I wonder how thick the Al foil must be. It would be even less expensive o use common Al foil from my kitchen. Might have to double or triple layer it, though.

Mike did you get your trap and meter??? How you been buddy? Hope you're doing well. Sincerely Mike

Great review! I was wondering, how comfortable is it to use when you're on the couch? When pressed up to the couch, how much of the table itself overhangs?

Thinking our ancient dining room table should be stripped, but who wants to do that???? Maybe I should give butcher block a try? Thanks for all your tips!

awesome❤️😁 Thank you!

I don't have aluminum tape but I do have aluminum foil. It should work the same. Just glue it to the paper then use the clear tape on top.

My right foot would own your mallet.

You forgot to check to make sure the GPU, CPU heatsink and ram weren't dislodged during shipping.

I read to go 10 miles from your house.

rawr slay queen

Ty

Thanks for that. I fixed two cases. I could not find wheels so I bought a set of 4 at a skateboard shop. The bearing fell apart on one of my cases and the ball-bearings went everywhere. So I went back to the skateboard shop and they put new bearings in the wheels. It all worked and good as new if not better.

Glad to see that your video has generated some momentum on this topic, which for some reason hasn't become widespread. The idea that's been going around in my head is that there’s an interesting range between buying one factory-made or DIY it as cheaply as possible, where a bit more spending could be justified. I think about the countries where this product doesn’t reach. It occurred to me to use fishing rod parts for the stick. Just an idea.

i bet u can fly both drones with the controller and phone placed on the ground while stand 10 metres away, that would soooo amazing

Nice😊

0:13 requires someone to be in the house though.

try metal on back of drone cars are metal not plastic

Can you make a single zipper into a double?

I wish you showed that it works. But why not put HVAC aluminum tape on both sides rather than just one for the size?

Very interesting test flight. Looking forward to seeing you got it locked on and follow each other. 🥰👍💪🙏

I want this!!! Is there anyone who can help me get one?! I don't think they were for sale in the Netherlands 😢

😂😂 Just like the instructions translated by ????😅❤

Sir you did mention where you purchased the product.

Thanks for the video. Does it measure and show the hottest and the coolest points?

I see quality tuba its a channel hes the double belled sousa

Miraculous! It saved my jeans! 👖 Thank you! ❤

I use the balloon pump for our fireplace, makes starting fires easier

TIP: You can rename de NEO drive port to (i.e) Neo. Just write click on drive and choose Rename

Man, this guy is a CLOWN! but his strategies worked.

Where to buy the wheel housing. That's the damage one on my luggage.

They make that shit here but I’ve never tried it. Thanks to you, I’ll give it a go this summer. 🫡

why do you scream?

thanks this saved me a bit of a headache as the YKK zipper on my milwaukee heated jacket (Owned less than a year) failed to zip and I had to mess with it for 30 mins or more just to try to zip it up, thank you!

What really ticks me off is this baloney of "nominal" vs "actual". Furnace filters "come" in nice inch increments. Lets' take a 24"x15"x4" for instance. When you go to purchase one, there are all kinds of shortened versions. It's worse than lumber. Not only are they smaller, but how much smaller is all over the place. This is crazy. The filters should be manufactured to be as close to the "nominal" as possible. Obviously there is going to be a little slop. The actual opening should be a bit oversize, perhaps 1/8". This would take care of 99% of fitment issues. For my last filter I had to shim it with wood. My new one is a little bigger, so no shim required. This is nuts.

Sorry, not a good test. Go to a hilly area when it's icy and walk around for a while on as many surface types and angles as you can. Nothing else can tell you whether the product will handle it. A flat sheet is only one of many potential shapes of ice found outside and one of the easier to design for.

Has none done. TEST climbing open back concrete stairs , lots of places have open back stairs???

Current prices if you want it delivered before Christmas in Australia is Neo + Fly more combo which include RC-N3 controller (DJI Neo Two-Way Charging Hub x 1, DJI Neo Aircraft x 1, DJI Neo Propeller Guard (Pair) x 1, DJI RC-N3 RC Cable (USB-C Connector) x 1, DJI Neo Spare Propellers (Pair) x 1, DJI Neo Gimbal Protector x 1, DJI Neo Intelligent Flight Battery x 3, DJI RC-N3 Remote Controller x 1, Type-C to Type-C PD Cable x 1, Screwdriver x 1, DJI Neo Spare Propeller Screw x 4) is about $546AUD The other alternative would be the DJI Mini 4K Fly More Combo (Propeller Holder ×1, Spare Propellers (Pair) ×3, Screwdriver ×1, DJI RC-N1 RC Cable (Standard Micro-USB Connector) ×1, Gimbal Protector ×1, DJI Mini 4K ×1, DJI Mini 2 Intelligent Flight Battery ×3, Shoulder Bag ×1, DJI RC-N1C Remote Controller ×1, DJI RC-N1 RC Cable (USB-C Connector) ×1, DJI RC-N1 RC Cable (Lightning Connector) ×1, Spare Screws ×18, USB-C Data Cable ×1) is about $707AUD The DJI Mini 4 Pro is a much more expensive unit

Blud you said I thought this was the museum I know what I heard and your telling other people that you said should. Well you did in the caption but, not in the video blud so idk what you mean maybe say that in the video next time.

You should have shown your viewers where in put the chrome piece each time, then closes the door and attach the other piece. Instead, every time you inserted the chrome piece the door was only open a tad and nobody could see where you attached that chrome piece,

I had that on my last house. The leaves would accumulate on top of the mesh. I ended up just accepting I had to clean the gutters regularly.

Thank you for the informative and honest video 👍!

I ordered it on Temu for 10$, but I respect that you made it on your own

Fellow senior thinking about jumping into drones. I am looking at these two options exactly what you are featuring.

This pack should mod GREAT! I loved working on my Spirit pack a few years ago, but I always wished it was full scale. Still, it ended up looking really good, scale notwithstanding, so this should be a snap to mod into something really cool! I have a HasLab pack now that I've modded into an 84 pack, but otherwise, I'd definitely be picking up one of these and hitting up Etsy for soooo many mods. 😆 Modding and weathering Ghostbusters gear is something I find really relaxing, so I like to put in a lot of time on each prop, and everything is always a work in progress.

I have the HasLab pack now, but man, I wish Spirit had a full size pack when I was doing my Spirit pack mods! The wand scale especially makes a huge difference. The OG Spirit packs weren't scaled too badly, but the wands were ridiculously undersized. 😆

Not many squirrels can outsmart a .22

Why wouldn't you cut an oversized piece, lay the patch on, and cut the excess off? Seems easier.

Dec 5 update on Bird Strikes: I've had birds stray very close to my drones in the past, not sure if they feels threatened or just curious. Either way, since installing the tape on my aircraft my feathered freinds have steered clear of quads, and all is good in the skies now...

Great ideas !

Bros in love of the s*n 👑⌛️