The Brown wire on the driver side will go to the Alternator and the tan one will go to the oil pressure gauge

Could you tap in to the power from the 12v in the rear near the stock sub location

Quick QA we have a 2007 civic 5 speed an every no an then the speedo work an sometimes it dnt I have to disconnect the battery for a day then the speedo works agin for a few day an the it out agin ??

Just popped my 15in Kicker Comp R sub. Hope I can fix it myself 🤞🏻

I still get a momentary rattle/knock on a cold start up.

Biggest con going.

Got it, thx 👍💯

Exactly the info I needed to put my old kitchen cabinets up in the garage. Thank you.

Whats the best glue to use my sspider is loose 💔🙏🏼

Thank you. Super helpful in understanding adjustments.

Styrene takes 1-2 days to breakdown in the environment, so you're just sending it to your neighbors. Install a activated carbon filter somewhere in line.

Heads up, the reason that that one gave you so much trouble and you needed the Allen wrench and adjustable is because you backd the nut off too far when you installed your joint separator. The joint separator pushed down on the nut not the stud probably deforming the threads on the one side.

Come on Chevy! You can design better than that crap ! Pain in ass

You don't even have to remove the diff cover to do all that? 2000s are wild.

Why would you check the 3/16 gap between the converter and flexplate if you used all the parts from the v6? Isnt it going to be the same since the spacer is on the other side of the flex plate? Im just trying to understand why there would be a different gap between them.

Excellent job illustration 🤓👍🏼‼️

Loved it. Real top G sending a stogie at the same time. Scotch on rocks is the only thing I see missing. Loved it.

do the shelves come with it, or are they extra?

Your way worked the 1st time i tried it! One video on here shows holding the gas pedal as part of the sequence, but that was not correct and would not work on mine. Thanks!!👍👍

TL:DR - Use ONLY NTK -or- Mopar O2 Sensors (JK's are very sensitive and many that claim they "will work" do not). Was down a rabbit hole not being able to get rid of a P0420 on my 2011 JK Wrangler. Ended up replacing the bank 1 O2 sensors with a Chinese brand off Amazon thinking that would fix it - NOPE! ... tested replacement o2 sensors and they were giving off too 6 ohms across heater element. CEL's for "high-voltage" persisted (NTK & Mopars give off 3.5 ohms). Almost bought new Catalytic convertors (also tried cleaning the cats & even using the spark plug non-fouler trick but CEL's persisted due to cheapo O2 sensors - non-foulers will not work if your cheap sensors are sending incorrect voltages to the PCM). After much research, discovered the JK is super sensitive to o2 sensors. Ended up buying the NTK brand and they worked perfectly. DO NOT USE ANY OTHER o2 SENSOR on a JK than NTK or MOPAR (Bosch is too sensitive and will trigger CEL's). NTK website has a part lookup function (note: upstream and downstream are different part numbers). NTK are more expensive but TOTALLY worth it. Cheap sensors are not worth the hassle. Another key tip: O2 sockets are not meant to "break loose" difficult sensors - the wrench (link below), with a hammer, worked perfectly for breaking loose the sensor (after broken loose, then you can use the slotted sensor socket). Also, use PB blaster the night before. Note: Always use a thread chaser & high-temp anti-seize before inserting new sensor www.amazon.com/gp/product/B00I6TBHE0/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

It will not work with the BestA tv unit, correct?

AVH-X1800S dead in the water, need to modify FAT for compatibility, not sure this head unit is compatible now which is kind of annoying….Any ideas outside of buying a Bluetooth which is nice but would rather just the USB for security reasons…

Alguien sabe cómo se llama esa pieza del tablero la busco por Internet pero no me aparece

Can it be done vertically also?

Thank you for making this video🙏🏼!! Idk if I’m paranoid or what, but twice now my gas cap has been off. I don’t think anyone is taking my gas but maybe? To be sure, getting one of these!! Doesn’t look too hard to install either.

Any light beam adjustments needed?

Very helpful!!

Will it work for komplement hinges as well?

Were the “J” hook/bracket things from IKEA? I think mine is missing them and I was trying to locate a parts number on their site.

Great descriptive video! Will help me a lot when I do the install.

Shave down the top rubber and trim all that extra plastic on the top makes it a whole lot easier

Great idea. Thank you!

I had the same issues, turned out it was the BCM

Have you had any problems running that k&n filter?

Thanks

Just got a 2004 Grand Cherokee limited and stumbled on this video 👍 thanks 👍

The struts unfortunately are the weak point. Badly designed

I just bought a 06 civic,,,, I’m saying to myself what did I do,,,,, lol. There’s oil leaks all over it. This is a stupid design. I’ve been a Lexus yota person for 30 yrs but always liked this civic but man the more and more I dive into this it’s a head case. Leaks from the VVT solenoid on that back side passenger. Don’t forget there’s another cam cap on other side that’s really a pain in the azz to remove and there’s a cover on the back of the engine you gotta remove a lot to get to it. It’s the most difficult one next to head gasket replacement if needed. lol. Mine has 124,000 by the way.

Tell me you didn’t read the directions without telling me you didn’t read the directions. The rail is designed to have a built in centerline. You flip it upside down to mark your holes. That give you your 1.5” down without having to guess. Just mark where you want the top of your cabinets to fall.

Just replaced my anode in a Geospring. It was really difficult to get the old anode out. The corrosion on the old anode makes its shape uneven, and it doesn't just slide out - lots of scraping, wiggling and force needed to remove it. I took the small and large nuts off, then put a pair of vicegrips on the bolt, and eventually got the old one out.

A new fob battery did the trick for mine, too!! Fortunately I found this vid PRE-rabbit holes!! I just wanted to add that, before I replaced the CR2032, I would sporadically get 3 short horn beeps upon exiting the vehicle.

Thanks. Saved me 100

Hey i tried wiring the ac on my 5.3 s10 swaped like u did! the dark green wire from fuse box that plugs into ac conpressor is not getting power i tried using a jumper wire from terminal 30 to 87 on relay it works does the Ecu control the power to the dark green wire for the ac compressor?

Thanks bro.. made it simple and easy!!

I’ve never seen anybody install the crankshaft still after they put the plate back on. Did that still end up leaking or did it hold up?

Maybe the joints are loose! . Saludos desde Canadá

Hello, will the bridge from jl to jk be suitable?

You could have done the assembly a lot easier

Thank you for the clear directions. I was struggling to get the doors aligned and your video helped me. I had to watch few times to understand which screws you are adjusting but got it finally.

Thanks so much for the info…I put my closet rack back up yesterday using this video.