3:55-4:15 Great 👌💐🙏

Best video explaining tilt effects

Well done ✅

How much loss if tilt has a difference of 10 degree from Latitude??

Dear looking at the tilt angle of panels at your back, it seems youare standing at equator. You are right but none of the installer cares for azimuth and tilt resulting in a large waste of production of the user.

Such a good video. Thank you

ise Urdu mein Jyada Behtar tha

I want to do aluminium fabricated elevated structure for 5 KW roof top solar panels. Clear space available in roof is about (10mtX2.7mt ) 27SqMt Thanks

Excellent video. Do you have establishment in Kolkata ? If yes please convey the contact details Thanks

Uniqgrid offers competitive DGPV sync and Zero export system.

Does the local discom allow this. As I heard a slight percentage is allowed.

Gd awareness

Very nicely explained. Gd awareness for consumer.

Bro my panel producing low volt

But sun is not static ... Therefore we required full day study

Congratulations for your this project I request you to kindly replace or make any solution for my on grid inverter which has been to your Ahmedabad office from chandigarh since four months. I urge you to kindly look into this matter as sort my problem

The company bragging a lot about their sustainability reliability and blah blah but they unable to provide customer support as my so called world class superior quality inverter has become faulty after only 1.5 to 2 years of working and now company has not made any solution for the same. I would not recommend to for this company at all

I am facing an issue with zero export device where when there is uneven load on three phases the zero export device is unable to fully stop the export. I am using Aiswei Solplanet G2 20kw grid tie inverter with compatible free export device.

Sir, one matter you not cleared that which direction of arrow should be set of zero export device

Very informative video. Away with the music though. It's annoying.

Thanks

If suddenly load falls below set 30% of dg , will solar generation also stops??

Dude, You called the "male" connector "female" and the "female" connector "male" connector...

i am living in nagpur and installing monocrystalline hal cut panel kindly advise the tilt angle and orientation please

Based on your discussion, did you recommend the same to the owners of the building you are standing on. Their solar panels look flat on the roof.

The core problem is tilt angel changes every month for example, in my area for the month of March it is 28 degrees and for the month of June 13 Degrees.

QUESTION - If you live at the Equator. Which direction do you tilt your panels? 🤔

great explanation

Thank you so much sir. This video has helped me alot.

How we can buy

Please provide zero export device for 3kv solar system

good information but that music is WAAAAAAY too loud!

Thank you! That was a straightforward answer. You explained it perfectly.

is the radio still on? can't hear what he says, the musak is leveled with his voice, damm

tnx

Why at the time of DG sycn with solar pf goes down upto 0.20 and then DG Trip

I don't care how often they blame us for not buying the same brand as the panel or not having an expensive crimp tool , the MC4 is a bad decision for solar. It is a standard which is not standardized! It's not easy to install or use. Anderson works quite well but not IP rated. I guess that direct connections are the cheap and reliable solution, but sometimes we want to disconnect or change.

Thanks Pro

Thanks very much for your presentation, very good thankyou. So then if the mpp is between 125 to 450 V DC then we should be fine to connect up enough series connected solar panels , just as long as the total output voltage from the connected panels, does not exceed the maximum mpp allowable DC voltage to input side of the inverter. Thanks again for the clarification.

Very nice sir

Use original connectors only, third party or fake connectors do not form a proper seal. If you can rotate the connector while keeping the cable stationary the seal is improper and please use the proper wrench for tightening the connector like the blue MC4 wrench tor MC4 connector, tighten until your can hear the click and the wrench slips. Use connectors from a grade reputed manufacturers like "Mulitcontact companies MC4" not any other company and amphenol H4, etc.

nice

You never ground the panels to the same pit as the LA, you will fry everything up. This video is misinforming people.

Do you have any documentation from the manufacturers or the regulators telling to separate the earth pits for AC and DC because I wouldn't believe that they have to earthed separately. Only the LA needs its separate earthing pit and conductor.

Bahut acchi jaankari di hai, मै सोचता था कि सभी एमसी 4 कनेक्टर एक से होते हैं। यदि कोई भी व्यक्ति अपनी आवश्कता से कनेक्टर लेना है तो उसे कनेक्टर में क्या विवरण बताना ताकि, एक से कनेक्टर ले सकें।

Super sir

Do you have 3 phase evvo inverter?

Can I invest in your company

Kesi angrez ka bacha