What tackle did you use for the sturgeon bc it keeps saying to me the fish was too strong upgrade your tackle
@Jase777jaseАй бұрын
Hi there… The tackle setup is shown at 3:00 in the video. I have just tested it at 6th July 2024 and it still works fine. Unfortunately the powers that be (the developers) have made a change to the game. They have made it so that fish cannot tow the boat as much as before, However, the fish can still tow the boat, so this method is still valid. Thanks for your comment.
@howardatherton3889Ай бұрын
Thanks very much for posting
@Silverado582 ай бұрын
It’s easier to just put your ear or a microphone up to them while your cars in reverse (with the P-brake on) if their are working you will hear a clicking noise
@aadoty11 күн бұрын
And if no click then the next step is to use this method to verify, as it could be the system not providing electrical contact to the sensors and the sensors work just fine.
@mike-ij9lv2 ай бұрын
Lol the Zeus can catch 80 pound fish walleye are a light fish
@VinkoLorencic2 ай бұрын
A wonderfully informative video. Well done, you are a great explainer
@Jase777jase2 ай бұрын
Thanks for stopping by and I’m really glad you found the video useful. 😊
@la3obgamer-7012 ай бұрын
Legend ❤
@jorgee.villamaring.81242 ай бұрын
Hello @Jase777jase Your video is probably the most complete and detailed one I have seen here; thanks for a great job and for sharing your knowledge. I have been having issues powering my reverse camera, as I can't identify where to connect the red wire (12V Input) on my harness. Long story short, I have a 24pin harness that connects to the back of the unit; a black box is connected to the 24pin connector by 2 cables (green and black). From that black box comes a red wire (12V Input), I guess this is the one I should use to power my camera. My question is, where does this red cable go to? I haven't been able to locate the reverse wire from the Canbus/existing loom in the car... I have plenty of pictures to show you what I'm talking about, should you have the time (and patience) to walk me through the rest of the process... My email is [email protected]. Thanks in advance!
@user-tr7fx8ty5s2 ай бұрын
Hi what is the last lead in video called , it’s 4pin aviation on one end and a small 4 pin push fit thanks in advance
@grandsonriley3 ай бұрын
Hi, in the last drawing using the relay, it appears you have the c2 box going to the centre terminal on the relay, is this correct or should it be top left? 33:43
@Jase777jase3 ай бұрын
Well spotted… actually, it’s just the way I drew it, I simply meant it goes in to the relay, but yes you’re right, the way I’ve drawn it looks like it aligns with the centre pin, whereas of course it should align with the left hand pin, as per the previous drawing. So for wiring of the relay only take note of the previous drawing. Thanks for spotting this and good luck! J.
@RenYi_Abarai3 ай бұрын
i have a headunit for BMW e46 android, and i've noticed during summer despite car having cooling inside, sometimes headunit likes to freeze for a bit, and the latest what happend when it was very pre-stormy time alot of hot humid air, it started freezing screen little bit flickering with white lines takin up 3/5 of the screen from bottom, and it freezes it stops any actions music etc, so i want to know is it due heat or head unit problem ?
@lahibs3 ай бұрын
I’ve got same issue with a tiny different Technicolor router and tried this on mine it didn’t work. 😢
@maadderredd3 ай бұрын
This is the best video for camera connections on the internet, thank you!
@GaryInAmsterdam3 ай бұрын
I gave a "thumbs up" but was still hoping for a real-life instructional video, meaning, I am still a bit confused how this applies to my car. But I did learn a few things.
@brendonrutherford51183 ай бұрын
Massive overheating problems with Chinese Audio head units!! (yeah right) Without any exaggeration whatsoever I can honestly say that I have purchased three middle of the road prices (that's right 3) Chinese head units since December last year (2023) supposedly for a Xmas present for myself & all 3 of them have given nothing but overheating problems. In actual fact, the best method to rectify this problem that so many people appear to be having is quite easy!! All you do is open the top of your rubbish bin & simply throw your Chinese head units into it & clamp the lid down tightly & the problem is fixed!! Sorry about the sheer wasted money associated with purchasing this Asian audio rubbish but I returned to purchasing off Amazon (USA) as against using Ali-Ex, Temu etc & using a known brand name & guess what?? "Voila" (French) my problems disappearded with immediate effect!! I duly instigated all the heat removal effects I could (I'm a certified computer tech) & my latest heap of junk looks more like the insides of a computer with 3 cooling fans of various sizes as well as heat sinks, heat trasnsfer pads & paste etc, etc & this still didn't rectify the problem. It helped but didn't fix it!! These pathetic Chinese units may well have all the bells & whilstles but not everything works & therefore as described above they are in effect mere & utter junk rubbish!! Don' waste your time & especially your money on this Asian shit & instead buy & pay the extra for a name branded unit. Yeah it'll cost a bit more for sure but you'll appreciate that factor from the moment you install the unit & unlike myself, you won't be installing & removing head units all the bloody time!! I reckon I can remove my unit blind folded now & do it within about 3 minutes but that factor is nothing to be proud of for sure!! Final word, leave those Chinese head units on the shelf where they are best left for mere viewing purposes only!! Seriously you have indeed been duly warned!!
@xraybeaver44 ай бұрын
I just wanna say a massive thank you for this video…….ive been stumped with this issue for week and your explanation not only has solve my issue but made it really easy to follow and understand. You’re my hero 😏👍🏼
@Jase777jase4 ай бұрын
Many thanks for taking the time to stop by and say thanks, it means a lot. That video took several days of prep and 3 separate attempts at recording the voiceover, so getting positive comments makes it all feel worthwhile. I’m very pleased it was helpful to you. Good luck with your install! J.
@yarasrinivas38084 ай бұрын
Hi bro 6 pin how to check bro
@user-ko7sj2fk5w4 ай бұрын
👍
@Di.Tar_J.4 ай бұрын
Дякую, брате!
@Jase777jase4 ай бұрын
You are very welcome! 👍
@user-vp6gh5oc6s4 ай бұрын
Brilliant video. Best so far. All options cover. Will try on my 2004 slk
@Jase777jase4 ай бұрын
Thanks very much for your kind words and I’m glad you found it useful.
@jamesv5745 ай бұрын
Only just found this, thanks for the detailed explanations of all the options. When using the relay from C2, can the C2 reliably handle the inductive load of the relay coil with no additional protection against back EMF?
@Jase777jase5 ай бұрын
Thanks James for your comment. You’re the second person to raise this issue. I have pinned the previous comment, so you should see it at the top of the comments now. A flyback diode could be used, although all I can say is I have not had any problems in several years of having this set-up. Thanks again. J.
@basshigh865 ай бұрын
What size is the heat sink
@whatitisnt.5 ай бұрын
Recommended this or PC fan 12v 80mm installed on the unit?
@jorgemora71905 ай бұрын
Excelente v8dio l never see you are really teacher on the read wire all the tails thanks lot
@bugsRdrugs5 ай бұрын
Great video! How would you suggest wiring an existing camera to an auxbeam switch panel? It currently turns on in reverse gear and manually with a button on my headunit, but I’d like to use my auxbeam switch to bypass the headunit button. Thank you!
@elpedro79105 ай бұрын
Might be the most advanced TV Philo Farnsworth ever seen.
@Jase777jase5 ай бұрын
Yes, indeed it might. He would have been amazed at it, and then just think what he would make of televisions of today. 🤔
@user-kf2hc7id7z5 ай бұрын
So I don't have to hook up a ground
@pontusborgjonsson12466 ай бұрын
From the batteri just take power from the stereo
@niknak07896 ай бұрын
Great video thank you! Would love to see a video on the connect2 universal patch lead for steering wheel control, I am having problems! 🤨
@YazanMusharbash-rp5gu6 ай бұрын
What is the model of this head unit please
@rachelfrossard6 ай бұрын
Hi. Can I connect the trigger and the 12v back camera from the head unit together, and then connect to the red wire from the long cable reverse camera? Ive been struggling to find a way to connect both
@shakeel_a49346 ай бұрын
Ah my headunit just stopped working 💔. It was perfect. Had carplay and the audio was amazing. Had a reverse camera and now it just stopped working. I spoke to someone and they said its most likely to have overheated. If its overheated, is there anyway to fix it?
@brendonrutherford51183 ай бұрын
Yeah there is a simple method to fix this problem!! Respectfully throw it away & buy a proper unit!! It's an overheating problem alright & caused by piss-poor design & a lack of proper bench testing in the lab & most Asian head units & especially the cheaper ones really are prone to this problem!! Adding heat sinks & cooling fans won't always rectify the problem & who knows that better than me!! (yeah right) You should not need to add heat sinks, cooling fans etc after having just purchased a new head unit as they should be built-into the system in the first place!! Sorry this is a first class indication of typical rubbish Asian shit!! Simply put, if you don't want overheating problems don't buy this Asian crap & I've honestly got 3 of these units (brand new) & they are all shit. Respectfully you have been warned!! My car has had no radio unit in it since before Xmas (2023) & I'm still trying to work something out but I do have three (3) head units that are sheer & utter rubbish honestly & all with the same overheating problem!! Good luck with your current unit!!
@sameoldday47736 ай бұрын
فنان
@toyks2nd6 ай бұрын
Did the heatsink outside the unit alone fix the overheating issue, or did you have to install something else or additional heatsinks?
@Jase777jase6 ай бұрын
Hi there, yes, just the external heatsink did the job. I didn’t need to do anything more. If the back of the stereo is very warm/hot, and if you mount a heatsink in this way, and then if the heatsink itself is warm or very warm during use, you can be pretty sure it will fix any heat related issues. I hope this helps and thanks for your comment. J.
@toyks2nd6 ай бұрын
@@Jase777jase thank you!
@secretariat17037 ай бұрын
Do you know where to find a plastic bag in Lone Star for the underwater trash mission?
@youknownothing37667 ай бұрын
What do you do with the ground for the power lead if you hook it up to the reverse light? Do you split the postive into the positive and the ground lead into the negative of the blub?
@Jase777jase7 ай бұрын
Hi there and thanks for your comment. The beauty of that cable is that it has a ground at both ends, so as long as your RCA video cable is plugged in to the head unit, it’s already grounded, so there’s no need to ground at the other end where you connect to the reversing light. hope that helps. J.
@youknownothing37667 ай бұрын
@@Jase777jase thanks for the reponse. That makes sense. Much appreciated.
@marcelodineck7 ай бұрын
I have the cable with the yellow male like that and the power. I was trying to get through the rubber in my car and I damaged the end of the cable. I decided to cut and run the wire because it was thinner; now, I bought a new P2 power cable. Can I just cut it too and splice it to my old one? I saw that there are 3 wires. Or do you suggest to repair with a new plug?
@ChrisWhite.fishing7 ай бұрын
where do i get the catapult
@Dionline-nl8 ай бұрын
Fantastic video! This helped me soooo much! Thank you so much!
@collinschubert69408 ай бұрын
You are a fantastic teacher my friend. Thank you so much for this video, the best illustrations I have ever seen on youtube, hands down. Cheers and many thanks from the USA!
@Jase777jase8 ай бұрын
Hi there and many thanks for your kind words. I’m very glad you enjoyed it and found it useful. Happy New Year! J.
@marksmith86636 ай бұрын
I installed a few different combinations . Found better to if possible avoid using rear revers light for power . As often seem to cause interference on the camera then have to use smoother capacitor .
@Jase777jase6 ай бұрын
@@marksmith8663 Hi Mark, great advice, thanks for the comment. Nothing beats experience!
@miku23t8 ай бұрын
Thanks for this 🙏 , great brilliant education here .
@tonyfielding5088 ай бұрын
my meter is far from accurate do you know how to calibrate it cant fine the calibration pot
@stevepiggott4528 ай бұрын
Great video. Thanks for taking the time to make it. Question. I want to fit a reversing camera (5 inch folding monitor) and reversing sensors. New vehicle. If I take live connection from reversing light is it best to take this feed through a relay, don’t want to blow fuse. Also. Modern cars have systems that detect bulb failure. I don’t know if this includes reversing light bulb. If so. Would taking supplies from the reversing light affect this.
@igors-bh9vc8 ай бұрын
Hello mate thanks for your video mate, do you know by the way if the backlash is worth to collect and keep as its classified as loot not a trash.. ?
@markotoy8 ай бұрын
it's all trash so once you get it, you can throw it away
@jeremyshereood64409 ай бұрын
Why dose it need to be powered twice?
@milesbbop95639 ай бұрын
Why is there always an extra cable. I don't understand why it's necessary. Should it come with the camera? Mine has Red and White wire with a brown video cable. Don't I just hook them up accordingly?
@LuisPauli9 ай бұрын
amazing tutorial .. visually descriptive and with easy to follow instructions.
@PhillipParr10 ай бұрын
I didn't even think about needing to use a relay for this! I've checked the specs of this particular relay and see that energising the coil at 12V takes 30mA of power. I have a camera with no special lights on it, and its consumption is listed as 45mA so I guess the question is how many mA is too many? Perhaps it's best to use a transistor to supply the power instead?
@Jase777jase10 ай бұрын
Hi there Phillip and thanks for your comment. That’s very interesting. I didn’t, off hand, know the energising current of that relay, and I don’t know the current draw of my camera, but the lights are pretty bright. They provide more light than the actual reversing light of the car, but that is pretty woeful, so that’s not saying much. So I would imagine the draw of my camera is a fair but higher. As you say, how much is too much. All I can say is that I believe anecdotal/real-world experience counts for a lot, and I’ve never had a problem since fitting the relay. Also, I believe there is a company selling this as a solution, ie. a relay with wiring loom etc, so others have thought of this way of doing it. That being said, I think their product is also there to stop interference. Yes, a transistor might be a better way to go. If you do decide to go down that route, I’d be interested to see a schematic. 😀 Many thanks for an interesting comment. J.
@PhillipParr9 ай бұрын
@@Jase777jase I decided to do what the manual for my head unit said to do which was to connect the power for the camera through the ACC line on the head unit itself. I presume this is because without this, that particular head unit wouldn't be able to show the camera unless the car was also in reverse.