Not happy with the hodgepodge design jeep went with. Jeep is cracking up to be a joke. Could have got an old trail duster and had the same top off experience but with a more reliable platform. Not to mention a v8. This is my first and last jeep. Ill be buying a wideopen designs tube buggy next. Yes i can get it street legal snd no it wont have a d30 or crappy parking brake.
@mclarkallen3 күн бұрын
taught me something here..... loading on the right. throw "your butt" in 1st. love it. can't wait to try it.
@92813justin2 күн бұрын
@@mclarkallen that’s awesome, hope it works out for you
@donofchron42044 күн бұрын
How to backup a trailer in reverse?😂? Is there any other way to back a trailer???😂
@winstonramprashad8665 күн бұрын
Great,job. Thank you.
@fabianS-bn9ev7 күн бұрын
Muy bueno el video…
@LuisVillanueva457 күн бұрын
Thanks for the video! Much appreciated
@TugXor9 күн бұрын
great vid
@oscargarcia14579 күн бұрын
How many quarts did you use total ?
@stevenharris506410 күн бұрын
Love your videos, brother! I’m currently in the market for my first boat. Looking at 90’s Nautiques and Mastercrafts. Got any advice or recommendations? Should I just find a friend that owns one and let that suffice? Ha!
@firnatine6712 күн бұрын
Can that sensor be mounted to the Off Road Grille?
@ChadNugent-w4w15 күн бұрын
This video was awesome!! It literally saved me a thousand dollars and hours of work. Thank you brother! You rock!
@ChiliStyles16 күн бұрын
Great method to work the issue.
@92813justin12 күн бұрын
@@ChiliStyles thanks, this has been a 5 year intermittent ordeal
@ChiliStyles11 күн бұрын
@@92813justin the biggest issue I had with my Moomba was idle or starting when engine hot. but was a really dirty Holley carb
@thomasjanssen828216 күн бұрын
Did the speakers work good with the stock amp dose it sound good? My stock speakers are trash
@HellomynameisGuts16 күн бұрын
Do you still use this method?
@billsnyder682617 күн бұрын
Good job
@antoniowade331819 күн бұрын
I have to admit, this is a great tutorial, I really appreciate your content and video..Wade Out..
@jayleng963022 күн бұрын
Also if your a beginner take your classes off
@DeanReed-z7s22 күн бұрын
Does this work on 2023 model? It’s still 3rd gen.
@Acura1NSX22 күн бұрын
It is better to remove the top cap first so there's a better vacuum when you loosen the drain plug on bottom.
@ChiliStyles24 күн бұрын
Mine broke on the middle of the lake. I was so happy I had a spare and the socket to remove what I needed to get to it.
@92813justin24 күн бұрын
Wow! You are super prepared, keep it up
@piotrk219124 күн бұрын
Great video like always. Was missed 😂
@92813justin24 күн бұрын
Thank you!!!
@chrisb686629 күн бұрын
Too expensive. I'll make my own. Simple......
@mindiadams1895Ай бұрын
Thank you!! We'll see how I do this weekend when I have to drive a uhaul 🫣
@BigbaconАй бұрын
Can you back up a trailer not in reverse?
@josiahupton9723Ай бұрын
Dude, you are the BEST! I watched several videos before I found yours. All of them had the first third of the video filming themselves, talking, reminiscing about childhood, etc. YOU jumped right in and got it done. I can't tell you how great that is for me. My 2011 F150 with 217K has a/c again for a couple hours (2-3 beers) and $37. Keep doing what you're doing!
@92813justinАй бұрын
@@josiahupton9723 thank you! I appreciate it!!!
@simcptmikeАй бұрын
How to backup a trailer in reverse? I want to see how to back up a trailer forwards 😂😂
@louisianaguy2661Ай бұрын
I recently installed new speakers in my Tacoma. Just fyi for anyone about to do this, it is easier to mate the speaker to the adapter bracket first, then mount it to the truck door as one unit. When I mounted the speaker to the adapter, I put a thin bead of silicone around the speaker edge first, then set it on the adapter then screwed the speaker to the adapter. It is probably unnecessary overkill, but I did not want the speaker to ever vibrate and rattle on the adapter. Also, I installed the wire harness adapter onto the speaker and zip tied the excess wiring to the speaker frame so that just the plug was sticking out of the hole in the adapter. I did not want extra lose wiring hanging inside the door and possibly get caught on the window mechanism. New speakers sound so much better than the junk speakers from the factory.
@Durwood-xh2tnАй бұрын
Great video a little suggestion sir how to do it with a spotlight
@ericperkins2939Ай бұрын
Great helpful video. 👍
@armyuvmeАй бұрын
If you leave dip stick in and oil cap on until after you've removed the drain plug, it may slightly slow the flow.
@VengancejrАй бұрын
I would be worried about getting any amount of brake clam in the oil pan
@frozenlake9140Ай бұрын
spray nozzle
@cyb5761Ай бұрын
Paid $30.00 at parts store. The only marking on the side of the new filter was an arrow that showed air flow so I had to figure out which way the air flowed. I think it flows downward. And I think the solid edges went on the right and left sides.
@prestonhanson501Ай бұрын
Its better to over fill it so you dont have to refill it taking more time. If you got 2 liters put 3 in. Saves time to over fill it then drain the excess
@farmingtonctyesteryear8544Ай бұрын
Those 10 bolts holding on tranny pan are a PITA. They are threaded completely through the housing so the tops of them are exposed to weather, and gravity makes sure corrosion gets packed in tight. 4 of mine snapped, 60,000 miles . I snapped off N “easy out bit on one, so it’s a complete shit show on 1 hole now. Other 3 I drilled straight thought and re-tapped them. Easy enough but be careful on those 10 bolts
@farmingtonctyesteryear8544Ай бұрын
They are grade 4 bolts. Got 8.8 grade now, pan was pretty clean, little sludge on magnets, no metal. I plow and tow so I was happy
@ThePeoplesMayorАй бұрын
Thanks man. Doing my oil change rn and couldn’t get em off the clips after unbolting lol
@ThePeoplesMayorАй бұрын
14mm is the only one I need. Thxs
@antonioflores5223Ай бұрын
Do you have a part number for the light harness
@boomvoyaj9998Ай бұрын
Guys, I have a 2000 Land Cruiser VXR, but I do not know the oil number, knowing that I am in the Middle East. I hope for your help, thank you.
@smreder67Ай бұрын
Watched video, took me longer to find the correct size sockets than it took me to make the fix. After re-hooking the electrical connector, I started the truck, and turned the heater control back/forth for the slots to line up before tighten the front screw down .
@LindaParker-e5gАй бұрын
Looks like you had to cut out a square from the back panel to make it fit.. Is that what you had to do?
@cowboycowboy1492 ай бұрын
Thank you it was a nice video
@LucidDreamer543212 ай бұрын
Did you really need to specify that you are backing up "in reverse"? Did you think might confuse it with backing up in forward?
@kamlok35602 ай бұрын
very helpfuly, subscribed~
@Ghost5.42 ай бұрын
Mine hasn’t stopped doing the shaking shit
@FrankYb-zz4mr2 ай бұрын
I'm 43 and have never driven with a trailer until my job needed a load everyday and nobody to do it. You help me out a lot. And I want to tell you thanks, man you had me reversing like a pro. I owe you big time
@michaelwhittier66312 ай бұрын
Great job
@donfinkey6922 ай бұрын
When did you last change your oil? Looks pretty dirty.
@trainsnthings20862 ай бұрын
Those speakers in the f150s are shitty as hell I have same truck a 2012 lariat with same shitty speakers replaced all of them and sounds great