DTF Superstore

Пікірлер

@KathetoTeam 3 күн бұрын

hey, what about a full print? im looking to run some custom bjj gis', and looking on how i would do that. Imagine something like a floarl pattern on all the outer part of the gi. How would that work? I dont think DTF would be enough because of the size of the stamp and the edges and everything. what do you think?

@DTFSuperstore 2 күн бұрын

It's possible, we've pressed many things larger than the heat press, you just move it around to make sure all areas have been press. It's not easy but it will work.

@raygangibbs3762 5 күн бұрын

For a 24 inch that’s a pretty good price

@DTFSuperstore 3 күн бұрын

Agreed.

@jankurdiovsky 7 күн бұрын

thx sooo much

@DTFSuperstore 2 күн бұрын

You're welcome!

@pixelbat 7 күн бұрын

Sorry, this isn't friendly to my budget :(

@DTFSuperstore 7 күн бұрын

We totally get that.

@DTFSuperstore 7 күн бұрын

we also have a print to own program that can make it VERY economical!! Check it out! dtfsuperstore.com/pages/print-to-own

@pixelbat 7 күн бұрын

@@DTFSuperstore Can I print out the money to buy it? jk :P I have 2 converted Epson 8550's. It's good enough for me, for now.

@DTFSuperstore 3 күн бұрын

We're not saying you should but... 😂

@customcraft4751 7 күн бұрын

Thanks Jeremy! Helped us a lot

@kyleikenny521 8 күн бұрын

My powder recommends curing at 340 for 5 min. We use a heat press hovered over the film. What could be causing the powder to cure unevenly? Some spots look perfect, othera crack and others look sandy.

@DTFSuperstore 7 күн бұрын

Heat press hovering over the film is definitely not the best way to cure your transfers. That being said, you'll need to move the transfer around under your heat press as it's not really designed for radiant heating but direct contact so it will have hot and cold spots. I would turn your transfer halfway through the curing time.

@samueleisenberg8746 9 күн бұрын

Thanks

@DTFSuperstore 9 күн бұрын

You're welcome!

@ubz376 10 күн бұрын

where is the queue tabl, where you could selt the colour adsjustment for all future filles

@DTFSuperstore 7 күн бұрын

If you want to make changed for all future files it's probably best to either edit the printmode or create a new one. Go to Devices at the top then Manage Printmodes then either double click on the printmode to edit it or right click and copy it to make a new one. Rename it and double click on it to make your edits.

@SimplesbyAKF 11 күн бұрын

Love from Lahore. Pakistan.

@DTFSuperstore 7 күн бұрын

Thanks for watching.

@PreacherJK 12 күн бұрын

Wow...that was too much of everything I need to know about creating an ICC for my new dtf

@DTFSuperstore 7 күн бұрын

Some days my brain gets completely melted working on this stuff...

@Filiku 12 күн бұрын

im subscribing cuz you said futz and trash and i can understand those terms lol thanks for sharing!

@DTFSuperstore 7 күн бұрын

I'll do anything for a SUB :) HAHAHAHAHA

@Filiku 12 күн бұрын

what about for white background is it the opposite? Thanks for sharing!

@DTFSuperstore 7 күн бұрын

after you greyscale invert the image and then do everything else the same.

@raygangibbs3762 13 күн бұрын

It would be cool to see some shop tours and interviews with shops that you have sold your equipment to. This would show how dtf shops can grow and highlight a lot

@EquestrianLifestyle-o1m 14 күн бұрын

Is the process the same for a light shirt?

@BeastieFloyd 14 күн бұрын

❤

@sueb4641 14 күн бұрын

I am trying to learn halftones and trying to follow your video step by step. When you add a mask is it a vector mask or a raster mask

@EquestrianLifestyle-o1m 14 күн бұрын

I tried several times and cant get your method to work. The mask doesnt make a grey scale.

@PAINGEEKSTORE 15 күн бұрын

passou um ano e continuo sempre voltando pra esse video, meu TDAH me atrapalha, mas esse video me salva hahaha

@DTFSuperstore 7 күн бұрын

Estou feliz que você possa encontrar o caminho de volta! HAHA Quando aprendi os meios-tons, tive que assistir a um vídeo várias vezes para lembrar os passos.

@LS1PWER 16 күн бұрын

Simply amazing tutorial!

@tonyallen5480 19 күн бұрын

Thanks for this, does the same process apply when doing if for UV DTF and you just select UV over DTF when the option presents itself?

@DTFSuperstore 7 күн бұрын

not sure as I've not worked with UVDTF and building an ICC

@cjnola5047 21 күн бұрын

ppl weird when they want to stretch test a shirt. I'm like who in the world stretching a shirt like that when they wearing it. 🤣

@DTFSuperstore 20 күн бұрын

I agree...they way people stretch test is ridiculous. The standard that we use is holding the garment 12 in apart and stretching 1 in.

@DJV0ICE 21 күн бұрын

great tut, i was wondering is this just for glow or halftone period?

@DTFSuperstore 20 күн бұрын

This is specifically how to address glows for DTF

@philippb.5675 21 күн бұрын

Does it work with affinity Designer? 👀

@DTFSuperstore 20 күн бұрын

yes

@renardfouindia4183 21 күн бұрын

Hey bro We use Corel draw x24. Can you share some videos regarding same process that works good with DTF.

@LS1PWER 21 күн бұрын

Awesome man loving all your tutorials! Will visit you guys soon in Gilbert to buy some beginner accessories.

@DTFSuperstore 20 күн бұрын

Sweet!

@photus03 23 күн бұрын

Would it not be easier to select all pixels, contract by 3 pixels and then copy to new layer? Ctr+j ?

@DTFSuperstore 20 күн бұрын

It would work...but easier? I've had some industry folks annoyed with me for sharing this method because it's super easy and a hack most of them use. :)

@matthewbergmann7231 26 күн бұрын

What if its a raster image?

@DTFSuperstore 20 күн бұрын

I could have sworn we've covered that on a video....can't find one so I guess we need to make that. ....loading ;)

@kimberlygranger5205 26 күн бұрын

Very helpful

@DTFSuperstore 24 күн бұрын

Glad it was helpful!

@SOORAJDEV-e8h 28 күн бұрын

sir why my white ink slightly cracks at different places during pinting???hen i was using col peel it was ok but hot peel just every design has white ink cracks????

@DTFSuperstore 7 күн бұрын

your hot peel film's ink absorbing layer is getting over saturated. When you change film you have to check your ink levels to optimize them for that new film.

@SOORAJDEV-e8h 3 күн бұрын

@@DTFSuperstore so sir can u tell me how much ink level must i maintain to prevent oversaturation..suggest in percentage...

@luiedguerra4227 Ай бұрын

Amazing videos...How can I get my BY20 to print a min. of half an inch from the left to the right, so as to capitolize on the max. print area?...My print starts about 2 inches from the edge

@patopatagon Ай бұрын

from chile

@renardfouindia4183 Ай бұрын

Hi Bro Need to know same process in Corel Draw for light colour garments

@Beyondinstrumentals Ай бұрын

Super helpful video. Could you make one for white t shirts using photopea?

@renardfouindia4183 Ай бұрын

Hi can this be done in Corel draw also

@DTFSuperstore Ай бұрын

It sure can!

@renardfouindia4183 Ай бұрын

@@DTFSuperstore can you please share hiw

@randelharry7372 Ай бұрын

why are my halftone circles so big? where did i go wrong /

@DTFSuperstore Ай бұрын

Check your images resolution, it should be 300 dpi and check your frequency, it should be between 30-40

@randelharry7372 Ай бұрын

Thanks alot I got it

@mydtfprints25 Ай бұрын

Had an HD 300 dpi design to be printed on dtf using mimaki and it turned out grainy. What could be causing this?

@DTFSuperstore Ай бұрын

sometimes graininess is from bad alignment, but it can also be caused by the CMYK Printer trying to print a color out of it's color gamut, sometimes is just the nature of digital printing.

@letsjazzitup Ай бұрын

Which dtf printer are you using? Didnt see a direct link for that one in the info box for the big one

@DTFSuperstore Ай бұрын

I believe we used the Mimaki TxF300 but this can be done with any of our DTF printers! dtfsuperstore.com/collections/dtf-printers

@DwayneCloud-x2w Ай бұрын

@DTFSuperstore Ай бұрын

Hello!

@godzilla927 Ай бұрын

I think so is wrong with my Difference option.i tried to use the green shirt example. When I apply Difference it changes to yellows and other colors then after the halftone steps. It only knocks out only the black and not the green. It's in rgb mode

@DTFSuperstore Ай бұрын

The green layer you add above the image and then use the difference blendmode must be the same color as the green you are trying to get rid of. If the green doesnt turn black you've done something wrong with the blend mode. then make sure you merge the two layers together before following the halftone steps

@jamiesawyer5102 Ай бұрын

Where can we look at the specs and where can we get a coyote. Is it better than roadrunner?

@DTFSuperstore Ай бұрын

dtfsuperstore.com/products/coyote-24-6-head-dtf-printer-only Better? it depends on your needs. It's faster, print quality will be very similar but it is more complex as there are 6 heads to keep aligned instead of 4.

@elt5509 Ай бұрын

you are god

@DTFSuperstore Ай бұрын

ah shucks!! Glad it helped

@MarioVelasquez-w1e Ай бұрын

is it normal, after having created the color knockout and halftone, for the print to have transparent material of the film in the holes of the halftone pattern? I wonder if its caused by the heat melting over those areas from the press...?

@DTFSuperstore Ай бұрын

that could be some adhesive powder sticking in the holes. You could also try a lower frequency number for larger holes

@mariareardon4779 Ай бұрын

I could not find the video on the what to do and optimize a new film when trying it out.

@DTFSuperstore Ай бұрын

We had that just about ready to go and had an issue with it...It'll be up soon. I'll link it here. Sorry

@brendanpederson5793 Ай бұрын

When I open new layer mask it doesn't go grey and black. And I adding vector mask?

@patrii9100 Ай бұрын

Hello! gret video! what's the time setting?

@DTFSuperstore Ай бұрын

Time should be based on the material used in the jersey. Check out our pressing cheat sheet! dtfsuperstore.com/products/pressing-cheat-sheet

@tokhenz Ай бұрын

Very informative, thank you for all those tests.

@DTFSuperstore Ай бұрын

My pleasure! I'm glad you found it helpful.

@devobrand Ай бұрын

bitmap dosent work.

@DTFSuperstore Ай бұрын

you have to be in greyscale first. Also make sure youre not in 16-bit but 8-bit

@soly8354 Ай бұрын

Thank you so much man, I just printed a hoodie and it was a mess, all the edges that were semi-transparent in the mockup were printed as white pixels and it looked ugly, now I know how to correct that!

@DTFSuperstore Ай бұрын

So glad it helped you get a better result!!

@MariaReardon-of1dy Ай бұрын

Does this work with the Mimaki DTF inks well?

@DTFSuperstore Ай бұрын

It does!!

@tilowilkins6204 Ай бұрын

Does it come in sheets?

@DTFSuperstore Ай бұрын

Not right now, 24” rolls in stock, 32” are on their way

Ең жақсы KZbin

Пікірлер