
@poncoolride15 күн бұрын
These will fit an SL55 AMG also?
@Nd_7214 күн бұрын
no sorry
@poncoolride16 күн бұрын
Id like to buy a complete supercharger syrtem for my slk 320. Any idea where I could find a good deal on one? Id really like to do this with mine and go racing. Thank you!
@Nd_7213 күн бұрын
hit me up on Instagram and I will help you out
@gavinblack751118 күн бұрын
You have a coupon code for MSC?
@Nd_7217 күн бұрын
no not yet sorry they might help you if you say you say my youtube
@savostanivukovic980118 күн бұрын
That car looks like a lot of fun 👌 Where did you get that ND72 emblem for supercharger?
@Nd_7216 күн бұрын
had it custom made. If any one wants one or a custom one i can get more just let me know.
@savostanivukovic980116 күн бұрын
@@Nd_72 how do I contact you about making that purchase? Thank you.
@Nd_7213 күн бұрын
@@savostanivukovic9801 hit me up on Instagram
@frz_6418 күн бұрын
You are doing good work, thank you for your videos 👍
@Nd_7213 күн бұрын
happy to see people like my videos
@justinL-kp1px19 күн бұрын
Yo nd love the content been subed for a few years mabee a ss kitchen strainer for blocking the ice i doubt it would cause any restriction as there like 4 or 6 inches like i have and isnt that fine of mesh just an idea you may already have one 👍
@Nd_7213 күн бұрын
I need to go to home depot and look around fro random things that might work
@justinL-kp1px12 күн бұрын
@@Nd_72 they should have something you could use 👍
@senseimarvin45420 күн бұрын
not a CWA400, the 400 does NOT have a bolt on impeller housing. I think yours is probably a CWA200, it has a bolt on housing. and i think the flow of the 400 is twice the flow of the 200.
@Nd_7213 күн бұрын
that could be right but still at under 100$ it is hard to find better
@fishingwithcritter20 күн бұрын
Screen may restrict water flow and or cause pump cavitation. You want to put bars in front of inlet almost like a jail cell.
@Nd_7213 күн бұрын
there ae a few people saying to do a t bar set up
@LeonBeane20 күн бұрын
Hi there buddy I’ve got an intermittent rough idle on my sl55 feels like it wants to stall sometimes but if I turn it off and back on again it idles fine again for a while then back to rough after driving it, I’ve replaced the plugs, map sensor, crank and cam sensors still no change also have a fuel smell in the cabin, no stored codes, any ideas? thanks in advance
@carlosr106020 күн бұрын
Get some DuPont brake pad paste from Mercedes, apply it to the back of the pad , it works really well for quieting the squealing noise of your vehicles brakes.
@Nd_7220 күн бұрын
i might just upgrade to clk55 breaks to drop some lb and have a way better set up
@poncoolride20 күн бұрын
@@Nd_72do they just bolt on?
@poncoolride20 күн бұрын
@@Nd_72I hope you make a video of that.
@Nd_7213 күн бұрын
@@poncoolride I am they should. I did it on my clk430
@soincthehegdegoh20 күн бұрын
My 04 CLK 55 has the ability to shift gears manually with paddles in any driving mode, and as far as I know its completely stock, no aftermarket tune. Could it be so that US spec cars don't have this feature since mine was sold new in Germany?
@archieez21 күн бұрын
I have a 2003 SLK 32 AMG for sale
@Nd_7221 күн бұрын
why are u selling it
@archieez21 күн бұрын
@@Nd_72 I'm moving to Europe in 3 months and I need to sell it
@poncoolride16 күн бұрын
Id like to buy it!
@archieez16 күн бұрын
@@poncoolride where do you live? I’m in Chicago
@poncoolride16 күн бұрын
@@archieezI'm in Washington state.
@GabrielJulia-u9v21 күн бұрын
Jackson Linda Moore Kimberly Lee Susan
@uzzle2124 күн бұрын
Wassup bro, Question for you, Do you recommend the underhood tank? Or the Little reservoir, been getting mixed opinions on it and i wanna use whats best
@Nd_7224 күн бұрын
what is your pulley set up?
@uzzle2123 күн бұрын
@@Nd_72 So everything im doing is LTH w x pipe 77mm pulley Bwk 550cc injectors 1 step colder plugs PLM XL (Installed with 010)
@uzzle2122 күн бұрын
@@Nd_72yoyo any word?
@Nd_7219 күн бұрын
@@uzzle21 trunk tank would be way better but a little reservoir will work
@Sikici_Usta24 күн бұрын
It does not matter how often you upload, as long as you upload that's all that matters!
@Nd_7224 күн бұрын
thanks
@YourFloridaLand24 күн бұрын
Only 20nm Brutus...only 20 😅
@Nd_7224 күн бұрын
I been doing less then that
@jvakos26 күн бұрын
Amazing job and capturing all the details thank you so much! I had these installed on my 04 SL55 and trying to sort out ideal ride height. I am doing 70 centimeters from floor to wheel arch is that about what you went with? It’s 3 fingers front and 2 rear from tire to wheel arch. Thanks again LMK
@Nd_7224 күн бұрын
happy to help
@johngrefe223226 күн бұрын
Is the crank pulley tool the same at E55 / SL500 tool? The tool manufacturer doesn't list the SL55.
@Nd_7224 күн бұрын
yep
@denniscasasnovas740226 күн бұрын
Hitting the invisible paddles lol.
@Nd_7226 күн бұрын
lol lol yes i use them all the time in my slk32 lol lol
@denniscasasnovas740226 күн бұрын
@@Nd_72 I know how it is going from my Redeye to my crossfires lol
@wolf1597Ай бұрын
If you have a 77mm cluch pully and you install cluchless also 77mm would you need a retune ?
@Nd_7224 күн бұрын
yes
@DucatiguyNHАй бұрын
What are your plans for adding the sway bars? The Black series has steel springs with swaybars. Without the ability to tie the two sides of the suspension together could cause undesirable effects in a hard corner.
@Nd_7224 күн бұрын
not going to. my sl55 rides great
@brandon-wz9hrАй бұрын
Will these work for a 04 NA crossfire?
@Nd_72Ай бұрын
shound
@brandon-wz9hr28 күн бұрын
@@Nd_72 got any links ? for that trying to find then but zip
@Nd_7224 күн бұрын
@@brandon-wz9hr no sorry but you can hit hem up on facebook
@SarahKennedy-u8eАй бұрын
Where can I get the clutch delete for my M1 12 supercharger
@Nd_72Ай бұрын
v_tech
@SarahKennedy-u8eАй бұрын
Does anybody know what the number is part number for the aftermarket supercharger pulley so I can deal away with my wire?
@Nd_7224 күн бұрын
hit up v tech he sell and tunes them
@jerenbrennen7406Ай бұрын
This just happened on my 55 coupe yesterday, pissed coolant all over the road and I thought it was over lol. Did a little research and watched your video and turns out it was just this little hose. Thanks bro
@Nd_7224 күн бұрын
happy to help and save people some cash
@adamtheman1Ай бұрын
I have to move as I got housing and can't have my car there. It's a 2001 slk320 with 65k. I'm 2nd owner and have to do something with it. If you want to buy ill do for you way cheaper with the hopes of seeing on your channel. Hit me up ill send picks if interested. No check engine starts right up. Must go by or near the 1st.
@Nd_7224 күн бұрын
not looking fo a slk320 unless it is 500$. but good luck
@adamtheman124 күн бұрын
@Nd_72 yea for you it could be. I'd rather get less and k pw it's going to a good home. But book is alot more. Just moved into new place today and the cars got to go....
@jbass8420Ай бұрын
What gauge is on ur fuel rail?
@Nd_7224 күн бұрын
rob from needswings.com sells the kit
@jbass842024 күн бұрын
@@Nd_72 thanks! do u have a Facebook?
@PlanetZoomАй бұрын
I’m curious about the the video of you fixing the sc pulley bearing and I thought you would have done the 77mm pulley upgrade
@Nd_7224 күн бұрын
not on my sl55 I did on my e55 and cls55
@ipw9001Ай бұрын
Hey ND, great video. I had a question about the solenoids if you don’t mind getting back to me