Perfect video

Thank you Greg. Very detail and completed instructions, I followed and it work perfectly. Thank.

Is this the same for all doors?

I just wanna say thank you from me and my boys, got a e60 that needed the window regulator replaced and we couldnt find a how to video. All the other videos we watched were absolutely useless. But this was exactly what we needed. Thanks pops we love you.

Thanks for the video. I am trying to replace the latch that holds the passenger side actuator for my passat 2001. I am able to unscrew one of the two tripple square bolts to get to the handle and the actuator but the 2nd bolt threads got worn out and unable to remove it. Could anyone tell me how to drill it out without damaging any further or any other options

You sure do tug hard on wires, Isn’t that just inviting problems down the road?

Not 2007, only the driver side door is this way

lol, "flimsy" door panels. The door panels on my VW Fox were made out of pressboard. Thinner than the garage stuff with the holes you hang tools on.

question for anyone my door was damage to much for a dent removal so I found a door with everything but the interior of the car. If I take my door off swap the interior to the new door I should be good correct there is no videos showing this exactly thats why im asking

tape cloth around the top of the shift shaft to prevent it from scratching the console components..

Very good and versatile specific on details plus everything was crystal clear to see exactly what to mess with and wich screws to remove Thabk you definitely recommend this video if you really don't know what to do only issue not a big deal is that you should've give people the size of bulb wfter going through all that ill recommend replacing it as well but besides that 5 stars with me

Can I replace the glass run rubber without taking the door apart?

This don't work for the 03 passat

Hi man thanks for the video. Do you or anyone also have a video about removing the front bumper of this car? I’m trying to replace my headlights.

The screw behind the handle is 7mm

Thanks for the walkthrough from 8:00-8:20. Shit almost gave me an aneurysm

How do i do it if the dor is off the car 🙂

That was helpful!

It’s same door b6 b7 ? So can I put the b7 door in my b6

man.. mines is glued together and has rivets holding the panel in place.. bouta drill em out geeze this is irritating

Any videos on fixing locks? My 03 Passat door wont open from outside..

Anyone know what type or name of those bulbs ? Thank you !

U nas w Polsce zajebali by cie za tą szybę co pierdolnołes o ziemie jak swoim

Thank you! My window was not going up, thought it was a motor, but it just needed to be plugged back in!

Great. Thank you

Thanks for the great tutorial

What if you can’t move the shifter which is the reason for removing the shifter. Just don’t want any surprises

Great video. Remember the days when it was fairly easy to repair stuff yourself? I bet these companies deliberately design them so they can maximize labour time in the garages and get more money out of you

Is this possible on a mk6 golf front door

Hi , how do I take the window out if i cant lower it down at all ?

Great tutorial, Greg. This saved me time and money.

Thanks for this video! I'm changing the Window aperture seal on the passenger side and this video really helps knowing what's behind the panels

Make sure that vapour barrier is stuck down when reassembling. Otherwise your foot well will flood when it rains. The vapour barriers stops rain entering the car and the buytly forms a water tight seal. Check out forum "BMW footwell flooding" for more info. Replace any broken door panel clips or water will enter car through those holes behind the door card. From someone who had months of trying to locate a rear footwell flood

what size torke bolt thing do i need for the door its self? t-40? t-55?

slenkstį išarditi ir pereiti iki dešinės vairuotojo

Thanks man window was broken gonna do it myself😤

My seat doesn’t let me go back all the way what should I do?

Thank you

I appreciate the idea of the head-cam but it does make for a bit of adizzying video.

3:50 panel removed. 4:00 when did you knock the two plastic pins out of the lock holder? How do you put them back during assembly? The pins should remain there, the lock is removed together with the sheet after disconnecting the handle. Look: kzbin.info/www/bejne/gZC0hZlpgdWibbM 13:35 - 17:20. Then you don't have to stick your hands to the lock and use a hook to tear off the connector.

soo dark , it be nice to do a redu of the vid with atleast little bit more light, I guarantee you will get more views and likes ,it's just wayy to dark to see anything

What a job

I had to watch in VR

Well done. 👍

at 3:58 there should be three rivets there, someone didn't put it back last time,because it hard to put it back, Don't need to remove those rivets before remove the carrier panel, it will hard to put it back, I remove the carrier panel with the door lock all at once, first on rear door that fitted 1/4 window or wagon, you need to remove the short window's rail that fit front of the door lock, then remove the lock bolts and then you can remove the all out a little to easy remove the cable that from the outer handle to the door lock ,then can out at once.some models need to remove outer door handle at once. after out ,then can remove and install the rivets easy., front door is easy because no window's rail there,, Hope this help!

Awesome detailed video. I detail cars 🚗 and I just bought a 2005 Mazda 3. Thus this looked lived in by the homeless. I thought I'd have to replace the carpet . However after taking the seats out I needed your video to DEEP clean under the console. Tks because the one I bought was worse than the one you had In the video. Tks so much.

Your gonna run into problems replacing the door handle. When removing and installing these handles they need to be held in the open position while using the t20 to loosen the carrier screw. Also the door skin bolts have 3 different types. The upper corner bolts are tapered and the underneath bolts have a thinner washer for clearance.

Excellent video on the removal process for door lock actuator and handle. Good video work.

do you see the video ?? you show other than what it's supposed to

you make it look so easy, nice work!