You need to add a ground wire to the chassis or converter ground from the GND terminal on the fridge.

How’s it holding up long term?

How is it doing 2 years later?

I hope you put dicor on the screws for that panel. If not that roof is going to rot and fail.

nice work

You left out the most important thing, how much charge was left on the battery after 24 hours . If it gets cloudy, a small generator will be cheaper to run than the RV.

Great video! How has the Everchill unit held up? Any concerns?

You can’t keep it in your driveway?

Please TURN OFF THE GAS if you do this at home. Otherwise nice vid

Couldn’t a person take a 2 way fridge and plug it into a socket from a larger (2-3000w) inverter from a 12v supply? Yes a bit more energy consumed from inverter. But no need to buy a new fridge?

Vent covers are 20 to maybe 35 bucks depending on where you get it and the manufacturer Maybe 10 minutes & all fixed

Always have a Professional L.P. Gas Expert Do The Work

RV RECLINERS VERY MADE REALLY CHEAP🤮

Would never rent an RV out. Maintain 100% & when one sells it, the RV will be in Great Shape new owner. Personally would never want to own an RV, made so cheap walls, insulation, framing & electric wiring not accessible ya have to tear the walls to get to.

Easy fix. Issues with height is one of the most common insurance claims in this business. Make sure you explain clearly to them about height!!!!!

Do it yourself $100

Who in their right mind, rents their RV out to total strangers? Especially, to people that are not familiar with all the intricacies of an RV, Of course, things will get broken. And, it's expensive even if they have the item in stock. I'll bet you have to purchase a special type insurance to cover all these potential issues. Good luck with that.

great job !! with patience comes success!!

⚡Double Recliner RV Sofa► amzn.to/49nAZp3

You might want to verify the gauge of existing wire is heavy enough for the amperage of the 12 volt new one. I watched a dealer replace one and they ran a heavier gauge wire back to the battery. May be okay, but something to verify. I want to do this as well, so watching you pave the way was very helpful. Thanks!

You are being sold a bunch of garbage

I've noticed of my system Get more battery storage so you won't stress out your 50% discharge.

Couldn’t you have just turned the gas off 🤷🏼‍♂️

I think the manufacturer sometimes build around things like refrigerators, that way they can justify the cost when they fail. Not everyone has the patience to do this kind of work. Nice job 👍

Is it still working good? And do u use it in high temperatures?

I’ll not give up my cool with gas ability

DO NOT USE TAPE ON A Flare Fitting

An old battery connected to a new battery will cause the old battery to pull the new battery down to its performance level and ultimately destroy both batteries. You need to buy batteries together from the same manufacturer and same model and hopefully with the same manufacturing lot number. Also, the wire you are running that refrigerator on is WAY to small. You will have a voltage drop and make the compressor work harder. Or, if not properly fused, cause a fire. I'm surprised you have not been having issues with this.

It seals at the flare, not the threads. If you use tape, you could stop the flare from seating all the way. Loose the tape on a flare/compression fitting

Thanks for the video. I'll be doing this in the next couple of days.

When my RV fridge craps out this is what I'm doing.

The question in the title of this video was never answered.

Thanks for the video, so useful and direct.

Replaced two Everchills. When it fails, get a dometic, it's wayyyy better.

Nice vid. I would suggest you use 10 awg wire though as Everchill indicates in its manual. Otherwise, you can have intermittent shut downs when battery voltage drops a little.

What size cap did you purchase?

Hey you do not put tape on a flare fitting

Thanks for this! Saved me time.

Never use thread tape on gas line they will leak. You use the liquid teflon. Just say this for your safety and other.

Another video said to purge the line of gas first, after turning tank off. That video showed it to take just a few minutes. I tried that and 5 minutes later all 3 burners were blazing away! how long does it take to purge the furnace line of gas?!

Can u use plumbers tape also?

Nice looking project. One major issue I see (and I've noticed it on several youtube videos) is that the outside "skin" of the refrigerator has insulation laying against it. The outside of the refrigerator needs to have an inch for air to freely circulate and dissipate heat. I'm planning to do a similar change out for a small trailer. Since the upper and lower outside air vents won't be needed, I was hoping to find some flush mount Dometic blank off doors. Nothing so far.

I got the same fridge and I love it and I'm about to put a big battery Bank in there

Why didn’t you KZbin the uninstall??? 😢

You didn’t need gas line Teflon tape. That fitting is a flare joint. Teflon does absolutely nothing for flare fittings.

Great Video my friend What make and model was your old frig

How do you turn fridge off, do you have to hold the button for a amount of time.

When you put your batteries in parallel, you will have less power. Tiny differences in voltage cause them to fight each other. On separate chargers, they could power separate loads.

Link to laser thermometer?

Nice job, keeping it positive and overcoming little problems. I gotta do the same on my rig.