Жыл бұрын
Жыл бұрын
Пікірлер
@mohammedhamza6354 2 күн бұрын
Thank u sar
@level2456 2 күн бұрын
Thanks for the video. My machine is not overlocking thicker fabric, sometimes even the thin one. What may be the problem
@saraaronzon4562 9 күн бұрын
This helped so much as their videos she threaded it incorrectly and I kept breaking the thread. Lifesaver, I was about to return it. It worked beautifully!
@alexanderboardman5127 10 күн бұрын
How tight should the tension disks be? Thanks
@SewFelicia 13 күн бұрын
I found you via Chris Lucas’ channel when she got her machine. I was wondering if there is a Juki or Jack equivalent to it? If so, what are there names?
@ozcommercialsewingmachines 10 күн бұрын
Hi! Are you in Australia? There is a JACK machine that is similar and I'm sure there would be a JUKI machine as well. The main thing is that the JACK is quite a bit more expensive and the JUKI is even more. Can I ask please why you are asking about these two brands which are both made in China as well? We have found that our product is a superior product being that it is twin stepping motor operated instead of single on the JACK and our PS-1933B has a few more features like the 1/2 and 1/4 stitch buttons.
@SewFelicia 10 күн бұрын
@ thanks. I sure am in Aus. I’ve heard of both Jack and Juki, but only heard of this machine via Chris Lucas’ channel when she got hers. I loved the sound of the features on it, but I’ve not heard of it before and it’s red. I prefer blue. Pretty funny reason to look at something less red but with blue I know 😂 I wondered if I could find a machine like that but in blue.
@ozcommercialsewingmachines 9 күн бұрын
No worries, the machine Chris Lucas has is also available in blue but we don't keep the blue in stock. We also have the top of the range machine with all the same features as the PS-1933B but it has a very easy to use touch screen instead of buttons, this is our PS-1933A which only comes in blue :) I have one of these machines about to land.
@SewFelicia 9 күн бұрын
@@ozcommercialsewingmachines oooo. I definitely am interested in that version. I’ll contact you directly as I can’t see that version online.
@ozcommercialsewingmachines 5 күн бұрын
@SewFelicia - No problem, you can email me - [email protected]
@keithbarrett9449 14 күн бұрын
I have the 3rd kind, i tried what you did and when i start going the piece underneath stops it from moving, i qlso get uneven
@RichOtieno-r8g 17 күн бұрын
Hello, how do you fix inappropriate stitch length i.e 8mm dial and the actual stitch on fabric is 6.3mm
@darknessfierce4209 19 күн бұрын
It worked for us thank you
@ozcommercialsewingmachines 13 күн бұрын
You're welcome!
@nauxsi 24 күн бұрын
My wheel moved back but not forward.
@Pixy_Flower 28 күн бұрын
what do you do when it don't wine
@joannestoddart3918 Ай бұрын
Brilliant video. Thank you so much. I can keep referring back to it until I am compitant
@ozcommercialsewingmachines Ай бұрын
Thanks for watching :)
@chlebowg Ай бұрын
Thank you, my Jack 5 knee lift/bar was configured wrong. Couldn't get it to work. Now configured correctly.
@ozcommercialsewingmachines Ай бұрын
Excellent!
@SHAHANEALI-h6g Ай бұрын
Give me cantec
@digitalbar4u Ай бұрын
Thank you for a very informative video
@ozcommercialsewingmachines Ай бұрын
You're welcome
@digitalbar4u Ай бұрын
OMG, thank you so much, this video is exactly what I needed to see
@ozcommercialsewingmachines Ай бұрын
Glad it was helpful!
@digitalbar4u Ай бұрын
Thank you, your video was very informative
@ozcommercialsewingmachines Ай бұрын
Glad you enjoyed it!
@elaczerwiakowska5024 Ай бұрын
Thank you for this film. Partially you cover the view with the lamp😊
@ozcommercialsewingmachines Ай бұрын
My pleasure 😊
@MlandEmbroidery Ай бұрын
I have a new jack a5e e and used about half hour. Knife will randomly not move back to position and break needles. What could be wrong. I have some knowledge of this machin
@ozcommercialsewingmachines Ай бұрын
A possible cause is a bent needle plate. If you have had a needle strike then I'd have a look at this.
@denisedeane8218 2 ай бұрын
How did you change the bobbin tension? You did it off the screen
@marietheresebegue7291 2 ай бұрын
Hi thanks a lot. You are the first showing this kind of vidéo. I've broken the upper looper and I can see that there is 2 holes on it. I've loosen mine. I've bought one but there's only one hole on. Is that good. I got problem to put on the thread. My overlock is 747d siruba. Thanks God Bless.
@ozcommercialsewingmachines Ай бұрын
I'd make sure you have the right part as it should be replaced like for like.
@mendbayartsetsenbayar7002 2 ай бұрын
👍👍 Hi, can i do this on Jack S7?
@ozcommercialsewingmachines Ай бұрын
You might be able to. Did you get a sheet with all the parameters on it?
@MagaliDeBrauwer 2 ай бұрын
Hi thank you for sharing this. I recently bought a TY-1300DD-1 industrial machine and I’m struggling with reading the manual it’s not the easiest! Please could you help me to explain what the motor box exactly does and the tension parts of this machine . i’m in desperate need of help! thank you so much
@ozcommercialsewingmachines Ай бұрын
The motor on this is a. direct drive servo motor which allows you to adjust the speed and needle position. There is a pre-tension which is the little set of tension disks at the top of the thread path then there is the main tension assembly down on the face of the machine. The pre-tension does not need very much tension at all, you do all your setting with the main tension assembly. The main tension assembly adjusts the needle thread tension (the bottom of the fabric). If you have your bobbin thread tensions et correctly and you see thread looping on the bottom then you tighten the top tension but if you see looping on the top you loosen the top tension. Hope this helps.
@MagaliDeBrauwer 2 ай бұрын
Hi thank you for sharing this. I recently bought a TY-1300DD-1 industrial machine and I’m struggling with reading the manual it’s not the easiest! Please could you help me to explain what the motor box exactly does and the tension parts of this machine . i’m in desperate need of help! thank you so much
@rizwanamohamed8727 2 ай бұрын
My screws are striped how do I get it out an I need new screws
@ozcommercialsewingmachines Ай бұрын
If the screw threads are stripped out then you need to replace the needle bar as from memory these are a one piece unit with the needle clamp system.
@fran_ward 2 ай бұрын
lol. I wonder if this is for me for next week when I pick up my new machine!
@tanjaamler4794 2 ай бұрын
Thank you for this video! Could you please tell me, if its possible, to slow down the speed when the machine automatically locks the seam? My Machine locks so quick ... Thank you very much!!
@ozcommercialsewingmachines 2 ай бұрын
Yes, you can slow the speed on the back tacks but I don't have a copy of the parameter list anymore so I don't know what the numbers are sorry. If you got a paper sheet with the parameters on you can find the right numbers and bring them down to a respectable speed.
@tanjaamler4794 2 ай бұрын
@@ozcommercialsewingmachines Thank you very much!! Good to know!
@hamzatouhami6137 2 ай бұрын
What about the area that says put solid grease. What should we put there?
@ozcommercialsewingmachines 2 ай бұрын
You need to get a grease that is suitable for gears on an industrial sewing machine to put in there.
@razikakhichane8219 2 ай бұрын
Thanks 🙏
@ozcommercialsewingmachines 2 ай бұрын
You’re welcome 😊
@valeriekaunda8719 2 ай бұрын
can you do a video on jack E3 5 thread i cant get it to the good tension and stitch length
@ozcommercialsewingmachines 2 ай бұрын
I'm sorry but we no longer sell JACK machines so I can't get one to do the video for you.
@olubukola7 2 ай бұрын
Thanks for the review, I am not new to industrial machines, however, the latest direct drive industrial machines by JACK come with new features the older industrial machine does not have. I have recently got my eyes on the A2 direct drive industrial machine, and this informative video has boosted my confidence to go for it.
@ozcommercialsewingmachines 2 ай бұрын
Great to hear, thanks for watching.
@lakshmidhanashekar2071 2 ай бұрын
Omg thanks a lot for this clip 💓 And the comments section are the most useful ones as well ❤ I have got my first industrial sewing machine A5E-Amh and I was so worried looking at the manual as it's useless 😢 your tutorial and comments helped me to do my first bar tack stitching 😊
@ozcommercialsewingmachines 2 ай бұрын
You can do it!
@razikakhichane8219 3 ай бұрын
Thank you very much for this video
@ozcommercialsewingmachines 2 ай бұрын
Glad it was helpful!
@bartbart6699 3 ай бұрын
Ciao, dove si possono acquistare questi piedini per cerniera?? Abito in Italia e qui non li trovo da nessuna parte.
@ozcommercialsewingmachines 2 ай бұрын
They are readily available feet, you should be able to get them from any good industrial machine supplier in your area.
@bartbart6699 2 ай бұрын
@@ozcommercialsewingmachines Grazie mille! Gentilissimo ☺
@victoriaackumey6996 3 ай бұрын
Thank you❤. It worked
@ozcommercialsewingmachines 2 ай бұрын
You're welcome!
@r.duroucher225 3 ай бұрын
Finally found someone who actually provides accurate easy to understand information. Thank you!
@ozcommercialsewingmachines 2 ай бұрын
Glad it was helpful!
@NN-rk4mn 3 ай бұрын
Why does walking foot leaves mark in leather? Can you change that with seting machine? It will ruin leater if it stich like that.
@ozcommercialsewingmachines 3 ай бұрын
Walking foot will always leave marks because of downward pressure from pressure regulator. You will need to use a flat bottom foot to lessen the impact.
@nazliekariem3664 3 ай бұрын
Thank alot it worked
@ozcommercialsewingmachines 3 ай бұрын
You're welcome!
@MikkoRantalainen 3 ай бұрын
Can you use regular sewing machine oil for every moving part or do you need thicker oil for some parts?
@ozcommercialsewingmachines 3 ай бұрын
Regular sewing machine oil or white machine oil is fine. The jack machines use grease to lubricate the top of the walking foot mechanism, your machine would have come with a syringe of it.
@phildasolomons109 3 ай бұрын
Industrial ovelocker stuck what. Went rong
@phildasolomons109 3 ай бұрын
Industrial ovelocker
@phildasolomons109 3 ай бұрын
I want to know about the ovelocker
@craftycaz 3 ай бұрын
Exactly what I was looking for to change mine (H5). Just a question if that's ok? When pressing heel back on the foot pedal to lift the foot, sometimes not every time my machine will do a super fast and scary back and fore starting stitch. It's very random so any advice very much appreciated. Do you also have a video on the domestic settings you put on your machines at all please? Thank you once again for an invaluable video tutorial.
@ozcommercialsewingmachines 3 ай бұрын
Your machine will do the end tack if you hadn't done it previously as it is programmed to do that. Sorry but we can't give you our settings as we no longer sell the JACK brand and I don't have the parameter list for the machines. They do change them occasionally as well.
@craftycaz 3 ай бұрын
@@ozcommercialsewingmachines Thank you I appreciate your reply
@ChrisLucasDesigns 4 ай бұрын
Looks fantastic 🎉can’t wait to get one for my cylinder arm 😃
@moross6792 4 ай бұрын
Thanks you’re the best
@ozcommercialsewingmachines 4 ай бұрын
No worries, thanks for watching
@caglazey2949 4 ай бұрын
Thank you so much❤
@ozcommercialsewingmachines 4 ай бұрын
You're welcome 😊
@michelleharrison7030 4 ай бұрын
Thank you! I now feelllike an idiot. I spent time under the table having a kid hold a flashlight trying to see if thread was stuck and thinking wasn’t there an easier way to get to the bobbin. Even tilted machine up to make sure the oil was good. Ha! Now I see a much easier way
@ozcommercialsewingmachines 4 ай бұрын
Glad you were able to fix it, thanks for watching.
@TocaRoyy 4 ай бұрын
Thanks for this. I have been looking for this tutorial for a while.
@ozcommercialsewingmachines 4 ай бұрын
Glad I could help!
@mindizza 4 ай бұрын
Wow! This worked like magic. My Jack A4E Q just picked up in seconds of watching this video ❤❤❤❤
@ozcommercialsewingmachines 4 ай бұрын
Glad it helped!
@The3leo3 4 ай бұрын
Hi! Great help! I have an H2 as well and I was wondering how you are stitching without the bottom thread?
@ozcommercialsewingmachines 4 ай бұрын
If a lockstitch machine is creating a stitch then it has a bobbin in place. If there is no bobbin then no stitch.
@VeronicaSlz 4 ай бұрын
When I got my bob in , they showed me a way of wrapping it around one direction and then another first. Will this work just as well? Looks much simpler. Thanks!!
@ozcommercialsewingmachines 4 ай бұрын
This way works a treat. There are a few ways to wind a bobbin but we like this way :)