rnodern

Пікірлер

@NotGlitchyy 22 күн бұрын

Sounds like Ian says ‘Animate’

@rnodern 21 күн бұрын

He does, yeah. He also sounds really drunk 🤣 the song is really called Animation, though.

@drixxv2435 Ай бұрын

Same pitfalls by boss. They cannot make a decent OD or distortion box that can sound realistic without sounding thin, boxy and digital. I would prefer playing a DIY bluesbreaker over any of the OD offered on this gt1000

@rnodern 29 күн бұрын

…..k Using their tube screamer in front of a valve amp sounds fine to me

@riansfn5380 Ай бұрын

The only difference I hear is the core has more presence than the SE.

@WinItReigns Ай бұрын

Great video😊

@anishchakravartty2153 2 ай бұрын

Can we reamp dry di tracks recorded previously through this setup to use different speakers and mics to capture the sound coming for the amp?

@tomrband-sh4hf 3 ай бұрын

Hi. Did you set your main output select to record? And did you set have IR on or off(for cabinet)

@bendydk 5 ай бұрын

Were did u download the Ola path

@rnodern 5 ай бұрын

In the description of his GT1000 video kzbin.info/www/bejne/qqS7dHxnj8uab5osi=_MAQSA0gNP16a1Qh

@bendydk 5 ай бұрын

Do you know we're to Find he's other patch, the ones not for 4CM ?? I know he makes amazing patch on the boss gt 1000, but can't find them

@ashleyjackson8538 7 ай бұрын

I’m lured in by the maple necks .

@clifforddang5947 8 ай бұрын

This is by far the greatest instructional GT 1000 video, thank you, I really appreciate this!

@rnodern 8 ай бұрын

Wow, thank you!

@clifforddang5947 8 ай бұрын

@@rnodern I'm hoping if I can ask you a question, after a patch is saved is it in the USER area or will it also be in PRESET area?

@rnodern 8 ай бұрын

@@clifforddang5947hey mate, no it isn’t available in both areas. I tend to always save my patches in the user banks, that way I don’t have to cycle through to the preset banks to land on the patch I’m looking for.

@clifforddang5947 8 ай бұрын

@@rnodern Thank you so much!

@davegilmer_Storyville4Life 8 ай бұрын

Saved, appreciate it, thanks

@FKinGen 9 ай бұрын

so good

@52BLUE 9 ай бұрын

When the fuck is this album coming out?!

@flaviog.4411 10 ай бұрын

Thank you for the explanations! I've got a question: what if my amp has got only 2 channels? what kind of cable should I use?

@rnodern 10 ай бұрын

That will depend on what your footswitch cable looks like for your amp. Is it a TRS cable or a Mono cable? Keep in mind that some amps need to be controlled by MIDI

@flaviog.4411 10 ай бұрын

@@rnodern It’s a mono cable (Orange TH30) I tried with it but it doesn’t seem to work so I’ll try with a trs cable ..

@billhinsperger8120 10 ай бұрын

Eh buddy I’m using this method I’m using the gt to switch the 3 channels in my boogie I want to insert an external distortion pedal for my rythem and lead channels where would I put this pedal so it automatically turns on and off when I switch channels

@rnodern 10 ай бұрын

Hey mate, I do this too. Take a look at my pedalboard now: i.imgur.com/TXMEo6i.jpg Okay, so I am assuming you’re using 4CM as described in this video. In the second send/return on the GT1000, run a cable from the send to the in on your pedal, and run a cable from the out of your pedal back into the return of the gt1000. Send/return Loop one is used for the 4CM, and the second send/return loop can be used for additional analog pedals. When you are designing your patch, start with selecting which amp channel you want to use. Engage send and return 1 and 2 (1 is required unless you don’t want to use the amplifier preamp) then place send/return block 2 wherever you want it in your signal chain. If it’s distortion, place it just before send return block 1. Save the patch and it will change channels and engage your analog pedal when you switch to that patch. Note: the pedal has to always be on and engaged, you’re just inserting and removing it from the signal chain in your patch design. You may notice I have many pedals. I’m using a Voodoo hex midi switcher. So, the send/return block loop is sent to/from the voodoo hex. All my analog pedals are plugged into the hex. Then, I send a midi signal to the hex to activate certain pedals in my patch design. It’s super cool if you want to combine the GT1000 with multiple analog pedals.

@billhinsperger8120 10 ай бұрын

@@rnodern thanx bro

@billhinsperger8120 10 ай бұрын

Eh buddy one more question lol I made a patch I can’t figure out how to assign it to bank 1? Or any of the banks lol when I go to the control function menu and click on any of the banks it doesn’t give me the option to download my patch I made

@rnodern 10 ай бұрын

@@billhinsperger8120hey mate, you select which patch (bank) when you save or write the patch. Something like U1-1 will be patch one bank one

@billhinsperger8120 10 ай бұрын

@@rnodern ya I followed your method it’s Awsome but once I complete my patch I go to write and it saves but does not give me an option to assign it to a bank? And when I go to the assign menu it shows all the banks but when I click on any of them it just brings up effects not patch options, are u saying once I write it atomically goes to bank 1?

@Subcritical96 11 ай бұрын

Wow! Learned a lot.

@stevelamb6720 Жыл бұрын

Great tutorial at a pace that is easy to follow.

@RicardoGarcia-zk3zp Жыл бұрын

❤🎉🎉🎉🎉wow imdit it ando it sound awesome ❤❤❤❤ thanks a lot bro

@areen5004 Жыл бұрын

is there a way to record 4cm in a daw without using a mic?

@rnodern Жыл бұрын

Take a look at a “Universal Audio OX Amp Top Box”. Sits between the amplifier 4,8,16 ohm out and the speaker. Basically it is a reactive load box, but capable of emulation and has xlr/usb connectivity

@areen5004 Жыл бұрын

@@rnodern oh man that’s about expensive as a tube amp I think I’ll just think with the arid amps through the monitors I just gotta mess around it to achieve a good tone

@areen5004 Жыл бұрын

@@rnodern thanks anyways though was an insightful video

@johnrinehart8866 Жыл бұрын

I’m so ready for another album from them!

@Log.Rhythm Жыл бұрын

I think we'll die waiting, been waiting since 2010 🤷‍♂️

@TheIbanez21601 10 ай бұрын

@@Log.Rhythm*2013

@petkopeet Жыл бұрын

Is there much diffrence in feel between wide fat and thin neck carvs?

@micahwatz1148 Жыл бұрын

I havent had luck with the mesa ms effects loop. Even with the mix set to 100%

@NinNinOfficial Жыл бұрын

AJ we need more videos like this

@NinNinOfficial Жыл бұрын

Awesome video AJ

@mywaveinwoodswoodperfumes Жыл бұрын

The thing is, can I connect it to iPad

@rnodern Жыл бұрын

Yep, the Boss GT1000 app is available on iOS devices. It connects to the GT1000 via Bluetooth.

@SeanGolf Жыл бұрын

Just back because I can’t wait for this album to come out 😢

@ScottMacLeodCompany Жыл бұрын

Best comparison video I've seen on these 2. I just bought the SE, so it's good to know.

@tractorgt Жыл бұрын

It may have been interesting to note that the neck profiles have changed over the years as well. From what I understand it is now closer to an SE standard/custom neck, wide thin. I remember playing one of these guitars at Sam Ash around 04, and the neck was way fatter than my Les Paul. So much so I wasn't interested. I have an SE standard that I love and I'm hoping the new Tremonti has the same neck like it says.

@MyNameIsMel2007 Жыл бұрын

hi AJ, the 2nd patch you made, is that for lead / solo? I 'd like to get tone of Kirk Hammet which is also a lot of tapping on his solo.

@rnodern Жыл бұрын

Hey mate, it wasn’t - I just made it for demonstration :) For a Kirk lead tone start with the amplifier. Go for the modern voicing on your rectifier, channel 2, or if you have a 3 channel recto, then channel 3. Bass just above half way, mids below half maybe 9:30, 10 o’clock..and treble above half. Presence can add fizz so use sparingly. Then on the GT1000 throw a crybaby wah up the very front, followed by a tube screamer. Chug away and keep increasing the gain on the tube screamer until you’re happy with it. Won’t really need much to push the preamp on the recto and result in a nice tight gain sound. A compressor helps if you’re tapping to keep your notes more consistent. He’d also probably be using reverb in the fx loop. This isn’t a recipe, just how I’d approach getting close to his sound

@MyNameIsMel2007 Жыл бұрын

@rnodern will try that mate. How about the drive knob? Should it be after 12:00 or before? I heard this amp can be hard to get a lead tone. We'll see. THANKS much bro!

@MyNameIsMel2007 Жыл бұрын

hi AJ, I tried 4cm on my Dual Recto with gt 1000 but the problem is when I put the effects (delay) after the send/return1 I can't hear the delay. However if I put it before the send/return it works. I can't figure out the problem. Any thoughts? thanks

@rnodern Жыл бұрын

Thanks for the question. Hmmm that’s really interesting. First thing I’d check is the 4CM cabling, making sure it’s actually going through your effects loop. Next I’d check the back of the amp to make sure the fx loop is on (not bypassed) and volume is turned up. My dual recto has a fx loop volume on the back. Next check the two master volume knobs over on the left side near the power switch (not the master volumes on each respective channel). Perhaps the delay is sitting in one of those switching loops that isn’t engaged? - in tone studio the part of the signal chain that splits off into two separate paths. Lastly maybe a wet/dry setting on the delay but I’d expect that would also be apparent either side of the send return block. Good luck man! Let me know how you go

@MyNameIsMel2007 Жыл бұрын

@@rnodern thanks bro, it's working now after I switch the fx loop to on.

@afocante Жыл бұрын

Do you also have some video explaining connection the GT-1000 in front of the valve amp ?

@afocante Жыл бұрын

Do you share those patches?

@afocante Жыл бұрын

Best 4 CM explanation I ever seen, thanks for all that !!

@bcrocks3935 Жыл бұрын

this 1000%!!!!

@afocante Жыл бұрын

Man, you should work in some Radio Station !!!

@billhinsperger8120 Жыл бұрын

Wat output setting on the gt should I be on with this setup?

@rnodern Жыл бұрын

Thanks for the question. It depends on your amp. Take a look at page 39 here static.roland.com/assets/media/pdf/GT-1000_parameter_eng08_W.pdf - Find the closest to your amp and select the one ending in RETURN if you are using 4CM.

@rnodern Жыл бұрын

For example. With the Mesa Boogie Dual Rectifier I am using (with either a 412 or 212 cabinet), I set the Output Select setting to "Rectifier 412 RETURN"

@billhinsperger8120 Жыл бұрын

@@rnodern thanx dude. One more thing can I use the gt in front of the amp like a pedal board only and still use channel switching on my messa?

@rnodern Жыл бұрын

@@billhinsperger8120 sure can. Just connect the main out of the gt to the main in on your amp. (Change output settings) to whatever suits the amp/situation. Design your patches without engaging any send and return blocks (green box when engaged with up and down arrow). Roll all the way to the right to the last block and inside there is the amp channel selection. Connect the foot switch jack on your amp to the foot switch out on the GT and you’re good to go.

@rnodern Жыл бұрын

From memory, on the GT it’s called Amp CTL or something

@DonDiegoMorel Жыл бұрын

This is awesome! Thank you!

@rnodern Жыл бұрын

Thanks mate!

@erwocoolis9451 Жыл бұрын

USB connection to computer creates a ground loop that i cannot break with the GTs onboard settings. No screen editor for me i guess :/

@rnodern Жыл бұрын

The phone and tablet versions will work.

@ashwinshankerg Жыл бұрын

thanks for putting this up! this will qualm the vool thirst for a while...

@jimo4106 Жыл бұрын

I picked up a used 2019 MIK SE. They call it charcoal burst, but it's more like deep emerald green with 10-top appearance on the flame veneer. The stock neck pickup is fantastically clear with great note separation...more so than the Duncan Jazz model IMO. And the bridge pickup just roars with a dirty amp. Once I filed the nut slots a little wider and tweaked the trem' springs, this one stays in tune very nicely. Plus a trem' on an LP is a rarity. There is just nothing I would change including tuners. They work fine. This pattern-thin neck plays like a dream and she weighs just north of 8 lbs. The core looks beautiful, but I don't think I could justify the extra cost when this SE is just so good. PRS (and Tremonti) deserve some real credit for taking the LP model into the future. Gibson got stuck in 1959 and never looked forward.

@Daniel-en-youtube Жыл бұрын

Lyrics (in colaboration with @CRG) Feeling alone in a crowded place Feeling alone in a crowded place Feeling alone in a crowded place Feeling alone in a crowded place Feeling alone I have found it hard to get results Now that it's come undone Cause everything was good is gone Feeling alone in a crowded place Feeling alone in a crowded place Forget what you want It's not like we can return Who are you Who are you Where are you going Where are you going How many times you've been on your knees Shattered into tiny pieces of matter How many times you been begging please Drinking this mud, while you don't feel like you're welcome Well alright Well alright If I could have one more day (to face with you) a minute to wash this stain away Are you happy in oblivion If I could have one more day A minute to wash this stain away I wouldn't have it any other way Would you have it any other way Here in the light we are gods Would you have it any other way Here in the light we are gods Would you have it any other way Here in the light we are gods Would you have it any other way Here in the light we are gods Feeling alone in a crowded place Feeling alone in a crowded place Feeling alone in a crowded place Feeling alone Ohhh oh oh oh oh oohhhhh Ohhh oh oh oh oh oohhhhh Ohhh oh oh oh oh oohhhhh Ohhh oh oh oohhhhh If i could have one more day A minute to wash the stain away One more day happy in oblivion Just one more day A minute to wash the stain away Just one more day Wouldn't have it any other way Too many times I've been left to believe There's something to save Well every minute I’ve spent Chasing lies and died ends I thought it would change (but now I know) I wouldn't have it any other way (now I know) I wouldn't have it any other way

@crg1090 Жыл бұрын

“Well every minute I’ve spent chasing lies and dead ends I thought it would change (but now I know)”

@Daniel-en-youtube Жыл бұрын

@@crg1090 thank you!

@bayleyedwards3699 Жыл бұрын

cause everything once good is gone i think

@bayleyedwards3699 Жыл бұрын

@@Daniel-en-youtube ? \

@TheIbanez21601 Жыл бұрын

I think it's "drinking this muddy water, don't feel like you're welcome."

@cybergnetwork588 Жыл бұрын

Awesome video! Here is a very noob question (got my GT today). My setup is also the 4CM. Let say I am using wah (using exp1), chorus and delay. If I want the wah to get in my EVH 5150 50W preamp input and the chorus/delay in the effects loop, how does the patch would look like? I am a little bit confuse on that one. I am able to set a patch and send the chorus/delay to the effects loop, no issues there. The confusion comes from the wah I want to go to the EHV preamp. Thank you in advance.

@rnodern Жыл бұрын

Hey mate, thanks for the comment. Take a look at 10:05 where I put the delay in the effects loop of my amp. Provided you’re using the GT1000 fx loop 1 in your 4CM setup, anything to the left of the green send return block 1 in the signal chain will be before your amp preamp, and anything to the right will be sent to your amp effects loop. Just make sure that green block with the 1 and the up/down arrows is activated :)

@rnodern Жыл бұрын

Also, look at 18:45 onwards, where I move the tremolo before the amp preamp, and into the amp effects loop by moving the FX1 block before the send and return block, and then after the send return block. So, make sure your wah is to the LEFT of send return block.

@cybergnetwork588 Жыл бұрын

@@rnodern Thank you so much for taking time to answer my question! This solved my issue and now I can set my own patches the way I want it!

@cazziebb1707 Жыл бұрын

When using a wireless, where is the receiver placed in the chain?

@rnodern Жыл бұрын

I use a Shure GLXD16 on my board. Not sure if they make this product anymore. I just place it anywhere on the board and run it directly into the input of the GT1000.

@johnpereira9594 Жыл бұрын

Awesome man. Very helpful

@jayeye89 Жыл бұрын

If I wanted to just use the Boss as a post preamp fx processor (in the loop) and not utilise the 4cm, would I just connect my amps loop send and return into one of the send and returns on the boss ?

@rnodern Жыл бұрын

Yep, you could do that. Just use the main input and output on GT1000 and connect into your amp’s fx loop. Disable all preamp & emulation in your patches. The GT1000 has 2 more fx loops, so you can add more pedals to those loops if you wanted. You won’t be able to use any overdrive or pre preamp effects in the GT1000 however, you’ll need to run your guitar through any pedals you want before the preamp, then into the front of the amp.

@tomrogermarkas2882 Жыл бұрын

Hi. Can you make a demo of using GT 1000 and the Mesa as a stereo rig with 4 Cabel Metod? GT-1000 use IR Cab in the unit and Mesa ovn cab?? Drivepedal in front of Mesa and GT-1000 amp with delay, reverb and so on with both amps? 🙂

@MichaelMoore-od4jz Жыл бұрын

Great video thanks just got my gt1000 core and this video helped so much

@MJ-vd8bj Жыл бұрын

I need the studio version so bad, sounds incredible!

@nechtehneoapelian4272 Жыл бұрын

I heard a bit of the studio recorded version of this on a promo for them when they were coming to perform in Dubai ! It's out there just don't know where!!

@ileutur6863 Жыл бұрын

Why aren't they releasing more these? All it takes was such a new and fresh cut, I really hope this leads to an album...

@rnodern Жыл бұрын

You and me both, mate! I remember seeing them say in an interview a while back that they sit on new songs and sculpt them until the band feels that they’re done. Looking at a version of this song performed +12 months ago, it has changed a bit. I guess their process is very slow because they’re all perfectionists.

@429077303 Жыл бұрын

In the Sydney monolith show they said as long as their fans keep supporting them they’re gonna keep writing new music and touring so it sounds like something’s in the works! Good things come to those who wait

@damienlambert3575 Жыл бұрын

Apparently.... During their UK tour it was said they are not making enough money to continue touring...

@wjveryzer7985 Жыл бұрын

@@rnodern Honestly, i get that its art but i think at this point its almost a disservice to them AND the music. This really sounds NO different than the one we heard years ago! So I think that's a bit of an excuse and they just seem to have a hard to releasing music.

@elchacon6304 Жыл бұрын

You have a great voice.

@rnodern Жыл бұрын

😂 thanks, buddy!

@frankhalfar6808 Жыл бұрын

See you in 013 Tilburg soon

@rnodern Жыл бұрын

Enjoy every minute of it! They are exceptionally good playing live!

@RobdeSwart Жыл бұрын

Tonight!!

@rnodern Жыл бұрын

@@RobdeSwarthow was it!? I ALWAYS enjoy seeing Karnivool play. Im amazed at their stage presence and poise. Im so happy that they have this tour to share their gift to other parts of the world 🤘

@motchness 2 жыл бұрын

this was the best show ive seen them play, and one of the best shows ive ever been to.

Ең жақсы KZbin

Пікірлер