Wet bed is for paint/ metallic to lay onto while u blending so u don’t have sand piling on the panels or little beads that would look like trash.

28 to 29 psi with 3 turns out from in

@@treysterthepainterturner8404 I've been hearing so many different settings, I'm just starting out so I guess I need to find out what works best for me.

@Mcfly0856 correct. Do what best works for u. Everyone has the own way of painting.

Iwata

Maybe so.

22 psi at the digital gauge which is 29 psi

So the purple cap still uses the same nozzles so u can just get the cap now the one on mines is a 1.4 and not 1.3

I preciate it brother. 💪🏾💪🏾💪🏾

I saw one of your videos, you applied 2 times layer of glasurit lacquer. Is it possible to apply 3x layer?​@treysterthepainterturner8404

Yeap

Idk 🤷🏾‍♂️

Yeah we are maaco

With the 3M gun yes.

@@treysterthepainterturner8404with the iwata gun you are using

@robertwalter6688 oooh. The Iwata setting is pretty fine to me with the open fan and fluid

Gots be Sata CC gun.

Yeap with the LPH-300.

Haha. I preciate it brother. 💪🏾💪🏾💪🏾

Haha. True.

Lol. Nah. I’m just not posting much because I don’t get that much views so it’ll be every few weeks when I post until I can get views.

No I haven’t tried it. I have heard about it.

@@treysterthepainterturner8404 BEST OF BOTH WORLDS, SATA/IWATA ALL IN ONE GUN

Hey are you using the 1040 setup in the Sata

I just started using 100line I see you didn’t bring your m50x to the sealer do you have any problems with dry edges in between sealer and wet bed

@robertwalter6688 yes I only use the 10/40 when I use the 40 binder for the color.

Not my material. I didn’t pay for it.

No problem brother. Preciate u watching.

@@treysterthepainterturner8404 I already followed you on TikTok, but I'm still having problems with the ingredients you use, here in Indonesia it's still hard to get them.

Your painting technique is very good, I really enjoyed practicing it

I preciate it brother💪🏾💪🏾💪🏾

Having problems with what?

No lie. I’ve been getting great great color match.

Well for one u used rattle cans to paint a bumper. U need actual paint gun and small compressor at least. But u can dry to wet sand it and buff it and see how that do.

@@treysterthepainterturner8404I’ll try that Friday coming up as it’s my next day off I can spend some time on it. But I personally already have a 30gal Campbell compressor in my detached garage. Think it does 10.2@90psi. As long as this is good enough for painting, it would great to know the tools needed to get the job done right. If you don’t already have a video, it would be great to show one showing the tools you use for each type of paint, what kind of paint can be used and why specific size nozzles are needed if I’m saying it right like 1.2,1.3,etc. I’m completely new to this but I already have a setup where I can once in the blue spray paint a part without affecting anyone or anything else. Thanks again for the response!

@Lafiro if I did do stuff from the garage I would definitely do vids on that but unfortunately I don’t for now. But that 30 gal would do great for small jobs like bumpers and only 2 panel jobs. But if u wanna do whole car jobs. U would have to least have a 60 to 80 gal compressor and I think a 1.3 would work for all condition jobs. 1.2 would do great also too.

@@treysterthepainterturner8404 I dont think I will ever do cars. Just touch ups. What I did was a disaster / learning curve. My garage closed on my bumper and took with it the paint and sliced into the plastic. I had to put putty, sand it and paint it... multiple times because I kept messing up. Got the rattle cans and some areas look great and shinny. But majority is very bumpy looking and dull. I already used multiple foam pads and different grades of polish compound and the bumper feels super smooth. But maybe the issue is the paint layer itself. Either way, it was my first time every and I can't say I did a bad job at all. At least you can't tell unless you absolutely go looking for it. I blended it correctly too. But I am still left with the same burning question; money not being an object. What spray gun(s) could I get for these small jobs. I see them cheap on amazon for example and then a few hundred for a ws400 or ls400. But I don't know the difference and again, just want the best I can get. I could use them to paint cabinet doors for my wife next. Don't see why not?! lol Correct me if I am wrong and I shouldn't do that with car paint.

@Lafiro got with a Lph-300 that will work great for bumper jobs and stuff it’s a perfect gun you can spray that gun at 18 psi and it gives u great Basecoat lay down and Clearcoat.

1.4

Wait I’m tryna understand what u saying. Lol

@@treysterthepainterturner8404 the painter here in Wisconsin West Bend Crash Champions. Said I was uplying the Glasurit 100 line with too much fenes 😆

@@treysterthepainterturner8404 I get the application method from seeing your videos

@raymondrodriguez1158 oh u was putting too much paint material on.

@@treysterthepainterturner8404 yup

🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣

I think that’s what it means. The obs is for the water base. Like the none wet on wet base.

​​@@treysterthepainterturner8404 NO pal trey you Google it that what it's mean split nozzle technology OPTIMUM BASE COAT PAINT SETTINGS

No I wet bed it first the I base and clear. It’s a 1.5 coat application with this paint system

Yes 1.3 nozzle.

Lol. Who don’t care for a glass finish. A beautiful slick glass finish. Lol

Sounds right to me.

​@@treysterthepainterturner8404 SATAJET CC IS KING 🤴 trey is there mutch difference with the iwata spray WS400 1.3 clear coat paint gun 🔫

@ANDY-we7mr they very different

It’s working great.

Yes sir

@@treysterthepainterturner8404 I must’ve received a defective one lol. Mine has never liked wide open. I still get good results but at half a turn open from closed 🤷‍♂️ I think I’ll buy a new cap see if that fixes it. Thanks. Good work man 🫡

@Correctedpaints it should work. U can get the cap from SPSupplies.com. There where I got mine for my Sata Jet 5500rp

26 psi

Lmao. It’s a great gun. I can’t complain about it.

HV30 and 1.4 Tip

HV30 and 1.4 tip

Lol. This glasurit not spies Hecker.

@@treysterthepainterturner8404 my bad I’m trippin I guess lol

@JohnnyBravo02 lol. I use to use spies Hecker pamacron almost a year ago.

@@treysterthepainterturner8404 ohhhh okay. I just found your channel a few weeks ago and was checking out your videos . That’s probably why I thought you were still spraying that

@JohnnyBravo02 nope. On Glasurit 100 Line now. Since November 6, 2023.

Yes sir. Lol

It’s a 1.2 on it with the c1 yes.

​@treysterthepainterturner8404 GOT A PRICE MATE,ON MY CAR 🚗 2 WINGS,PAINTED AND BLENDED BONNET AND THE FRONT BUMPER MATE,AND TREY HE,SAID HE LINE EVERYTHING UP I HAVE SOLD MY POP UP SPRAY BOOTH 😑 SHOUL HAVE KEPT IT MATE TREY THAT DEVIBLISS OLD SCHOOL AGAINST THE, IWATT SERIES 2 W400 1.3 HD WHITCH ONE IS THE BEST 😅😊

😂😂😂 ig u makes the 1st best. Haha 🤣

@@treysterthepainterturner8404 😁😁😁 🤜🏼🤛🏼

@thetriggerman954 🤣🤣🤣 it’s all good. You number 1 🤣🤣😭😭😭

@@treysterthepainterturner8404 it's a tie 🤝 just two hard working brothers doing our thing. ☝🏼🙏🏼

@thetriggerman954 true story. 💪🏾💪🏾

💪🏾💪🏾💪🏾

U have to spray the blend at a 45 degree angle

A lot of Cree what u talking about?

On the Sata it’s 1.3

Oh u gone love the paint system. All the colors seem to match. Tips no not really. The only difference will be that you’ll be moving a lil slower when basing and make sure to stay 6 in and do a 90% overlap to make sure to have coverage other than that that’s it brother.

No I haven’t.

Haha. I preciate it bro 💪💪💪

Preciate it. 💪💪💪