HP 107W Mono Laser Printer - Unboxing - setup and review

Brief Unboxing, setup and review of HP 107W.
Quite difficult to source at the time of writing but here are a couple of links:
Please like and subscribe
www.argos.co.uk/product/78331...
www.ebay.co.uk/itm/HP-Laser-1...

[@stevev3664]

I used to be a photocopier engineer about 35 years ago. It’s amazing how far they have advanced. Here is a tip: paper has grain. The grain will run either landscape or portrait. It will feed into the printer much easier when fed with the grain, not against it. This will minimise misfeeds and paper jams. If your printer feeds the paper in portrait orientation as this machine does, buy paper with the grain in that direction. Same thing applies if your printer feeds the paper in landscape orientation. You can tell what direction the grain runs by folding and creasing a sheet of the paper. It will crease smooth and sharp with the grain and rough and crinkly against it. Thanks for this video. It was very helpful.

[@Jase777jase]

Thanks for your comments Steve, that’s very interesting, I didn’t know anything about that at all. Maybe you should make a video about it! Thanks again for your comments . J.

[@stevev3664]

@@Jase777jase I don’t make videos. Feel free to make one about it if you wish. 😊

[@matthew13579]

How can you determine the grain?

[@indikaprasanna3702]

@@matthew13579 kzbin.info/www/bejne/mYDCeXSbfZyjfdksi=nQj0HXfnsADYjiLZ

[@BoyzInTheHoo]

I just bought this printer. KZbin brought me right here and now I'm printing like a Printing factory!! Yippie. Thanks dude. Great clear video!!

[@Jase777jase]

Glad to be of help! 👍👍👍

[@michaelsidorchuk474]

Thanks a lot, it helped me to setup my printer quick and easy. Best of luck to you!

[@laramargaret3374]

The ink tank system appears to be much better than the cartridge system kzbin.infoUgkxciSwynMJ7PnUvvx11rewiu-yFBkZTl53 and a lot cheaper to run. The machine was easy to set up. A small point but I thought they'd be a USB cable included to help with the set up but there was none. I've been using it now for a few weeks and it seems like a good product and superior to my previous printers which were all troublesome HP machines.

[@erasmovargas4656]

That was amazing. I spent 3 hours trying to settle it by myself. Highly recommended video.

[@Jase777jase]

Thanks Erasmo, much appreciated feedback 👍

[@fuckmerossi]

Thank you for taking the time to do this

[@Jase777jase]

Thanks for the thanks! Hope it was helpful.

[@fuckmerossi]

@@Jase777jase it was! The instructions didn’t seem to cover any of that. I followed along & had my laptop iPad & iPhone linked in 10min 👌

[@Jase777jase]

Oliver Ross excellent stuff, thanks for the feedback!

[@NightKingBirch]

Very good, thank you for this.

[@JuanCarlos-wu6ou]

Soothe and calming voice

[@lucilfer_12]

Thanks, helped a lot!

[@muneshbbc]

Nice ,very helpful

[@shygod1494]

Cheers for this mate, hate reading manuals sometimes.

[@Jase777jase]

I hate reading manuals, always! Manuals should be the last resort! 🤣

[@ronaldopena447]

Thank you, very useful video to set up this baby, let see how it works

[@rezaraj336]

God bless you Really useful video 👍🏻🙏🏻

[@diptattooinn6716]

VERY HELPFUL VIDEO

[@Jase777jase]

Thanks for your support 👍

[@rectory18]

Very helpful thank you.

[@keyboardguider7648]

That helped a lot

[@drejpolin]

Hi, for how long does the catrdige last after refilling. Because, when bought toners are only half filled right? So they run out fast.

[@indikaprasanna3702]

Thanks a lot, Highly recommended video. Thanks, dude. It is a great, clear video!!.very useful video to set up my HP107a printer.

[@Jase777jase]

Thank you very much, glad it was useful to you. J.

[@indikaprasanna3702]

@@Jase777jase Most welcom dear.I'm from Sri Lanka.

[@ahmadiyad4348]

I have a hidden wifi how can I connect to it? it won't show with the available networks while setting up the printer

[@1391Ghost]

huge help thank you

[@Jase777jase]

Thanks for your comment and very glad it was useful. 😊

[@arber474]

Can this printer print in both sides of the paper?

[@gayatriaditya6205]

Hi, Would you be kind enough to stick the URL for downloading the program for MacBook Air? Also what operating system to choose? Thank you, G

[@Jase777jase]

Hi there, I think it looks as though there are no drivers available for Mac. I think this is probably because printing on newer macs uses AirPrint, like iPads. Therefore I would probably try to set it up from an iPad if available, then find the printer on the Mac, via AirPrint. Hope this helps, thanks for your comment. J.

[@MuhammadUsman-lp4sm]

After a little while, the power light starts blinking and printer goes into sleep mode. If I wish it to turn if off then by pressing the power button for a few seconds, it does not turn off but instead wakes up with the waring red light blinking as well. Then I have to press the power button again to turn if off. Is this a normal behavior? Could you please upload a video of shutting off the printer?

[@Jase777jase]

Hi there, I’m extremely busy at the moment, but will look into this when I can. I do know what you’re talking about though, I think it’s intended to be in “standby” mode all the time.

[@suratvadeewongwaodee534]

how to turn of this after used?

[@allfootballnaija]

What about unboxing and setting up a hp laser 107a. Mine is refusing to connect. Please, what can i do to connect it with my PC?

[@SQ8MXT]

if you connected it to a front port/usb hub try connecting it to the back panel usb. Mine was not detected during driver installation when i connected it to a usb hub

[@nepaliman5716]

Hi, can you refill the toner yourself (like brother printer ) or you must buy official toner ?

[@vasilachealex]

You can buy an aftermarket toner and take the chip from the original(demo) toner for it to work

[@microsoftsarker]

good

[@user-zs6gl9zs7s]

What kind of paper can I use and do you print the sticker

[@Jase777jase]

Hi there and thanks very much for your question. I would say with regard to paper, the standard inkjet or laser paper will be fine, don’t go spending a fortune on expensive stuff. I usually buy the paper you can buy in supermarkets. With regards to stickers, or label paper, I have not yet tried it out, but I would imagine it would be okay. However, as I say I have not tried it yet. Hope that helps Best wishes Jason

[@Ziederzee1]

I thought it was me, checking every volume setting on my laptop, youtube, listing, etc had to change to another poster, couldn't understand a word. Might be a good tutorial, but do another voice over with decent volume.

[@Bakugoukatsuki860]

why is the sound so low

[@FirebrandVOCALS]

(Here's the how long is a piece of string question :-) - Roughly How long would a toner cartridge last on average? Cheers good video

[@Jase777jase]

Well I would say roughly as long as a piece of string. 😀... but, official HP data is 1000 sheets worth. Cartridges range from £25 to £40ish, so not bad. I have 3 other printers, all inkjet and I can replace all the inks for a lot less, but the big thing is that this will always print when you go to it, even if you leave it a month or more without printing. On the inkjet, I might spend an hour (and a lot of ink) cleaning the heads to get the thing going again each time. This printer has a very good web interface (viewable in a browser) that shows all the stats and ink remaining, so I should be able to give you a real world answer in a few months! Thanks for your comment, J.

[@FirebrandVOCALS]

@@Jase777jase Thank you so much for your very informative reply... it’s greatly appreciated 😎👍 Cheers 🍻

[@Jase777jase]

Firebrand VOCALS you’re welcome!

[@fruzsinafarkas4076]

​@@Jase777jase Hi there, how do you like it so far? Is there a full cartridge coming with these or they are rather a "demo"? Thanks for the vid.

[@Jase777jase]

@@fruzsinafarkas4076 Hi Fruzsina, many thanks for your comment. I'm not 100% sure but I would not be surprised if its a "low yield" toner cartridge. The problem is that I have now not used the printer for a couple of months. As I said in the video, I wanted be able to move the printer for part of the year, and that's because its an apartment which I rent out for summer holiday lets and so the printer is now in storage. it will be back in place next month and I will give an update then. I have used it for some months though and have been very happy with it. I may actually make a follow up video as this video has proved quite popular. J.

[@salsalsydneys.2943]

My wifi has changed and now my printer is not detected on the network. Can you help how to reset the WiFi?

[@Jase777jase]

I will have the same issue this week myself, so I will work it out and let you know. 😊

[@Jase777jase]

Okay, I now have a solution for this. During the summer break I changed the Wi-Fi on my router, and have now had to re-set up the printer on what is affectively a new Wi-Fi with a different password. The simple answer is just follow the video right through, as if you have never set the printer up before, and everything will work fine. Of course when you get to the installing software, you can choose to cancel at that point because you already have it installed, but the early sections involving setting up the Wi-Fi will still work perfectly. Hope this helps!

[@SQ8MXT]

u can also probably also connect it to your router usb port and print over the network. at least thats what i did with a different hp printer that only had usb.

[@Saranpv]

It’s work windows 7?

[@SQ8MXT]

yep. got a 107a version(same thing without wifi) worked on win7 no problem over usb

[@daddysyoutube2734]

bloody heck your volume is so low

[@Ziederzee1]

I thought it was me, checking every volume setting on my laptop, youtube, listing, etc had to change to another poster, couldn't understand a word. Might be a good tutorial, but do another voice over with decent volume.